Official DistributorSKU
MPN
FLKM 4X14-PA/SC/DIO/S7-1500
Weight
0.109 kg
Series FLKM
FLKM 4X14-PA/SC/DIO/S7-1500 - Front adapter
VARIOFACE front adapter with screw connection, for SIMATIC® S7-1500 digital 35 mm modules, 4x 8 or 2x 8 channels can be connected.
Technical Specifications
Insulation characteristics
| Overvoltage category | II |
| Pollution degree | 2 |
Electrical properties
| Operating voltage (DC) | ≤ 50 V DC |
| Nominal operating mode | 100% operating factor |
| Current (Per path) | ≤ 1 A |
| Current (Total current per byte) | ≤ 3 A (With feed-in from the module side) |
| Current (Total current) | ≤ 12 A (When supplying via the front adapter) |
| Rated surge voltage | 0.5 kV |
Supported controller SIEMENS S7-1500
| Suitable I/O card | 6ES7521-1BH00-0AB0 |
| Suitable I/O card | 6ES7521-1BH50-0AA0 |
| Suitable I/O card | 6ES7521-1BL00-0AB0 |
| Suitable I/O card | 6ES7522-1BH00-0AB0 |
| Suitable I/O card | 6ES7522-1BH01-0AB0 |
| Suitable I/O card | 6ES7522-1BL00-0AB0 |
| Suitable I/O card | 6ES7522-1BL01-0AB0 |
Field level
| Connection Method | IDC/FLK pin strip |
| Number of Connections | 4 |
| Number of Positions | 14 |
| Pitch | 2.54 mm |
| Connection Method | IDC/FLK pin strip |
| Number of Connections | 2 |
| Number of Positions | 14 |
| Pitch | 2.54 mm |
Supply
| Connection Method | Screw connection |
| Stripping length | 10 mm |
| Conductor cross section rigid | 0.25 mm² ... 1.5 mm² (with ferrule) |
| Conductor cross section rigid | 0.5 mm² ... 2.5 mm² (without ferrule) |
| Conductor cross section flexible | 0.25 mm² ... 1.5 mm² (with ferrule) |
| Conductor cross section flexible | 0.5 mm² ... 2.5 mm² (without ferrule) |
| Tightening torque | 0.4 Nm |
Item dimensions
| Width | 29.8 mm |
| Height | 130.4 mm |
| Depth | 46 mm |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -25 °C ... 60 °C |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
Standards and Regulations
| Standards/regulations | IEC 61131-2 |
Notes
| Notes on operation | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
Accessories
2290423 - VARIOFACE interface module, for 8 channels with knife disconnect terminal blocks and test sockets to the peripherals and the system
2295554 - V8 adapter for 8 x PLC-INTERFACE (6.2 mm), controller: PLC system cabling of output cards, connection 1: IDC/FLK pin strip 1x 14-position, connection 2: Plug-in connection (Can be snapped onto 8x PLC-INTERFACE terminals), connection 3: Screw connection 1x 2-position, number of channels: 8, control logic: plusschaltend
2296553 - V8 adapter for 8 x PLC-INTERFACE (6.2 mm), controller: PLC system cabling of input cards, connection 1: IDC/FLK pin strip 1x 14-position, connection 2: Plug-in connection (Can be snapped onto 8x PLC-INTERFACE terminals), connection 3: Screw connection 1x 2-position, number of channels: 8, control logic: plusschaltend
2299660 - V8 adapter for 8 x PLC-INTERFACE (14 mm), controller: PLC system cabling of output cards, connection 1: IDC/FLK pin strip 1x 14-position, connection 2: Plug-in connection (Can be snapped onto 8x PLC-INTERFACE terminals), connection 3: Screw connection 1x 2-position, number of channels: 8, control logic: plusschaltend
2290847 - Round cable set; connection 1: IDC/FLK socket strip (1x 14-position); connection 2: IDC/FLK socket strip (1x 14-position); cable length: 4.5 m- 2290850 - Round cable set; connection 1: IDC/FLK socket strip (1x 14-position); connection 2: IDC/FLK socket strip (1x 14-position); cable length: 5.5 m
2299068 - Assembled shielded round cable; connection 1: IDC/FLK socket strip (1x 14-position); connection 2: IDC/FLK socket strip (1x 14-position) (The braided shield is routed to a separate cable end.); cable length: 0.6 m- Câble rond blindé préconfectionné; raccordement 1 : IDC/FLK connecteur femelle (1x 14-pôles); raccordement 2 : IDC/FLK connecteur femelle (1x 14-pôles) (La tresse de blindage sort d'une extrémité de câble distincte.); longueur de câble: 1,2 m
Why Proax for Phoenix Contact 2907381?
Proax is an authorized distributor of Phoenix Contact 2907381 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
2907382 - VARIOFACE front adapter with Push-in connection, for SIMATIC® S7-1500 digital 35 mm modules, 4x 8 or 2x 8 channels can be connected.
2288464 - Front adapter, for Siemens SIMATIC®- S5-95U and S5-100U I/O card 6ES5 482-8MA13 and S5-100U I/O card 6ES5 422-8MA11, 4 x 8 channels can be connected
2907385 - VARIOFACE front adapter, for SIMATIC® S7-1500 analog 35 mm modules, 4x 2 or 2x 2 channels can be connected (40 or 20-pos. modules).