Official DistributorSKU
MPN
EMG 30-SPK-10K LIN
Weight
0.068 kg
This product is Not Cancellable/Not Returnable
Series EMG
EMG 30-SPK-10K LIN - Setpoint adjuster
Cascading setpoint value potentiometer, for selecting presettable setpoints via a 24 V control signal, resistance value 10 kΩ
Technical Specifications
Electrical properties
| Test voltage relay winding/relay contact | 1 kV AC |
Coil side
| Nominal input voltage UN | 24 V ±25 % |
| Typical response time | < 10 ms |
| Typical release time | < 10 ms |
| Protective circuit | Damping diode, polarity protection diode |
| Operating voltage display | yes |
Potentiometer
| Potentiometer, resistance value | 10 kΩ ±20 % |
| Linearity | 5 % (of final value) |
| Potentiometer, current-carrying capacity | 0.5 W |
Switching:
| Contact Material | Fixed contacts: Silver palladium (AgPdAu), 3 µm hard gold-plated |
| Contact Material | Mobile contacts: Silver palladium (AgPd) |
| Maximum Switching Voltage | 10 V (depending on application) |
| Mechanical service life | > 2x 107 cycles |
Connection data
| Connection Method | Screw connection |
| Stripping length | 8 mm |
| Screw thread | M3 |
| Conductor cross section rigid | 0.2 mm² ... 4 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
Dimensions
| Width | 30 mm |
| Height | 75 mm |
| Depth | 68 mm |
Material specifications
| Color | green (RAL 6021) |
| Housing Material | Polycarbonate fiber reinforced PC-F |
Ambient conditions
| Ambient Temperature (Operation) | 0 °C ... 40 °C |
Mounting
| Mounting Type | DIN rail mounting |
| Mounting Position | any |
Why Proax for Phoenix Contact 2942137?
Proax is an authorized distributor of Phoenix Contact 2942137 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
Relay module, with soldered-in miniature switching relay, contact AgNi): medium to large loads, 2 PDT, input voltage 220 V DC- EMG 30-SD/US/15A, Rail-mounted single receptacle for mounting on 35 mm DIN rail per EN 60715. Housing color: black. Receptacle style: USA. Connection type: screw.
2943929 - Voltage regulator module with fixed-voltage regulator, input 18 V-23 V AC/20 V-32 V DC, output 15 V DC/0.5 A- 2943916 - Voltage regulator module with fixed-voltage regulator, input 16 V-21 V AC/19 V-30 V DC, output 12 V DC/0.5 A
- 2943903 - Voltage regulator module with fixed-voltage regulator, input 10 V-16 V AC/ 12 V-23 V DC, output 5 V DC/0.5 A
2947860 - Electronic housing, with snap foot for DIN rail EN 50022 for PCB insertion, without screw connection terminal blocks and cover
Electronic housing set, consisting of electronic housing and printed circuit termination blocks, pitch 5PCB terminal block, nominal current: 24 A, nom. voltage: 400 V, pitch: 5 mm, number of positions: 2, connection method: Screw connection with tension sleeve, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: green, The article can be aligned to create different nos. of positions!Electronic housing, with snap foot for DIN rail EN 50022 for PCB insertion, without screw connection terminal blocks and coverPCB terminal block, nominal current: 24 A, nom. voltage: 400 V, pitch: 5 mm, number of positions: 3, connection method: Screw connection with tension sleeve, mounting: Wave soldering, conductor/PCB connection direction: 0 °, color: green, The article can be aligned to create different nos. of positions!PCB terminal block, nominal current: 24 A, nom. voltage: 400 V, pitch: 5 mm, number of positions: 4, connection method: Screw connection with
2869715 - Electronic housing, for PCB insertion, without screw connection terminal blocks and cover
2947886 - Covering hood, for the contact and dust-protected encapsulation of the components, in transparent design. Height: 7.5 mm, width: 30 mm
2947909 - Covering hood, for the contact and dust-protected encapsulation of the components, in green design. Height: 52 mm, width: 30 mm
2947899 - Covering hood, for the contact and dust-protected encapsulation of the components, in transparent design. Height: 15 mm, width: 30 mm
