
SKU
MPN
IBS RL 24 DIO 8/8/8 RS-LK
Weight
3.92 kg
Series IBS-RL
IBS RL 24 DIO 8/8/8 RS-LK - Distributed I/O device
Digital I/O device for INTERBUS; fiber optic technology with 500 kbaud, eight inputs (24 V DC), eight relay outputs (12 V AC to 250 V AC; 2 A, maximum), sensor connection via 5-pos. M12 female connectors, rugged metal housing, IP67 protection
- COMBICON connector for relay outputs
- M12 connector for digital inputs
- Rugged Line connector for INTERBUS with fiber optic and supply voltage
- Comprehensive diagnostic functions
- Rugged metal housing
Technical Specifications
Product properties
Type | Block design |
No. of channels | 16 |
Module
ID code (dec.) | 3 |
ID code (hex) | 03 |
Length code (hex) | 09 |
Length code (dec) | 9 |
Process data channel | 8 bit |
Input address area | 1 Byte |
Output address area | 1 Byte |
Register length | 1 Byte |
Supply: Module electronics
Supply Voltage | 24 V DC |
Supply Voltage Range | 18.5 V DC ... 32 V DC (including ripple) |
Supply current | typ. 120 mA (plus sensor current) |
Ripple | Max 3.6 VSS within the permissible voltage range |
Electrical isolation/isolation of the voltage ranges
Test voltage: Between bus logic and outputs | 500 V AC, 50 Hz, 1 min. |
Digital:
Input name | Digital inputs |
Number of Inputs | 8 |
Connection technology | 2-, 3-, 4-conductor |
Input voltage range "0" signal | -30 V DC ... 5 V DC |
Input voltage range "1" signal | 11 V DC ... 30 V DC |
Typical input current per channel | 3 mA |
Delay at signal change from 0 to 1 | 1.5 ms |
Delay at signal change from 1 to 0 | 3.5 ms |
Protective circuit | Electronic short-circuit/overload protection |
Output name | Relay output |
Number of Outputs | 8 |
Output Voltage | 24 V |
Maximum output current per group | 2 A |
Maximum Output Current per channel | 0.5 A |
Nominal Output Voltage | 24 V |
Output voltage when switched off | max. 0.5 V |
Output current when switched off | 0 A |
Nominal load, inductive | 12 VA (1.2 H, 48 Ω) |
Nominal load, lamp | 12 W |
Nominal load, ohmic | 12 W |
Maximum operating frequency with ohmic nominal load | max. 1 kHz |
Behavior with overload | Auto restart |
Behavior with inductive overload | Output can be destroyed |
Overcurrent shut-down | min. 0.7 A |
Output current with ground connection interrupt when switched off | max. 0 mA |
INTERBUS
Connection Method | Optic fiber (polymer fiber 980/1000 µm) |
Transmission Speed | 500 kbps |
Transmission physics | FO |
Dimensions
Width | 185 mm |
Height | 193 mm |
Depth | 138 mm |
Note on dimensions | with bus connection plugs and mounting panel |
Ambient conditions
Ambient Temperature (Operation) | -20 °C ... 55 °C |
Degree of Protection | IP67, when screwed together |
Note | Seal unused slots/connections to ensure the degree of protection. |
Air pressure (operation) | 860 hPa ... 1080 hPa (up to 1500 m above sea level) |
Air pressure (storage/transport) | 660 hPa ... 1080 hPa (up to 3500 m above sea level) |
Ambient temperature (storage/transport) | -25 °C ... 70 °C |
Permissible humidity (operation) | 100 % |
Permissible humidity (storage/transport) | 95 % (non-condensing) |
Standards and Regulations
Protection class | III (IEC 61140, EN 61140, VDE 0140-1) |
Mounting
Mounting Type | Wall mounting |
Why Proax for Phoenix Contact 2734044?
Proax is an authorized distributor of Phoenix Contact 2734044 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 1 |
Recommended