Official DistributorSKU
MPN
2702702
Weight
0.007 kg
This product is Not Cancellable/Not Returnable
Series FL-LCX
FL LCX 50-OHM-RSMA - Termination resistor
The termination resistor is screwed onto an unused antenna connection of a WLAN device, e.g., in leaky wave applications. This terminates the connection with the correct impedance and prevents undesirable emission.
Technical Specifications
Electrical properties
| Frequency Range | 0 GHz ... 6 GHz |
| Impedance | 50 Ω |
Connection data
| Connection Method | RSMA (male) |
Dimensions
| Length | 17.4 mm |
| Diameter | 8 mm |
Ambient conditions
| Ambient Temperature (Operation) | -40 °C ... 85 °C |
Why Proax for Phoenix Contact FL LCX 50-OHM-RSMA?
Proax is an authorized distributor of Phoenix Contact FL LCX 50-OHM-RSMA and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Alternate Names | FLLCX50OHMRSMA |
| Pack Size | 1 |
Recommended
2700425 - The termination resistor is screwed onto an unused antenna connection of a WLAN device, e.g., in leaky wave applications. This terminates the connection with the correct impedance and prevents undesirable emission.
2884978 - A termination resistor must be screwed on at the end of the leaky wave conductor which does not contain any wireless part. It guarantees an antenna cable termination with the correct impedance and is important for every wireless installation.
2884774 - The leaky wave conductor is a "wireless cable" which acts as an antenna and radiates over the entire length. The range is limited here. Track-guided systems can thus be properly supplied even under complex conditions.
2884965 - The length of the leaky wave conductor must be adapted to the special length in the application. Connectors are then installed at both cable ends. Wireless devices can be connected to these via a flexible connecting cable.
2702518 - The length of the leaky wave conductor must be adapted to the special length in the application. Connectors are then installed at both cable ends. Wireless devices can be connected to these via a flexible connecting cable.
2700677 - Antenna cable, outside diameter: 5 mm (0.2 in.), inner conductor: stranded, attenuation: 0.3 / 0.5 / 0.8 dB at 0.9 / 2.4 / 5.8 GHz, connection: 2 x N (male), cable length: 0.5 m (1.6 ft.)
2884981 - Special alignment tool for the accurate mounting of connectors on the leaky wave conductors.
2702519 - Special alignment tool for the accurate mounting of connectors on the leaky wave conductors.
