2856702
Official DistributorSKU
PHX2856702
MPN
SFP 1-20/120AC
Weight
0.615 kg
Series SFP
SFP 1-20/120AC - EMC filter surge protection device
Device protection, according to type 3/class III, with mains interference filter to prevent high-frequency interference voltages, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with remote indication contact.
- Optimized protective effect with combined protective circuit for absorbing transient overvoltages for attenuating high-frequency interference
- Symmetrical design of the protective circuit with surge protection components on the input and output sides of the filter
- Protection against excessive heating with thermal monitoring of the protective circuit
- Versatile in use with universal circuit design
Technical Specifications
General
| Note | For IT systems: only install the device in 120 V IT systems with common HV/LV grounding system. |
Product properties
| Product family | SFP |
| Type | DIN rail module, one-piece |
| Number of Positions | 2 |
| For country-specific use in | USA, CN, BR |
| Surge protection fault message | Optical, remote indicator contact |
Insulation characteristics
| Overvoltage category | III |
| Pollution degree | 2 |
| IEC test classification | III |
| IEC test classification | T3 |
| EN type | T3 |
| Number of Ports | Two |
Indicator/remote signaling
| Connection name | Remote fault indicator contact |
| Switching function | Changeover contact |
| Operating Voltage | 12 V AC ... 250 V AC |
| Operating Voltage | 250 V DC (250 mA DC) |
| Operating current | 100 mA AC ... 1 A AC |
| Operating current | 1 A DC (48 V DC) |
Connection data
| Connection Method | Screw terminal blocks |
| Screw thread | M3 |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| Tightening torque | 4.5 lbf-in. ... 5.5 lbf-in. |
| Conductor cross section flexible | 2.5 mm² ... 4 mm² |
| Conductor cross section rigid | 2.5 mm² ... 6 mm² |
| Conductor cross section AWG | 14 ... 10 |
Dimensions
| Width | 112 mm |
| Height | 86.6 mm |
| Depth | 79 mm |
Material specifications
| Color | black (RAL 9005) |
| Color | Silver |
| Flammability rating according to UL 94 | V-0 |
| Insulating material | ABS |
| Housing Material | Aluminum |
Mechanical data
| Open side panel | No |
Protective circuit
| Mode of protection | L-N |
| Mode of protection | L-PE |
| Mode of protection | N-PE |
| Direction of action | L-N & L(N)-PE |
| Nominal voltage UN | 120 V AC (TN) |
| Nominal voltage UN | 120 V AC (TT - only in use with RCD) |
| Nominal voltage UN | 120 V AC (IT) |
| Nominal frequency fN | 50 Hz (60 Hz) |
| Maximum continuous voltage UC | 150 V AC |
| Rated load current IL | 20 A (40 °C) |
| Residual current IPE | ≤ 0.6 mA |
| Standby power consumption PC | ≤ 7.50 VA (at UREF) |
| Standby power consumption PC | ≤ 10.00 VA (at UC) |
| Reference test voltage UREF | 132.00 V AC |
| Nominal discharge current In (8/20) µs | 3 kA |
| Combination wave UOC | 6 kV (3 kA) |
| Voltage protection level Up | ≤ 0.45 kV |
| TOV behavior at UT (L-N) | 175 V AC (5 s / withstand mode) |
| TOV behavior at UT (L-N) | 240 V AC (5 s / safe failure mode) |
| TOV behavior at UT (L-N) | 208 V AC (120 min / safe failure mode) |
| TOV behavior at UT (L-PE) | 208 V AC (5 s / withstand mode) |
| TOV behavior at UT (L-PE) | 175 V AC (120 min / withstand mode) |
| TOV behavior at UT (L-PE) | 1332 V AC (200 ms / safe failure mode) |
| TOV behavior at UT (N-PE) | 1200 V AC (200 ms / safe failure mode) |
| Response time tA | ≤ 25 ns |
| Capacity (L-N) | 1 µF ±10 % |
| Capacity (L-N) | 10 nF ±10 % (X2-275 V) |
| Capacity (L-PE) | 2.2 nF ±20 % (Y2-250 V) |
| Capacity (N-PE) | 2.2 nF ±20 % (Y2-250 V) |
| Max. required back-up fuse | 20 A (MCB B/general purpose) |
| Max. required back-up fuse | 16 A (IT - MCB B/general purpose) |
| Input attenuation aE, sym. | 20 dB (≥ 100 kHz / 50 Ω) |
| Input attenuation aE, asym. | 30 dB (≥ 1 MHz / 50 Ω) |
| Short-circuit current rating ISCCR | 5 kA AC (TN/TT) |
| Short-circuit current rating ISCCR | 1 kA AC (IT) |
Filter data
| Discharge resistance | 820 kΩ |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -25 °C ... 70 °C |
| Ambient temperature (storage/transport) | -25 °C ... 70 °C |
| Permissible humidity (operation) | 5 % ... 95 % |
UL specifications
| Maximum continuous operating voltage MCOV (L-N) | 150 V AC |
| Maximum continuous operating voltage MCOV (L-G) | 150 V AC |
| Maximum continuous operating voltage MCOV (N-G) | 150 V AC |
| Short-circuit current rating (SCCR) | 5 kA |
| Voltage protection rating VPR (L-N) | 500 V |
| Voltage protection rating VPR (L-G) | 500 V |
| Voltage protection rating VPR (N-G) | 500 V |
| Nominal discharge current In | 3 kA |
| Mode of protection | L-N |
| Mode of protection | L-G |
| Mode of protection | N-G |
| Power distribution system | Single phase |
| Nominal frequency | 50/60 Hz |
| SPD Type | 2CA |
UL indicator/remote signaling
| Operating Voltage | 12 V AC ... 250 V AC |
| DC operating voltage | 250 V DC (250 mA DC) |
| AC operating current | 100 mA AC ... 1 A AC |
| DC operating current | 1 A DC (48 V DC) |
UL connection data
| Tightening torque | 5 lbf-in. ... 7 lbf-in. |
| Conductor cross section AWG | 12 ... 10 |
Air clearances and creepage distances
| Standards/regulations | DIN VDE 0110-1 / IEC 60664-1 / IEC 61643-1 |
| Standards/specifications | IEC 61643-11 |
| Note | 2011 |
| Standards/specifications | EN 61643-11 |
| Note | 2012 |
Mounting
| Mounting Type | DIN rail: 35 mm |
Why Proax for Phoenix Contact 2856702?
Proax is an authorized distributor of Phoenix Contact 2856702 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
SFP 1-20/120AC/EX - Device protection, according to type 3/class III, with mains interference filter to prevent high-frequency interference voltages, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with remote indication contact. Can be used in potentially explosive areas in zone 2.
SFP 1-20/230AC - Device protection, according to type 3/class III, with mains interference filter to prevent high-frequency interference voltages, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with remote indication contact.
SFP 1-10/120AC - Device protection, according to type 3/class III, with mains interference filter to prevent high-frequency interference voltages, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with remote indication contact.
SFP 1-15/120AC - Device protection, according to type 3/class III, with mains interference filter to prevent high-frequency interference voltages, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with remote indication contact.
SFP 1-5/120AC - Device protection, according to type 3/class III, with mains interference filter to prevent high-frequency interference voltages, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE), with remote indication contact.