Official DistributorSKU
MPN
2884774
Weight
0.25 kg
FL LCX CABLE METER - Antenna
The leaky wave conductor is a "wireless cable" which acts as an antenna and radiates over the entire length. The range is limited here. Track-guided systems can thus be properly supplied even under complex conditions.
Technical Specifications
Product properties
| Gain | 0 dBi |
Electrical properties
| Frequency band | 2.4 GHz |
| Frequency Range | 2.4 GHz ... 2.6 GHz |
| Impedance | 50 Ω |
Connection technology
| Connection Method | open end |
Dimensions
| Diameter | 13.7 mm |
Material specifications
| Material | Al Cu wire |
| Material | Copper corrugated tube |
| Material | PE foam |
| Material | Polyethylene |
Cable/line
| Cable weight | 250.00 g/m |
| Cable resistance | 2.9 Ω/km (DC inner conductor) |
| Cable resistance | 4 Ω/km (DC phase conductor) |
| Smallest bending radius, fixed installation | min. 32 mm (One-time bending) |
Ambient conditions
| Ambient Temperature (Operation) | -40 °C ... 85 °C |
| Ambient temperature (storage/transport) | -70 °C ... 85 °C |
| Ambient temperature (installation) | -25 °C ... 60 °C |
Standards and Regulations
| Standard designation | Halogen-free |
| Standards/specifications | IEC 60754-1 / -2 |
| Standard designation | Flame retardancy |
| Standards/specifications | IEC 60332-1 / -3.C |
Mounting
| Assembly instructions | Recommended clamp distance 0.33 m |
Why Proax for Phoenix Contact FL LCX CABLE METER?
Proax is an authorized distributor of Phoenix Contact FL LCX CABLE METER and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Alternate Names | FLLCXCABLEMETER |
| Pack Size | 1 |
Recommended
2702518 - The length of the leaky wave conductor must be adapted to the special length in the application. Connectors are then installed at both cable ends. Wireless devices can be connected to these via a flexible connecting cable.
2884965 - The length of the leaky wave conductor must be adapted to the special length in the application. Connectors are then installed at both cable ends. Wireless devices can be connected to these via a flexible connecting cable.
2700677 - Antenna cable, outside diameter: 5 mm (0.2 in.), inner conductor: stranded, attenuation: 0.3 / 0.5 / 0.8 dB at 0.9 / 2.4 / 5.8 GHz, connection: 2 x N (male), cable length: 0.5 m (1.6 ft.)
2884978 - A termination resistor must be screwed on at the end of the leaky wave conductor which does not contain any wireless part. It guarantees an antenna cable termination with the correct impedance and is important for every wireless installation.
2702702 - The termination resistor is screwed onto an unused antenna connection of a WLAN device, e.g., in leaky wave applications. This terminates the connection with the correct impedance and prevents undesirable emission.
2700425 - The termination resistor is screwed onto an unused antenna connection of a WLAN device, e.g., in leaky wave applications. This terminates the connection with the correct impedance and prevents undesirable emission.
2884981 - Special alignment tool for the accurate mounting of connectors on the leaky wave conductors.
2702519 - Special alignment tool for the accurate mounting of connectors on the leaky wave conductors.
