M12 panel feed-through, front mounting
Official DistributorSKU
MPN
VS-08-DSIV-L180-HYB SCO
Weight
0.011 kg
This product is Not Cancellable/Not Returnable
Series VS
VS-08-DSIV-L180-HYB SCO - Device connector rear mounting
Device connector rear mounting, Ethernet CAT5 (IEC 11801:2002), 8-position, Socket, straight, M12-SPEEDCON, coding: Y, PCB mounting, M12 x 1, THR solder connection, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239824
Technical Specifications
Notes
| Notes on operation | The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
Mounting
| Mounting Type | PCB mounting M12 x 1 |
Product properties
| Sensor Type | Ethernet |
| Number of Positions | 8 |
| Shielded | yes |
| Coding | Y |
| Thread type | M12 |
Insulation characteristics
| Degree of pollution | 3 |
Dimensions
| Length of the solder pin | 2.3 mm |
| Length of the solder pin | 2.3 mm |
Material specifications
| Flammability rating according to UL 94 | V0 |
| Seal material | EPDM |
| Contact Material | CuZn |
| Contact surface material | Au |
| Contact carrier material | PPA |
| Material for screw connection | Zinc die-cast, nickel-plated |
Electrical properties
| Rated surge voltage | 0.8 kV |
| Contact resistance | ≤ 3 mΩ |
| Insulation resistance | > 100 MΩ |
| Nominal voltage UN | 48 V AC (Power and data) |
| Nominal voltage UN | 50 V DC (Power and data) |
| Nominal current IN | 0.5 A (Data) |
| Nominal current IN | 6 A (Power) |
| Transmission characteristics (category) | CAT5 (IEC 11801:2002) |
Conductor connection
| Connection Method | THR solder connection |
| Contact connection type | Socket |
| Tightening torque | 1.5 Nm ... 2 Nm (Housing, installation side) |
Mechanical data
| Insertion/withdrawal cycles | ≥ 100 |
Connection 1
| Head design | Socket |
| Head cable outlet | straight |
| Head thread type | M12 |
| Head locking type | SPEEDCON |
| Coding | Y |
Cable/line
| Signal type/category | Ethernet CAT5 (IEC 11801:2002) |
Ambient conditions
| Degree of Protection | IP67 (When plugged in) |
| Degree of Protection | IP67 |
| Ambient Temperature (Operation) | -40 °C ... 85 °C |
Why Proax for Phoenix Contact 1456666?
Proax is an authorized distributor of Phoenix Contact 1456666 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 20 |
Recommended
1654594 - Assembled Ethernet cable, CAT5e, shielded, 2-pair, 24 solid (1-wire) AWG, RAL 5021 (water blue), RJ45/IP67 on open cable end, customer-specific assignment, length: 4 m
1404540 - Assembled Ethernet cable, CAT5e, shielded, 2 x 4 x 26 AWG, stranded (7-wire), RAL 5021 (water-blue), RJ45 plug/IP20 on RJ45 socket module/IP20 for Freenet system, length: 0.5 m- 1404553 - Assembled Ethernet cable, CAT5e, shielded, 2 x 4 x 26 AWG, stranded (7-wire), RAL 5021 (water-blue), RJ45 plug/IP20 on RJ45 socket module/IP20 for Freenet system, length: 1 m
1424009 - RJ45 jack insert, degree of protection: IP20, number of positions: 8, material: Copper alloy, connection method: IDC, connection cross section: AWG 26- 22
1652952 - RJ45 socket insert, for the Freenet system, CAT5e, 8-pos., shielded, socket on socket
1652936 - RJ45 jack insert, design: RJ45, degree of protection: IP20, number of positions: 8, CAT5, material: Metal, connection method: IDC connection, connection cross section: AWG 24- 22, Ethernet
1653090 - RJ45 PCB connectors, design: RJ45, degree of protection: IP20, number of positions: 8, material: Metal, connection method: THT wave, cable outlet: straight
1653087 - RJ45 PCB connectors, design: RJ45, degree of protection: IP20, number of positions: 8, 1 Gbps, CAT5 (IEC 11801:2002), material: Metal, connection method: THT wave, cable outlet: straight
1653168 - RJ45 socket insert, modular (Keystone), CAT6, 8-pos., shielded, with cable connection (LSA), for litz and solid wires AWG 26 ... 22
1689064 - RJ45 coupling, degree of protection: IP20, number of positions: 8, 1 Gbps, CAT5, material: Plastic, connection method: Coupling, Keystone, Ethernet
1689459 - RJ45 socket insert, modular (Keystone), CAT5e, 8-pos., shielded, with cable connection (LSA), for solid wires AWG 26 ... 22
1688625 - RJ45 socket insert, 8x, for PCB assembly, CAT5e, 8-pos., shielded, with angled solder pins
1688612 - RJ45 socket insert, 6x, for PCB assembly, CAT5e, 8-pos., shielded, with angled solder pins
1405617 - RJ45 coupling, degree of protection: IP20, number of positions: 8, 1 Gbps, CAT5 (IEC 11801:2002), material: PA-GF, for VS-08 and push-pull panel mounting frames
1689226 - RJ45 bend protection sleeve, for pin insert VS-08-ST-RJ45, cable cross section up to 6 mm, color: green
1689213 - RJ45 bend protection sleeve, for pin insert VS-08-ST-RJ45, cable cross section up to 6 mm, color: gray
1654756 - RJ45 bend protection sleeve, for pin inserts VS-08-ST-H11-RJ45 and VS-08-ST-H21-RJ45, for cable cross section up to 7 mm, color: green
1654743 - RJ45 bend protection sleeve, for pin inserts VS-08-ST-H11-RJ45 and VS-08-ST-H21-RJ45, for cable cross section up to 7 mm, color: gray
