
2904710
SKU
PHX2904710
MPN
VIP-PA-PWR/4X10COMBI/ 6,0M/S7
Weight
3.509 kg
This product is Not Cancellable/Not Returnable
Series VIP-PA-PWR
VIP-PA-PWR/4X10COMBI/ 6,0M/S7 - Front adapter
VIP power cabling, universal front adapter for connecting all common 40-pos. SIMATIC S7-300 I/O modules, via four cables each with a 10-pos. COMBI connector, pitch: 5.2 mm
Technical Specifications
Insulation characteristics
| Insulation | Basic insulation |
| Insulation | Basic insulation |
| Overvoltage category | III |
| Pollution degree | 2 |
Electrical properties
| Operating voltage (AC/DC) | ≤ 250 V AC/DC |
| Nominal operating mode | 100% operating factor |
| Current (per single-core wire, 40°C) | ≤ 6 A |
| Current (per single-core wire, 60°C) | ≤ 4 A |
| Current (Total current per cable, 40°C) | ≤ 20 A |
| Current (Total current per cable, 60°C) | ≤ 16 A |
| Rated Insulation Voltage | 260 V |
| Rated surge voltage | 4 kV |
Supported controller SIEMENS S7-300 / ET 200 M
| Suitable I/O card | 6ES7321-1BL00-0AA0 |
| Suitable I/O card | 6ES7321-1EL00-0AA0 |
| Suitable I/O card | 6ES7321-1CH00-0AA0 |
| Suitable I/O card | 6ES7321-1FF10-0AA0 |
| Suitable I/O card | 6ES7322-1BL00-0AA0 |
| Suitable I/O card | 6ES7322-8BH10-0AB0 |
| Suitable I/O card | 6ES7322-5GH00-0AB0 |
| Suitable I/O card | 6ES7322-5FF00-0AB0 |
| Suitable I/O card | 6ES7322-5HF00-0AB0 |
| Suitable I/O card | 6ES7322-1HF10-0AA0 |
| Suitable I/O card | 6ES7323-1BL00-0AA0 |
| Suitable I/O card | 6ES7331-7NF00-0AB0 |
| Suitable I/O card | 6ES7331-7NF10-0AB0 |
| Suitable I/O card | 6ES7331-1KF02-0AB0 |
| Suitable I/O card | 6ES7331-7PF01-0AB0 |
| Suitable I/O card | 6ES7331-7PF11-0AB0 |
| Suitable I/O card | 6ES7331-7PE10-0AB0 |
| Suitable I/O card | 6ES7332-5HF00-0AB0 |
| Suitable I/O card | 6ES7326-1BK02-0AB0 |
| Suitable I/O card | 6ES7326-1RF00-0AB0 |
| Suitable I/O card | 6ES7326-2BF41-0AB0 |
| Suitable I/O card | 6ES7326-2BF01-0AB0 |
| Suitable I/O card | 6ES7326-2BF10-0AB0 |
| Suitable I/O card | 6ES7336-1HE00-0AB0 |
Controller level
| Connection Method | Plug-in connection |
| Note | Can be plugged onto 40-pos. I/O modules |
Field level
| Connection Method | COMBICON connectors |
| Number of Connections | 4 |
| Number of Positions | 10 |
| Pitch | 5.2 mm |
Cable
| Length | 6 m |
Cable/line
| Number of Positions | 10 |
| Shielded | no |
| Conductor type | Round cable set |
| Conductor structure signal line | 16x 1.80 mm |
| AWG Signal Line | 21 |
| Conductor Cross Section | 10x 0.5 mm² |
| Outer sheath, material | PVC |
| External sheath, color | gray |
| Conductor material | Bare Cu litz wires |
| Cable resistance | ≤ 40 Ω/km |
| Insulation resistance | ≥ 20 MΩ*km |
| Halogen-free | no |
| Flame resistance | UL VW-1 |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -20 °C ... 60 °C |
| Ambient temperature (storage/transport) | -20 °C ... 80 °C |
Standards and Regulations
| Standards/regulations | DIN EN 50178 |
| Standards/regulations | IEC 60664 |
Mounting
| Mounting Position | any |
Notes
| Notes on operation | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
Accessories
QTC 1,5/ 1P BU - Feed-through terminal block, nom. voltage: 500 V, nominal current: 17.5 A, number of connections: 2, connection method: Fast/plug-in connection, 1st level connection left, Rated cross section: 1.5 mm2, cross section: 0.25 mm2 - 1.5 mm2, 1st level connection right, mounting type: NS 35/7,5, NS 35/15, color: blue
ST 2,5-TWIN-TG/1P - Disconnect terminal block, The max. load current must not be exceeded by the total current of all connected conductors.Current and voltage are determined by the plug used., nom. voltage: 400 V, nominal current: 20 A, 1st level connection left, connection method: Spring-cage/plug-in connection, Rated cross section: 2.5 mm2, cross section: 0.08 mm2 - 4 mm2, mounting: NS 35/7,5, NS 35/15, color: gray
PTTB 2,5/2P BU - Double-level terminal block, Current and voltage are determined by the plug used., nom. voltage: 500 V, nominal current: 22 A, connection method: Push-in / plug connection, 1st and 2nd level, Rated cross section: 2.5 mm2, cross section: 0.14 mm2 - 4 mm2, mounting type: NS 35/7,5, NS 35/15, color: blue
STTB 2,5/2P BU - Double-level terminal block, Current and voltage are determined by the plug used., nom. voltage: 500 V, nominal current: 22 A, connection method: Spring-cage/plug-in connection, 1st and 2nd level connection left, Rated cross section: 2.5 mm2, cross section: 0.08 mm2 - 4 mm2, 1st and 2nd level connection right, mounting type: NS 35/15, NS 35/7,5, color: blue
Why Proax for Phoenix Contact 2904710?
Proax is an authorized distributor of Phoenix Contact 2904710 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended



















