The figure shows the version VAL-MS 320/3+0/FM
Official DistributorSKU
MPN
VAL-MS 320/3+0
Weight
0.392 kg
Series VAL-MS
VAL-MS 320/3+0 - Type 2 surge protection device
Surge protective device, 3-channel (in 3+0 circuit), for installation on NS 35/7,5 voltage: 230 V AC
Technical Specifications
Product properties
| IEC test classification | II |
| EN type | T2 |
| IEC power supply system | TN-C |
| Type | DIN rail module, two-section, divisible |
| Number of Positions | 3 |
| Surge protection fault message | optical |
Insulation characteristics
| Overvoltage category | III |
| Pollution degree | 2 |
Electrical properties
| Nominal frequency fN | 50 Hz |
| Nominal frequency fN | 60 Hz |
| Nominal voltage UN | 230 V AC (up to 400 V AC) |
| Nominal voltage UN | 240 V AC (up to 415 V AC) |
| Nominal voltage UN | 230 V AC ... 415 V AC |
Indicator/remote signaling
| Max. operating current Imax | 1 A AC (inductive) |
| Max. operating current Imax | 1 A AC (ohmic) |
| Max. operating current Imax | 30 mA DC (inductive) |
| Max. operating current Imax | 200 mA DC (ohmic) |
Connection data
| Connection Method | Screw connection |
| Screw thread | M5 |
| Tightening torque, min | 4.5 Nm |
| Stripping length | 14.5 mm |
| Conductor cross section flexible min. | 0.5 mm² |
| Conductor cross section flexible max. | 25 mm² |
| Conductor cross section, rigid min. | 0.5 mm² |
| Conductor cross section, rigid max. | 35 mm² |
Dimensions
| Width | 53.1 mm |
| Height | 94 mm |
| Depth | 65.5 mm |
| Horizontal pitch | 3 Div. |
Material specifications
| Flammability rating according to UL 94 | V0 |
| Housing Material | PBT/PA |
Mechanical data
| Open side panel | No |
Protective circuit
| Direction of action | 3L-N/PE |
| Nominal voltage UN | 230 V AC ... 415 V AC |
| Nominal frequency fN | 50 Hz |
| Nominal frequency fN | 60 Hz |
| Residual current IPE | ≤ 0.3 mA |
| Nominal discharge current In (8/20) µs (L-PE) | 20 kA |
| Nominal discharge current In (8/20) µs (L-PEN) | 60 kA (all channels) |
| Maximum discharge current Imax (8/20) µs (L-PE) | 40 kA |
| Maximum discharge current Imax (8/20) µs (L-PEN) | 120 kA (all channels) |
| Voltage protection level Up (L-N) | ≤ 1.6 kV |
| Voltage protection level Up (L-PE) | ≤ 1.75 kV |
| Voltage protection level Up (L-PEN) | ≤ 1.5 kV |
| Response time tA (L-PE) | ≤ 25 ns |
| Max. backup fuse with branch wiring | 125 A (gL) |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -25 °C ... 65 °C |
Air clearances and creepage distances
| Standards/regulations | DIN VDE 0110-1 / VDE 0675-6 |
Standards
| Standards/regulations | IEC 61643-1 |
| Standards/regulations | DIN EN 61643-11/A11 |
| Standards/regulations | E DIN VDE 0675-6/A1 |
| Standards/regulations | UL 1449 |
| Standards/specifications | IEC 61643-1 |
| Note | 2005 |
| Standards/specifications | DIN EN 61643-11 |
| Note | 2002 |
| Standards/specifications | DIN EN 61643-11/A11 |
| Note | 2007 |
Mounting
| Mounting Type | DIN rail: 35 mm |
Why Proax for Phoenix Contact 2859042?
Proax is an authorized distributor of Phoenix Contact 2859042 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
2920230 - Surge arrester for 4-conductor power supply systems (L1, L2, L3, PEN), consisting of a base element and protective connectors, for mounting on NS 35.
2859178 - Surge protective device, 4-channel (in 3+1 circuit), for installation on NS 35/7,5 voltage: 230 V AC
2859055 - Surge protective device combination, 3-channel, for installation on NS 35/7,5, with remote indication contact (FM) as changeover contact, voltage 230 V AC
2920243 - Surge arrester for 4-conductor power supply systems (L1, L2, L3, PEN), consisting of a base element with remote indication contact and protective connectors, for mounting on NS 35.
2859181 - Surge protective device combination, 4-channel, for installation on NS 35/7,5, with remote indication contact (FM) as changeover contact, voltage 230 V AC
2856689 - Surge voltage arrester consisting of base element with remote indicator contact and ground connectors, for mounting on NS 35/7.5, nominal voltage: 320 V AC, 3 + 1 circuit
2804380 - Surge arrester for 3-conductor power supply systems (L1, N, PE), consisting of a base element and protective connectors, for mounting on NS 35.- 2800492 - Surge arrester for 3-conductor power supply systems (L1, N, PE), consisting of a base element and protective connectors, for mounting on NS 35.
2804393 - Surge arrester for 3-conductor power supply systems (L1, N, PE), consisting of a base element with remote indication contact and protective connectors, for mounting on NS 35.
2858315 - Surge protection connector type 2 with high-capacity varistor for VAL-MS base element, thermal monitoring, visual fault warning. Design: 320 V AC
2838843 - Surge protection connector type 2 with high-capacity varistor for VAL-MS base element, thermal monitoring, visual fault warning. Design: 320 V AC
2803551 - Surge arrester for 5-conductor power supply systems (L1, L2, L3, N, PE), consisting of a base element with remote indication contact and protective connectors, for mounting on NS 35.
2803535 - Surge arrester for 4-conductor power supply systems (L1, L2, L3, PEN), consisting of a base element with remote indication contact and protective connectors, for mounting on NS 35.
2803616 - Surge arrester for 3-conductor power supply systems (L1, N, PE), consisting of a base element and protective connectors, for mounting on NS 35.
2803629 - Surge arrester for 3-conductor power supply systems (L1, N, PE), consisting of a base element with remote indication contact and protective connectors, for mounting on NS 35.
2803593 - Surge arrester for 5-conductor power supply systems (L1, L2, L3, N, PE), consisting of a base element and protective connectors, for mounting on NS 35.
2803577 - Surge arrester for 4-conductor power supply systems (L1, L2, L3, PEN), consisting of a base element and protective connectors, for mounting on NS 35.
