Proax
Currency
0 Items
Products
Manufacturers
Expertise
About UsBlogQuick OrderContact UsClearance
proax logo
Cart
Phoenix Contact 1437643
AllConnectorsData connectors
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
SACCBP-MSB-5CON-PG9/0,5-900SCO
Weight
0.061 kg
Series SACCBP-MSB

SACCBP-MSB-5CON-PG9/0,5-900SCO - Device connector rear mounting

Device connector rear mounting, INTERBUS (16 Mbps), 5-position, PUR halogen-free, green RAL 6017, shielded, Pin, straight, M12-SPEEDCON, coding: B, on free cable end, Rear mounting, Pg9, Cable connection, cable length: 0.5 m, INTERBUS, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239670

  • Preassembled with cables in various standard lengths for immediate use
  • Customer-specific assemblies and cable lengths can be supplied
  • Sealed on the cable side for optimum tightness of seal
  • Cable designs for all common networks and fieldbuses
  • For high transmission safety: shield connection to the housing with optional EMC nut
Technical Specifications

Notes

Notes on operationThe electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Order information:Lock nut is included in the scope of delivery

Safety note

Safety noteWARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Safety note• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
Safety note• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
Safety note• The products are suitable for applications in plant, controller, and electrical device engineering.
Safety note• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
Safety note• Assembled products may not be manipulated or improperly opened.
Safety note• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
Safety note• When using the product in direct connection with third-party manufacturers, the user is responsible.
Safety note• For operating voltages > 50 V AC, conductive connector housings must be grounded
Safety note• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
Safety note• Observe the corresponding technical data. You will find information:o On the producto On the packing labelo In the supplied documentationo Online at phoenixcontact.com/products under the product
Safety note• Only use tools recommended by Phoenix Contact
Safety note• Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
Safety note• Ensure that the protective or functional ground has been properly connected.
Safety note• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
Safety note• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).

Mounting

Mounting TypeRear mounting Pg9 With flat nut
Assembly instructionsWith flat nut

Product properties

ApplicationData
Sensor TypeINTERBUS
Number of Positions5
No. of cable outlets1
Shieldedyes
CodingB
Thread typeM12

Insulation characteristics

Overvoltage categoryII
Degree of pollution3

Material specifications

Flammability rating according to UL 94V0
Seal materialFKM
Outer sheath, materialPUR

Electrical properties

Rated surge voltage1.5 kV
Insulation resistance100 MΩ
Nominal voltage UN48 V AC
Nominal voltage UN60 V DC
Nominal current IN4 A
Transmission mediumCopper

Conductor connection

Connection MethodCable connection
Contact connection typePin
Tightening torque2 Nm ... 3 Nm (Installation-side)

Mechanical data

Insertion/withdrawal cycles> 100

Connection 1

Head designPin
Head cable outletstraight
Head thread typeM12
Head locking typeSPEEDCON
CodingB

Connection 2

Head designfree cable end

Cable/line

Cable Length0.5 m

INTERBUS [900]

Cable weight70 kg/km
Number of Positions6
Shieldedyes
Cable TypeINTERBUS [900]
Conductor structure3 x 2 x 0.22 mm²
Signal speed0.66 c
Conductor structure signal line32x 0.10 mm
AWG Signal Line24
Conductor Cross Section3x 2x 0.22 mm²
External Cable Diameter8.00 mm
Outer sheath, materialPUR
External sheath, colormay green RAL 6017
Conductor materialBare Cu litz wires
Material wire insulationPE
Single wire, colorgreen-yellow, white-brown, gray-pink
Twisted pairs2 cores to the pair
Overall twist3 pairs to the core
Insulation resistance≥ 5 GΩ*km
Coupling resistance< 250.00 mΩ/m (at 30 MHz)
Loop resistance≤ 159.80 Ω/km
Wave impedance120 Ω ±20 % (at 64 kHz)
Wave impedance100 Ω ±15 % (with 1 MHz)
Cable capacity≤ 60 nF/km (At 800 Hz)
Nominal voltage, cable250 V (Peak value, not for high-power applications)
Test voltage Core/Core1500 Vrms
Test voltage Core/Shield1000.00 Vrms
Minimum bending radius, fixed installation7.5 x D
Minimum bending radius, flexible installation15 x D
Smallest bending radius, fixed installation60 mm
Smallest bending radius, movable installation120 mm
Max. bending cycles5000000
Near end crosstalk attenuation (NEXT)≥ 61 dB (at 772 kHz)
Near end crosstalk attenuation (NEXT)≥ 59 dB (with 1 MHz)
Near end crosstalk attenuation (NEXT)≥ 55 dB (at 2 МHz)
Near end crosstalk attenuation (NEXT)≥ 50 dB (at 4 МHz)
Near end crosstalk attenuation (NEXT)≥ 46 dB (at 8 МHz)
Near end crosstalk attenuation (NEXT)≥ 44 dB (at 10 MHz)
Near end crosstalk attenuation (NEXT)≥ 41 dB (at 16 MHz)
Near end crosstalk attenuation (NEXT)≥ 40 dB (at 20 МHz)
Shield attenuation≤ 15 dB/km (at 256 kHz)
Shield attenuation≤ 24 dB/km (at 772 kHz)
Shield attenuation≤ 27 dB/km (with 1 MHz)
Shield attenuation≤ 52 dB/km (at 4 МHz)
Shield attenuation≤ 84 dB/km (at 10 MHz)
Shield attenuation≤ 112 dB/km (at 16 MHz)
Shield attenuation≤ 119 dB/km (at 20 МHz)
Flame resistanceaccording to VDE 0472, Part 4, test type B
Flame resistanceaccording to IEC 60332-1
Ambient Temperature (Operation)-40 °C ... 80 °C (cable, fixed installation)
Ambient Temperature (Operation)-30 °C ... 70 °C (Cable, flexible installation)

Ambient conditions

Degree of ProtectionIP67 (When plugged in)
Degree of ProtectionIP65 (When plugged in)
Degree of ProtectionIP65/IP67
Ambient Temperature (Operation)-25 °C ... 85 °C (Plug / socket)
Ambient Temperature (Operation)-40 °C ... 85 °C (without mechanical actuation)

M12

Standard designationM12 connector
Standards/specificationsIEC 61076-2-101
Accessories
  • Phoenix Contact1440177
    1440177
    SACC-PG9-KD-NUT-SH - EMC nut, Threads, Pg9, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239704

Why Proax for Phoenix Contact 1437643?

Proax is an authorized distributor of Phoenix Contact 1437643 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Pack Size1
Recommended
  • Phoenix Contact1437669
    1437669
    SACCBP-MSB-5CON-PG9/2,0-900SCO - Device connector rear mounting, INTERBUS (16 Mbps), 5-position, PUR halogen-free, green RAL 6017, shielded, Pin, straight, M12-SPEEDCON, coding: B, on free cable end, Rear mounting, Pg9, Cable connection, cable length: 2 m, INTERBUS, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239672
  • Phoenix Contact1437672
    1437672
    SACCBP-MSB-5CON-PG9/5,0-900SCO - Bus system flush-type male connector, INTERBUS, 5-pos., M12, shielded, B-coded, SPEEDCON, rear/screw mounting with Pg9 thread, with 5.0 m bus line
  • Phoenix Contact1437494
    1437494
    SACCBP-MSB-2CON-PG9/1,0-910SCO - Device connector rear mounting, PROFIBUS, 2-position, PUR halogen-free, red lilac RAL 4001, shielded, Pin, straight, M12-SPEEDCON, coding: B, on free cable end, Rear mounting, Cable connection, cable length: 1 m, PROFIBUS, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239655
  • Phoenix Contact1437504
    1437504
    SACCBP-MSB-2CON-PG9/2,0-910SCO - Device connector rear mounting, PROFIBUS, 2-position, PUR halogen-free, red lilac RAL 4001, shielded, Pin, straight, M12-SPEEDCON, coding: B, on free cable end, Rear mounting, Cable connection, cable length: 2 m, PROFIBUS, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239656
  • Phoenix Contact1437818
    1437818
    SACCBP-MSD-4CON-PG9/1,0-933SCO - Device connector rear mounting, PROFINET CAT5 (IEC 11801:2002) (100 Mbps), EtherCAT® CAT5 (100 Mbps), 4-position, PVC, green RAL 6018, shielded, Pin, straight, M12-SPEEDCON, coding: D, on free cable end, Rear mounting, Cable connection, cable length: 1 m, PROFINET PVC stranded CAT5, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239685
  • Phoenix Contact1437821
    1437821
    SACCBP-MSD-4CON-PG9/2,0-933SCO - Bus system flush-type plug, PROFINET, 4-pos., M12, shielded, D-coded, SPEEDCON, rear/screw mounting with Pg9 thread, with 2.0 m bus cable, 2 x 2 x 0.34 mm2
  • Phoenix Contact1442308
    1442308
    SACCBP-MS-17CON-M16/1,0-PVCSCO - Device connector rear mounting, Universal, 17-position, PVC/PVC, black RAL 9005, shielded, Pin, straight, M12-SPEEDCON, coding: A, on free cable end, Rear mounting, M16 x 1.5, Cable connection, cable length: 1 m, 0.14 mm2, PVC black, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239771
  • Phoenix Contact1442311
    1442311
    SACCBP-MS-17CON-M16/2,0-PVCSCO - Device connector rear mounting, Universal, 17-position, PVC/PVC, black RAL 9005, shielded, Pin, straight, M12-SPEEDCON, coding: A, on free cable end, Rear mounting, M16 x 1.5, Cable connection, cable length: 2 m, 0.14 mm2, PVC black, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239772
  • Phoenix Contact1442227
    1442227
    SACCBP-MS-12CON-M16/1,0-PVCSCO - Device connector rear mounting, Universal, 12-position, PVC/PVC, black RAL 9005, shielded, Pin, straight, M12-SPEEDCON, coding: A, on free cable end, Rear mounting, M16 x 1.5, Cable connection, cable length: 1 m, 0.14 mm2, PVC black, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239767
  • Phoenix Contact1442230
    1442230
    SACCBP-MS-12CON-M16/2,0-PVCSCO - Device connector rear mounting, Universal, 12-position, PVC/PVC, black RAL 9005, shielded, Pin, straight, M12-SPEEDCON, coding: A, on free cable end, Rear mounting, M16 x 1.5, Cable connection, cable length: 2 m, 0.14 mm2, PVC black, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239768
  • Phoenix Contact1419399
    1419399
    SACCBP-MS-4CON-M16/1,0-PUR SCO - Device connector rear mounting, Universal, 4-position, PUR, black-gray RAL 7021, shielded, Pin, straight, M12-SPEEDCON, coding: A, on free cable end, Rear mounting, M16 x 1.5, Cable connection, cable length: 1 m, PUR halogen-free black, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239252
  • Phoenix Contact1419386
    1419386
    SACCBP-MS-4CON-M16/2,0-PUR SCO - Device connector rear mounting, Universal, 4-position, PUR, black-gray RAL 7021, shielded, Pin, straight, M12-SPEEDCON, coding: A, on free cable end, Rear mounting, M16 x 1.5, Cable connection, cable length: 2 m, PUR halogen-free black, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239251
  • Phoenix Contact1437562
    1437562
    SACCBP-MS-5CON-PG9/0,5-920SCO - Device connector rear mounting, CANopen®, DeviceNet™, 5-position, PUR halogen-free, red lilac RAL 4001, shielded, Pin, straight, M12-SPEEDCON, coding: A, on free cable end, Rear mounting, Cable connection, cable length: 0.5 m, CANopen®/DeviceNet™, PUR, violet, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239662
  • Phoenix Contact1437575
    1437575
    SACCBP-MS-5CON-PG9/1,0-920SCO - Device connector rear mounting, CANopen®, DeviceNet™, 5-position, PUR halogen-free, red lilac RAL 4001, shielded, Pin, straight, M12-SPEEDCON, coding: A, on free cable end, Rear mounting, Cable connection, cable length: 1 m, CANopen®/DeviceNet™, PUR, violet, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239663
  • Phoenix Contact1437588
    1437588
    SACCBP-MS-5CON-PG9/2,0-920SCO - Device connector rear mounting, CANopen®, DeviceNet™, 5-position, PUR halogen-free, red lilac RAL 4001, shielded, Pin, straight, M12-SPEEDCON, coding: A, on free cable end, Rear mounting, Cable connection, cable length: 2 m, CANopen®/DeviceNet™, PUR, violet, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239664
  • Phoenix Contact1419409
    1419409
    SACCBP-MS-5CON-M16/1,0-PUR SCO - Device connector rear mounting, Universal, 5-position, PUR halogen-free, black-gray RAL 7021, shielded, Pin, straight, M12-SPEEDCON, coding: A, on free cable end, Rear mounting, M16 x 1.5, Cable connection, cable length: 1 m, PUR halogen-free black, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239254
  • Phoenix Contact1419412
    1419412
    SACCBP-MS-5CON-M16/2,0-PUR SCO - Device connector rear mounting, Universal, 5-position, PUR halogen-free, black-gray RAL 7021, shielded, Pin, straight, M12-SPEEDCON, coding: A, on free cable end, Rear mounting, M16 x 1.5, Cable connection, cable length: 2 m, PUR halogen-free black, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239255
  • Phoenix Contact1419425
    1419425
    SACCBP-MS-8CON-M16/1,0-PUR SCO - Device connector rear mounting, Universal, 8-position, PUR halogen-free, black-gray RAL 7021, shielded, Pin, straight, M12-SPEEDCON, coding: A, on free cable end, Rear mounting, M16 x 1.5, Cable connection, cable length: 1 m, 0.25 mm2, PUR halogen-free black, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239256
  • Phoenix Contact1419438
    1419438
    SACCBP-MS-8CON-M16/2,0-PUR SCO - Device connector rear mounting, Universal, 8-position, PUR halogen-free, black-gray RAL 7021, shielded, Pin, straight, M12-SPEEDCON, coding: A, on free cable end, Rear mounting, M16 x 1.5, Cable connection, cable length: 2 m, 0.25 mm2, PUR halogen-free black, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239257
  • Phoenix Contact1437601
    1437601
    SACCBP-FSB-5CON-PG9/0,5-900SCO - Bus system flush-type female connector, INTERBUS, 5-pos., M12, shielded, B-coded, SPEEDCON, rear/screw mounting with Pg9 thread, with 0.5 m bus line

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability