Official Distributor
SKU
MPN
VAL-MS 600DC-PV-ST
Weight
0.065 kg
Series VAL-MS
VAL-MS 600DC-PV-ST - Type 2 surge protection plug
Replacement plug for PV arrester combinations from the VAL-MS 600DC-PV-... product range
Technical Specifications
Product properties
Product family | VALVETRAB MS |
IEC test classification | PV II |
IEC test classification | PV T2 |
EN type | T2 |
IEC power supply system | DC |
Type | Male |
Number of Positions | 1 |
Installation location | Interior |
Installation location of the disconnect device | Internal |
Accessibility | Accessible |
Connection configuration | Y configuration |
SPD failure behavior | OCFM (Open-Circuit Failure Mode) |
Surge protection fault message | optical |
Insulation characteristics
Overvoltage category | III |
Pollution degree | 2 |
Connection data
Connection Method | pluggable |
Dimensions
Width | 17.5 mm |
Height | 52.4 mm |
Depth | 55.3 mm |
Horizontal pitch | 1 Div. |
Material specifications
Color | black (RAL 9005) |
Color | black (RAL 9005) |
Flammability rating according to UL 94 | V-0 |
CTI value of material | 600 |
Insulating material | PA 6.6-FR |
Material group | I |
Housing Material | PA 6.6-FR |
Protective circuit
Standby power consumption PC | ≤ 25.00 mVA |
Nominal discharge current In (8/20) µs | 15 kA |
Maximum discharge current Imax (8/20) µs | 40 kA |
Voltage protection level Up | ≤ 1.4 kV |
Residual voltage Ures | ≤ 1.4 kV (at In) |
Residual voltage Ures | ≤ 1.1 kV (at 5 kA) |
Residual voltage Ures | ≤ 1.3 kV (at 10 kA) |
Residual voltage Ures | ≤ 1.5 kV (at 20 kA) |
Residual voltage Ures | ≤ 1.8 kV (at 30 kA) |
Residual voltage Ures | ≤ 2 kV (at 40 kA) |
Response time tA | ≤ 25 ns |
PV protective circuit
Connection configuration | Y configuration |
SPD failure behavior | OCFM (Open-Circuit Failure Mode) |
Protective circuit DC voltage side (DC)
Open circuit voltage UOCSTC | ≤ 330 V DC |
Maximum discharge current Imax (8/20) µs | 40 kA |
Response time tA | ≤ 25 ns |
Insulation resistance Riso | > 5 GΩ (at 500 V DC) |
Nominal discharge current In (8/20) µs | 15 kA |
Continuous operating current ICPV | 20 µA |
Maximum continuous operating voltage UCPV | 400 V DC |
Short-circuit current rating ISCPV | 2000 A |
Residual voltage Ures | ≤ 1.4 kV (at In) |
Residual voltage Ures | ≤ 1.1 kV (at 5 kA) |
Residual voltage Ures | ≤ 1.3 kV (at 10 kA) |
Residual voltage Ures | ≤ 1.5 kV (at 20 kA) |
Residual voltage Ures | ≤ 1.8 kV (at 30 kA) |
Residual voltage Ures | ≤ 2 kV (at 40 kA) |
Voltage protection level Up | ≤ 1.4 kV |
Standby power consumption PC | ≤ 25.00 mVA |
Ambient conditions
Degree of Protection | IP20 |
Ambient Temperature (Operation) | -40 °C ... 80 °C |
Ambient temperature (storage/transport) | -40 °C ... 80 °C |
Altitude | ≤ 2000 m (amsl) |
Permissible humidity (operation) | 5 % ... 95 % |
Shock (operation) | 60g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) |
Vibration (Operation) | 7.5g (5-500 Hz/2.5 h/XYZ) |
UL specifications
Maximum continuous operating voltage MCOV | 800 V DC |
Short-circuit current rating (SCCR) | 50 kA |
Voltage protection rating VPR | 2 kV |
Nominal discharge current In | 20 kA |
Mode of protection | (L+) - (L-) |
Mode of protection | (L+) - G |
Mode of protection | (L-) - G |
Nominal Voltage | 800 V DC |
Power distribution system | DC PV |
SPD Type | 1CA |
Standards and Regulations
Standards/specifications | EN 61643-31 |
Note | 2019 |
Standards/specifications | IEC 61643-31 |
Note | 2018 |
Mounting
Mounting Type | on base element |
Why Proax for Phoenix Contact 2800623?
Proax is an authorized distributor of Phoenix Contact 2800623 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 1 |
Recommended