2902085
Official DistributorSKU
PHX2902085
MPN
UM-FLK14/PTS/MSTB/GF-DI
Weight
0.27 kg
Series UM-FLK
UM-FLK14/PTS/MSTB/GF-DI - Termination board
VARIOFACE interface module, with 14-pos flat-ribbon cable connector with knife disconnection and COMBICON connectors, for mounting on NS 35/7,5 or NS 32
Documents
Technical Specifications
Product properties
| Product family | VARIOFACE |
Insulation characteristics: Air clearances and creepage distances
| Insulation | Functional insulation |
| Overvoltage category | II |
| Pollution degree | 2 |
Electrical properties
| Operating voltage (AC) | ≤ 30 V AC |
| Operating voltage (DC) | ≤ 50 V DC |
| Current (per branch) | ≤ 1 A |
| Current (Voltage supply) | ≤ 3 A |
Air clearances and creepage distances
| Rated Insulation Voltage | 50 V |
| Rated surge voltage | 0.5 kV (1.2/50 μs) |
Connection 1 (control level)
| Connection in acc. with standard | IEC 60603-13 |
| Connection Method | IDC/FLK pin strip |
| Number of Connections | 1 |
| Number of Positions | 14 |
| Insertion/withdrawal cycles | > 50 |
| Pitch | 2.54 mm |
Connection 2 (field level)
| Connection Method | Screw connection |
| Stripping length | 7 mm |
| Number of Connections | 3 |
| Number of Positions | 8 |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross-section rigid (2 conductors with same cross section) | 0.2 mm² ... 1 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² (Ferrule without plastic sleeve) |
| Conductor cross section flexible | 0.25 mm² ... 2.5 mm² (Ferrule with plastic sleeve) |
| Conductor cross section flexible (2 conductors with same cross section) | 0.2 mm² ... 1.5 mm² |
| Conductor cross section flexible (2 conductors with same cross section) | 0.25 mm² ... 1 mm² (Ferrule without plastic sleeve) |
| Conductor cross section flexible (2 conductors with same cross section) | 0.5 mm² ... 1.5 mm² (TWIN ferrule with plastic sleeve) |
| Conductor cross section AWG | 24 ... 12 |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| Pitch | 5.08 mm |
Connection 3 (field level)
| Connection Method | PCB terminal block |
| Type | PCB isolating plugs |
| Number of Connections | 1 |
| Number of Positions | 8 |
| Pitch | 5.08 mm |
Connection 4 (supply)
| Connection Method | Screw connection |
| Stripping length | 7 mm |
| Number of Connections | 1 |
| Number of Positions | 2 |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross-section rigid (2 conductors with same cross section) | 0.2 mm² ... 1 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² (Ferrule without plastic sleeve) |
| Conductor cross section flexible | 0.25 mm² ... 2.5 mm² (Ferrule with plastic sleeve) |
| Conductor cross section flexible (2 conductors with same cross section) | 0.2 mm² ... 1.5 mm² |
| Conductor cross section flexible (2 conductors with same cross section) | 0.25 mm² ... 1 mm² (Ferrule without plastic sleeve) |
| Conductor cross section flexible (2 conductors with same cross section) | 0.5 mm² ... 1.5 mm² (TWIN ferrule with plastic sleeve) |
| Conductor cross section AWG | 24 ... 12 |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| Pitch | 5.08 mm |
Connection 5 (supply)
| Connection Method | PCB terminal block |
| Type | PCB isolating plugs |
| Number of Connections | 1 |
| Number of Positions | 2 |
Item dimensions
| Width | 60 mm |
| Height | 128 mm |
| Depth | 66 mm |
Ambient conditions
| Degree of protection (Module) | IP00 |
| Degree of protection (Installation location) | ≥ IP54 |
| Ambient Temperature (Operation) | -20 °C ... 50 °C |
| Ambient temperature (storage/transport) | -20 °C ... 70 °C |
| Altitude | ≤ 2000 m |
Air clearances and creepage distances
| Standards/regulations | EN IEC 60664-1 |
Mounting
| Mounting Type | DIN rail mounting |
| Mounting Position | any |
Notes
| Notes on operation | For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. |
Why Proax for Phoenix Contact 2902085?
Proax is an authorized distributor of Phoenix Contact 2902085 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
UM-FLK14/PTS/MSTB/3723-DI - Digital VARIOFACE input module, with COMBICON screw connection and a 14-pos. flat-ribbon cable connector. The signal path can be interrupted with a knife disconnection.
UM-FLK14/SI/LA/PTS/8IM/PLC - VARIOFACE module, for 8 channels with additional plus and minus terminal blocks. Each channel is secured with a fuse (5 x 20 mm) and comes with a fuse failure indicator. The signal path can be interrupted with a disconnect knife.
UM-FLK10/PI/FU/ROC800 - VARIOFACE module intended for use with the ROC800 controller PI cards. UL recognized to Class I, Div. 2.
UM-FLK10/DI/FU/ROC800 - VARIOFACE module intended for use with the ROC800 controller digital input cards. UL recognized to Class I, Div. 2.
UM-FLK10/AO/FU/ROC800 - VARIOFACE module intended for use with the ROC800 controller analog output cards. UL recognized to Class I, Div. 2.
UM-FLK10/AI/FU/ROC800 - VARIOFACE module intended for use with the ROC800 controller analog input cards. UL recognized to Class I, Div. 2.
UM-FLK10-5RSC-24DC/DO/ROC800 - VARIOFACE module intended for use with the Emerson ROC800-series digital output modules. UL recognized to Class I, Div. 2.