
SKU
MPN
VAL-US-48/65/1+1V-FM
Weight
0.262 kg
Series VAL-US
VAL-US-48/65/1+1V-FM - Type 1 surge protection device
Surge protective device, two channels with remote indicator contact for 48 V DC, 2-wire plus ground
Technical Specifications
Product properties
Product family | VALVETRAB US |
IEC test classification | I / II |
IEC test classification | T1 / T2 |
EN type | T1 / T2 |
IEC power supply system | DC |
Type | DIN rail module, two-section, divisible |
Number of Positions | 2 |
Surge protection fault message | Optical, remote indicator contact |
Insulation characteristics
Overvoltage category | III |
Pollution degree | 2 |
Indicator/remote signaling
Connection name | Remote fault indicator contact |
Switching function | Changeover contact |
Operating Voltage | 5 V AC ... 250 V AC |
Operating Voltage | 30 V DC |
Operating current | 5 mA AC ... 1.5 A AC |
Operating current | 1 A DC (30 V DC) |
Connection data
Connection Method | Screw connection |
Screw thread | M5 |
Tightening torque | 4.5 Nm (1.5 mm² ... 16 mm²) |
Tightening torque | 4.5 Nm (25 mm² ... 35 mm²) |
Stripping length | 16 mm |
Conductor cross section flexible | 1.5 mm² ... 25 mm² |
Conductor cross section rigid | 1.5 mm² ... 35 mm² |
Conductor cross section AWG | 15 ... 2 |
Remote fault indicator contact
Connection Method | Screw connection |
Screw thread | M2 |
Tightening torque | 0.25 Nm |
Stripping length | 7 mm |
Conductor cross section flexible | 0.14 mm² ... 1.5 mm² |
Conductor cross section rigid | 0.14 mm² ... 1.5 mm² |
Conductor cross section AWG | 28 ... 16 |
Dimensions
Width | 35.6 mm |
Height | 96.8 mm |
Depth | 77.5 mm (incl. DIN rail 7.5 mm) |
Horizontal pitch | 2 Div. |
Material specifications
Color | black (RAL 9005) |
Flammability rating according to UL 94 | V-0 |
CTI value of material | 600 |
Insulating material | PA 6.6/PBT |
Material group | I |
Housing Material | PA 6.6 |
Housing Material | PBT |
Protective circuit
Mode of protection | (DC+) - (DC-) |
Mode of protection | (DC+/DC-) - PE |
Direction of action | 1L-N & N-GND |
Nominal voltage UN | 60 V AC ±10 % (TN-S) |
Nominal voltage UN | 60 V DC ±10 % |
Nominal voltage UN | -48 V DC ±10 % (RRH) |
Maximum continuous voltage UC | 100 V DC |
Rated load current IL | 80 A |
Residual current IPE | ≤ 0.6 mA |
Nominal discharge current In (8/20) µs | 12.5 kA |
Total discharge current Itotal (10/350) µs | 12.5 kA |
Short-circuit current rating ISCCR | 5 kA |
Voltage protection level Up (DC+) - (DC-) | ≤ 0.4 kV |
Voltage protection level Up (DC+/DC-) - PE | ≤ 0.4 kV |
Residual voltage Ures | ≤ 0.4 kV (at In) |
Residual voltage Ures | ≤ 0.35 kV (at 10 kA) |
Residual voltage Ures | ≤ 0.3 kV (at 5 kA) |
Residual voltage Ures | ≤ 0.25 kV (at 3 kA) |
TOV behavior at UT | 130 V DC (5 s / withstand mode) |
Response time tA | ≤ 25 ns |
Max. backup fuse with V-type through wiring | 80 A (gG) |
Max. backup fuse with branch wiring | 160 A (gG) |
Ambient conditions
Degree of Protection | IP20 (only when all terminal points are used) |
Ambient Temperature (Operation) | -40 °C ... 80 °C |
Ambient temperature (storage/transport) | -40 °C ... 80 °C |
Altitude | ≤ 2000 m (amsl) |
Permissible humidity (operation) | 5 % ... 95 % |
Shock (operation) | 30g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
Vibration (Operation) | 7.5g (10 ... 500 Hz / 2.5 h / X, Y, Z) |
UL specifications
Short-circuit current rating (SCCR) | 5 kA (DC) |
Voltage protection rating VPR (DC+) - (DC-) | 400 V |
Voltage protection rating VPR (DC+) - G | 400 V |
Voltage protection rating VPR (DC-) - G | 600 V |
UL type | type 1 |
Nominal discharge current In | 20 kA |
Maximum Surge Current per Phase | 65 kA |
Mode of protection | (DC+) - (DC-) |
Mode of protection | (DC+) - G |
Nominal Voltage | 48 V DC |
Power distribution system | DC |
SPD Type | 1 |
UL indicator/remote signaling
Operating Voltage | 125 V AC |
AC operating current | 1 A AC |
UL connection data
Tightening torque | 30 lbf-in. |
Conductor cross section AWG | 14 ... 2 |
Air clearances and creepage distances
Standards/regulations | EN 60664-1 / EN 61643-11 |
Standards/specifications | IEC 61643-11 |
Note | 2011 |
Standards/specifications | EN 61643-11 |
Note | 2012 |
Mounting
Mounting Type | DIN rail: 35 mm |
Accessories
Why Proax for Phoenix Contact 2910346?
Proax is an authorized distributor of Phoenix Contact 2910346 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 1 |
Recommended