The figure shows version FLT-PLUS CTRL-0,9
2800170
Official DistributorSKU
PHX2800170
MPN
FLT-PLUS CTRL-3.0/I
Weight
0.564 kg
Series FLT-PLUS-CTRL
FLT-PLUS CTRL-3.0/I - Type 1+2 combined lightning current and surge arrester
Type 1 / Class I (lightning current arrester) with arc chopping spark gap and ignition electronics with control lamp, quenching plates for high mains follow-through current quenching capacity, 1-channel. Protection level: 3 kV. Housing width: 35 mm (2 Div.)
Documents
Technical Specifications
Product properties
| IEC test classification | I |
| IEC test classification | T1 |
| EN type | T1 |
| IEC power supply system | TT |
| IEC power supply system | TN-C |
| IEC power supply system | TN-S |
| IEC power supply system | IT |
| Type | DIN rail module, one-piece |
| Number of Positions | 1 |
| Surge protection fault message | optical |
Insulation characteristics
| Overvoltage category | III |
| Pollution degree | 2 |
Electrical properties
| Nominal frequency fN | 50 Hz |
| Nominal frequency fN | 60 Hz |
| Nominal voltage UN | 230 V AC (400 V AC) |
Connection data
| Connection Method | Screw connection |
| Screw thread | M6 |
| Tightening torque, min | 8 Nm |
| Stripping length | 19 mm |
| Conductor cross section flexible min. | 16 mm² |
| Conductor cross section flexible max. | 35 mm² |
| Conductor cross section, rigid min. | 10 mm² |
| Conductor cross section, rigid max. | 50 mm² |
Dimensions
| Width | 35.5 mm |
| Height | 150 mm |
| Depth | 80.5 mm |
| Horizontal pitch | 2 Div. |
Material specifications
| Flammability rating according to UL 94 | V0 |
| Housing Material | PA-GF |
Mechanical data
| Open side panel | No |
Protective circuit
| Direction of action | 1L-N/PE |
| Nominal frequency fN | 50 Hz |
| Nominal frequency fN | 60 Hz |
| Maximum continuous voltage UC | 440 V AC |
| Maximum continuous operating voltage UC (L-N) | 440 V AC |
| Maximum continuous operating voltage UC (L-PEN) | 440 V AC |
| Residual current IPE | ≤ 3 mA |
| Standby power consumption PC | ≤ 1.32 VA |
| Nominal discharge current In (8/20) µs | 50 kA |
| Nominal discharge current In (8/20) µs (L-N) | 50 kA |
| Nominal discharge current In (8/20) µs (L-PEN) | 50 kA |
| Maximum discharge current Imax (8/20) µs | 50 kA |
| Impulse discharge current (10/350) µs, charge | 25 As |
| Impulse discharge current (10/350) µs, specific energy | 625 kJ/Ω |
| Impulse discharge current (10/350) µs, peak value limp | 50 kA |
| Follow current interrupt rating Ifi | 25 kA (440 V AC) |
| Follow current interrupt rating Ifi | 50 kA (350 V AC) |
| Voltage protection level Up | ≤ 3 kV |
| Voltage protection level Up (L-N) | ≤ 3 kV |
| Voltage protection level Up (L-PEN) | ≤ 3 kV |
| Front of wave sparkover voltage at 6 kV (1.2/50) µs | ≤ 3 kV |
| Response time tA | ≤ 100 ns |
| Response time tA (L-N) | ≤ 100 ns |
| Response time tA (L-PEN) | ≤ 100 ns |
| Max. backup fuse with branch wiring | 500 A (NH-gL) |
Ambient conditions
| Degree of Protection | IP20 |
| Ambient Temperature (Operation) | -40 °C ... 85 °C |
| Permissible humidity (operation) | ≤ 95 % |
Air clearances and creepage distances
| Standards/regulations | EN 60664-1 / EN 61643-11 |
Standards
| Standards/regulations | IEC 61643-1 |
| Standards/regulations | DIN EN 61643-11 |
| Standards/regulations | DIN EN 61643-11/A11 |
| Standards/specifications | IEC 61643-1 |
| Note | 2005 |
| Standards/specifications | DIN EN 61643-11 |
| Note | 2002 |
| Standards/specifications | DIN EN 61643-11/A11 |
| Note | 2007 |
Mounting
| Mounting Type | DIN rail: 35 mm |
Why Proax for Phoenix Contact 2800170?
Proax is an authorized distributor of Phoenix Contact 2800170 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
FLT-PLUS CTRL-2.5 - Type 1 / Class I (lightning current arrester) with arc chopping spark gap and ignition electronics, quenching plates for high mains follow-through current quenching capacity, 1-channel. Protection level: 2.5 kV. Housing width: 35 mm (2 Div.)- FLT-PLUS CTRL-2.5 - Type 1 / Class I (lightning current arrester) with arc chopping spark gap and ignition electronics, quenching plates for high mains follow-through current quenching capacity, 1-channel. Protection level: 2.5 kV. Housing width: 35 mm (2 Div.)
- FLT-PLUS CTRL-1.5/I - Type 1 / Class I (lightning current arrester) with arc chopping spark gap and ignition electronics, quenching plates for high mains follow-through current quenching capacity, 1-channel. Protection level: 1.5 kV. Housing width: 35 mm (2 Div.)
- FLT-PLUS CTRL-1.5 - Type 1 / Class I (lightning current arrester) with arc chopping spark gap and ignition electronics, quenching plates for high mains follow-through current quenching capacity, 1-channel. Protection level: 1.5 kV. Housing width: 35 mm (2 Div.)
FLT-PLUS - Type 1/Class I (lightning current arrester) with arc chopping spark gap, quenching plates for high follow current quenching capacity, 1-channel. Housing width: 35 mm (2 Div.)