Official DistributorSKU
MPN
IB IL EC AR 48/10A-PAC
Weight
1.048 kg
This product is Not Cancellable/Not Returnable
Series IB-IL-EC-AR
IB IL EC AR 48/10A-PAC - Inline function terminal
Servo amplifier for DC motors with brushgear and EC motors (without brushgear)
- Overall width: 97.6 mm
- Homing
- Position detection with incremental encoder
- Position, speed, and torque control
- Point-to-point positioning function
- Electronic commutation with Hall sensors
- Variable frequency drive with positioning function
- Speed profile: trapezoid or S curve
Technical Specifications
Dimensions
| Width | 97.6 mm |
| Height | 166 mm |
| Depth | 85 mm |
Inline local bus
| Connection Method | Inline data jumper |
| Transmission Speed | 500 kbps |
Startup and diagnostics
| Connection Method | RS-232 |
Module
| ID code (dec.) | 195 |
| ID code (hex) | C3 |
| Length code (hex) | 03 |
| Length code (dec) | 03 |
| Process data channel | 48 bit |
| Input address area | 48 bit |
| Output address area | 48 bit |
| Register length | 64 bit |
| Required parameter data | 8 Byte |
| Required configuration data | 5 Byte |
Digital
| Number of Inputs | 3 |
| Connection Method | MINI COMBICON |
| Connection technology | 3-conductor (signal, Us, GND) |
| Number of Positions | 3 |
| Input Voltage | 24 V DC |
Incremental encoder
| Number of Inputs | 1 |
| Input frequency (5 V) | max. 1 MHz |
| Input frequency (5 V) | max. 500 kHz (At 4 V voltage level) |
| Input frequency (24 V) | max. 100 kHz (At 20 V voltage level) |
Product properties
| Product family | Inline |
| Type | modular |
Potentials: Communications power (UL)
| Supply Voltage | 7.5 V DC (via voltage jumper) |
| Current draw | max. 120 mA |
| Current draw | typ. 30 mA |
Potentials: Main circuit supply (UM)
| Supply Voltage | 24 V DC (via voltage jumper) |
| Supply Voltage Range | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Current draw | max. 150 mA |
| Current draw | typ. 100 mA |
Potentials: Segment circuit supply (US)
| Supply Voltage | 24 V DC (nominal value) |
Supply: Module electronics
| Connection Method | 2-pos. COMBICON connector |
| Designation | Power supply |
| Supply Voltage Range | 12 V DC ... 48 V DC ±15 % (Overvoltage switch-off shutdown US > 60 V DC) |
| Max. current carrying capacity | 10 A |
Electrical isolation/isolation of the voltage ranges
| Test voltage: Logic UL / I/O / motor | 500 V AC |
Connection technology
| Connection name | Front MSTB |
Conductor connection
| Connection Method | Screw connection |
| Conductor cross section rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
| Stripping length | 8 mm |
Front MSTB
| Connection Method | Screw connection |
| Conductor cross section, rigid | 0.2 mm² ... 2.5 mm² |
| Conductor cross section, flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 24 ... 12 |
| Stripping length | 8 mm |
Front MC
| Connection Method | Screw connection |
| Conductor cross section, rigid | 0.14 mm² ... 2.5 mm² |
| Conductor cross section, flexible | 0.2 mm² ... 2.5 mm² |
| Conductor cross section AWG | 28 ... 16 |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -25 °C ... 55 °C |
| Air pressure (operation) | 80 kPa ... 106 kPa (up to 2000 m above sea level) |
| Air pressure (storage/transport) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Ambient temperature (storage/transport) | -25 °C ... 85 °C |
| Permissible humidity (operation) | 75 % ... 85 % (75% permanent, 85% occasionally) |
| Permissible humidity (storage/transport) | 75 % ... 85 % (75% permanent, 85% occasionally) |
Standards and Regulations
| Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
| Noise emission | Noise emission test of the housing EN 55011:1991 class A in accordance with EN 61000-6-4 |
Mounting
| Mounting Type | DIN rail mounting |
Accessories
2819561 - Connector set, including shield clamps for Inline servo amplifier IB IL EC AR 48/10A
2819736 - Cable to connect the Inline servo amplifier IB IL EC AR 48/10A to the RS-232 interface of a PC to use the startup and diagnostics software
Why Proax for Phoenix Contact 2819587?
Proax is an authorized distributor of Phoenix Contact 2819587 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
- 2819561 - Connector set, including shield clamps for Inline servo amplifier IB IL EC AR 48/10A
2897020 - Inline, Digital input terminal, Digital inputs: 8 (S0 counter inputs), 24 V DC, connection technology: 4-conductor, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connectors and marking fields
2897813 - Inline, DALI master, integrated DALI power supply unit, safe electrical isolation, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connectors and marking fields
2897910 - Inline, DALI master, Extension for IB IL DALI/PWR-PAC, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connector and labeling field
2742696 - Inline digital output terminal, without accessories, 4 outputs, 12 to 253 V AC, 1 A, 3-conductor connection technology
2836748 - Inline digital output terminal, without accessories, 1 output, 12 to 253 V AC, 500 mA, 3-conductor connection method
2861920 - Inline, Digital output terminal, Digital outputs: 1, 230 V AC, connection technology: 3-conductor, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connector and labeling field
2869909 - Inline terminal for use as an isolator between non-intrinsically safe inline expansion I/O and intrinsically safe inline power supply.
2700196 - Inline CAN master, for connecting a CAN bus system, complete with accessories (connector and marking field)- 2701160 - Inline function terminal, version for extreme conditions, for connecting a CAN bus system, complete with accessories (connector and labeling field)
