The figure shows the PT 2-PE/S-230AC/FM version
2856812
Official DistributorSKU
PHX2856812
MPN
PT 2-PE/S-120AC/FM
Weight
0.081 kg
Series PT
PT 2-PE/S-120AC/FM - Type 3 surge protection device
Pluggable type 3 arrester (device protection) for single-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE) with remote indication contact.
PT
The Phoenix Contact PT Series comprises feed-through terminal blocks that utilize Push-in connection technology, offering efficient and reliable wiring solutions for various industrial applications. These terminal blocks are designed for straightforward conductor insertion, enhancing installation speed and ensuring secure connections.
- Push-in Connection Technology: The PT Series employs a direct plug-in method, allowing solid conductors or conductors with ferrules to be inserted easily without the need for tools. This design facilitates quick and reliable wiring.
- Compact Design: The terminal blocks feature a space-saving form factor, making them suitable for applications where installation space is limited.
- High Electrical Ratings: Depending on the specific model, the PT Series terminal blocks can handle nominal voltages up to 800 V and nominal currents up to 32 A, accommodating a wide range of electrical requirements.
- Versatile Conductor Compatibility: These terminal blocks support various conductor types and sizes, providing flexibility in wiring configurations.
- Integration with CLIPLINE Complete System: The PT Series is compatible with Phoenix Contact's CLIPLINE complete system, allowing for standardized bridging, marking, and testing accessories, which simplifies inventory management and enhances system modularity.
Technical Specifications
Product properties
| Type | DIN rail module, two-section, divisible |
| Surge protection fault message | Optical, remote indicator contact |
Insulation characteristics
| Overvoltage category | III |
| Pollution degree | 2 |
| Arrester can be tested with CHECKMASTER from software version: | From SW rev. 1.00 |
| IEC test classification | III |
| EN type | T3 |
Indicator/remote signaling
| Connection name | Remote fault indicator contact |
| Switching function | N/C contact |
| Maximum operating voltage Umax. AC | 250 V |
| Maximum operating voltage Umax DC | 50 V |
| Max. operating current Imax | 3 A AC |
Connection data
| Connection Method | Screw connection |
| Screw thread | M3 |
| Tightening torque, min | 0.8 Nm |
| Conductor cross section flexible min. | 0.2 mm² |
| Conductor cross section flexible max. | 2.5 mm² |
| Conductor cross section, rigid min. | 0.2 mm² |
| Conductor cross section, rigid max. | 4 mm² |
Dimensions
| Width | 17.7 mm |
| Height | 90 mm |
| Depth | 65.5 mm |
| Horizontal pitch | 1 Div. |
| Complete module width | 17.7 mm |
| Complete module height | 90 mm |
| Complete module depth | 65.5 mm |
Material specifications
| Flammability rating according to UL 94 | V0 |
| Housing Material | PA |
Protective circuit
| Direction of action | 1L-N & N-PE |
| Nominal frequency fN | 50 Hz |
| Nominal frequency fN | 60 Hz |
| Maximum continuous voltage UC | 150 V AC |
| Rated load current IL | 26 A (30 °C) |
| Residual current IPE | ≤ 1.5 µA |
| Standby power consumption PC | ≤ 200.00 mVA |
| Operating effective current IC at UC | ≤ 1.1 mA |
| Nominal discharge current In (8/20) µs | 2.5 kA |
| Nominal discharge current In (8/20) µs | 3 kA (in acc. with UL 1449) |
| Voltage protection level Up (L-N) | ≤ 620 V |
| Voltage protection level Up (L-PE) | ≤ 850 V |
| Voltage protection level Up (N-PE) | ≤ 850 V |
| Response time tA (L-N) | ≤ 25 ns |
| Response time tA (L-PE) | ≤ 100 ns |
| Max. required back-up fuse | 25 A (gL/C) |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -40 °C ... 85 °C |
Air clearances and creepage distances
| Standards/regulations | DIN VDE 0110-1 / IEC 60664-1 / DIN VDE 0675-6 / IEC 61643-1 |
Standards
| Standards/regulations | IEC 61643-1 |
| Standards/regulations | EN 61643-11/A11 |
| Standards/regulations | NF C61-740 |
| Standards/regulations | IEC 61643-1 |
| Standards/regulations | EN 61643-11/A11 |
| Standards/regulations | UL 1449 |
| Standards/regulations | NF C61-740 |
| Standards/specifications | IEC 61643-1 |
| Note | 2005 |
| Standards/specifications | EN 61643-11/A11 |
| Note | 2007 |
| Standards/specifications | UL 1449 |
| Standards/specifications | NF C61-740 |
Mounting
| Mounting Type | DIN rail: 35 mm |
Why Proax for Phoenix Contact 2856812?
Proax is an authorized distributor of Phoenix Contact 2856812 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
PT 2-PE/S-120AC-ST - Protective plug PT with surge voltage equipment protection for power supply units, visual error display. Nominal voltage: 120 V AC
Pluggable type 3 arrester (device protection) for single-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE) with remote indication contact.- PT 2-PE/S-24AC/FM - Pluggable type 3 arrester (device protection) for single-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE) with remote indication contact.
- PT 2-PE/S- 24AC-ST - Protective plug PT with surge voltage equipment protection for power supply units, visual error warning. Nominal voltage: 24 V AC
- PT 2-PE/S- 60AC-ST - Protective plug PT with surge voltage equipment protection for power supply units, visual error display. Nominal voltage: 60 V AC
