Proax
CADEN
0 Items
Products
Manufacturers
Expertise
About UsBlogQuick OrderContact UsClearance
proax logo
Cart
Phoenix Contact 1436408
AllConnectorsDevice connectors

1436408

Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
PHX1436408
MPN
SACC-E-M12MS-8CON-M16 PSCUP
Weight
0.006 kg
Series SACC-E-M

SACC-E-M12MS-8CON-M16 PSCUP - Device connector front mounting

Sensor/actuator flush-type connector, male, 8-pos., M12, A-coded, front/screw mounting with M16 thread, with solder cups, plastic version

Technical Specifications

Notes

Notes on operationThe electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.

Mounting

Mounting TypeFront mounting M16 x 1.5 With flat nut
Assembly instructionsWith flat nut

Product properties

Number of Positions8
No. of cable outlets1
CodingA
Thread typeM12

Insulation characteristics

Overvoltage categoryII
Degree of pollution3

Material specifications

Colorblack
Flammability rating according to UL 94HB
Seal materialViton
Contact MaterialCuZn
Contact surface materialAu
Contact carrier materialPA 6.6
Material for screw connectionPA 6.6

Electrical properties

Rated surge voltage0.8 kV
Contact resistance≤ 3 mΩ
Insulation resistance≥ 100 MΩ
Nominal voltage UN30 V
Nominal current IN2 A

Conductor connection

Connection MethodSolder cup
Contact connection typePin
Conductor cross section flexible... 0.25 mm²
Tightening torque1.25 Nm ... 1.5 Nm (Installation-side)

Mechanical data

Insertion/withdrawal cycles> 100

Connection 1

Head designPin
Head cable outletstraight
Head thread typeM12
CodingA

Ambient conditions

Degree of ProtectionIP67
Degree of ProtectionIP67
Ambient Temperature (Operation)-25 °C ... 85 °C (Plug / socket)
Ambient Temperature (Operation)-40 °C ... 85 °C (without mechanical actuation)

M12

Standard designationM12 connector
Standards/specificationsIEC 61076-2-101
Accessories
  • Phoenix Contact1560251
    1560251
    Sealing cap - PROT-M12 FS
  • Phoenix Contact1430488
    1430488
    M12 metal sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field
  • Phoenix Contact1430394
    1430394
    Flat gasket - SACC-M16-SEAL CLM

Why Proax for Phoenix Contact 1436408?

Proax is an authorized distributor of Phoenix Contact 1436408 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size20
Recommended
  • Phoenix Contact1436440
    1436440
    SACC-E-M12MS-8CON-M12 PSCUP - Sensor/actuator flush-type connector, socket, 8-pos., M12, A-coded, front/screw mounting with M12 thread, with solder cups, plastic version
  • Phoenix Contact1561690
    1561690
    SACC-E-M12MS-8CON-M16/0,1-0,14 - Device connector front mounting, Universal, 8-position, Pin, straight, M12-Standard, coding: A, on free cable end, Front mounting, M16 x 1.5, Individual wires, cable length: 0.1 m, 0.14 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1240081
  • Phoenix Contact1513813
    1513813
    SACC-E-M12MS-8CON-M16/0,5 - Sensor/Actuator flush-type plug, 8-pos., M12, A-coded, front/screw mounting with M16 thread, with 0.5 m TPE litz wire, 8 x 0.25 mm2
  • Phoenix Contact1436424
    1436424
    SACC-E-M12MS-8CON-M16/0,5 P - Device connector front mounting, Universal, 8-position, Pin, straight, M12-Standard, coding: A, on free cable end, Front mounting, M16 x 1.5, Individual wires, cable length: 0.5 m, 0.25 mm2, TPE litz wire
  • Phoenix Contact1405221
    1405221
    SACC-E-M12MS-8CON-M16/0,5 VA - Device connector front mounting, Universal, 8-position, Pin, straight, M12-Standard, coding: A, on free cable end, Front mounting, M16 x 1.5, Individual wires, cable length: 0.5 m, 0.25 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1238711
  • Phoenix Contact1408442
    1408442
    SACC-E-M12MS-8CON-M20/0,5 - Device connector front mounting, Universal, 8-position, Pin, straight, M12, coding: A, on free cable end, Front mounting, M20 x 1,5, Individual wires, cable length: 0.5 m, 0.25 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1238772
  • Phoenix Contact1452107
    1452107
    SACC-E-M12MS-8CON-M20/0,5 VA - Device connector front mounting, 8-position, Pin, straight, M12, coding: A, on free cable end, Front mounting, M20 x 1,5, Individual wires, cable length: 0.5 m, 0.25 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239796
  • Phoenix Contact1554571
    1554571
    SACC-E-M12MS-8CON-PG 9/0,5 VA - Device connector front mounting, Universal, 8-position, Pin, straight, M12-Standard, coding: A, on free cable end, Front mounting, Pg9, Individual wires, cable length: 0.5 m, 0.25 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1240037
  • Phoenix Contact1513774
    1513774
    SACC-E-M12MS-8CON-PG9/0,5 - Device connector front mounting, Universal, 8-position, Pin, straight, M12-Standard, coding: A, on free cable end, Front mounting, Pg9, Individual wires, cable length: 0.5 m, 0.25 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239867
  • Phoenix Contact1514760
    1514760
    SACC-E-M12MS-8CON-SQ26/0,5 - Sensor/Actuator flush-type plug, 8-pos., M12, A-coded, front/square flange mounting, with 0.5 m TPE litz wire, 8 x 0.25 mm2
  • Phoenix Contact1436437
    1436437
    SACC-E-M12MS-5CON-M12 PSCUP - Sensor/actuator flush-type connector, male connector, 5-pos., M12, A-coded, front/screw mounting with M12 thread, with solder cups, plastic version
  • Phoenix Contact1436398
    1436398
    SACC-E-M12MS-5CON-M16 PSCUP - Sensor/actuator flush-type connector, male, 5-pos., M12, A-coded, front/screw mounting with M16 thread, with solder cups, plastic version
  • Phoenix Contact1501595
    1501595
    SACC-E-M12MS-5CON-M16/0,5 - Sensor/Actuator flush-type plug, 5-pos., M12, A-coded, front/screw mounting with M16 thread, with 0.5 m TPE litz wire, 5 x 0.34 mm2
  • Phoenix Contact1436411
    1436411
    SACC-E-M12MS-5CON-M16/0,5 P - Device connector front mounting, Universal, 5-position, Pin, straight, M12-Standard, coding: A, on free cable end, Front mounting, M16 x 1.5, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire
  • Phoenix Contact1458868
    1458868
    SACC-E-M12MS-5CON-M16/0,5 VA - Device connector front mounting, Universal, 5-position, Pin, straight, M12-Standard, coding: A, on free cable end, Front mounting, M16 x 1.5, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire
  • Phoenix Contact1575550
    1575550
    SACC-E-M12MS-5CON-M16/1,0 - Device connector front mounting, Universal, 5-position, Pin, straight, M12, coding: A, on free cable end, Front mounting, M16 x 1.5, Individual wires, cable length: 1 m, cable gland M16 x 1.5, 0.25 mm2, TPE litz wire
  • Phoenix Contact1408446
    1408446
    Device connector front mounting, Universal, 5-position, Pin, straight, M12, coding: A, on free cable end, Front mounting, M20 x 1,5, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1238773
  • Phoenix Contact1452068
    1452068
    SACC-E-M12MS-5CON-M20/0,5 VA - Device connector front mounting, 5-position, Pin, straight, M12, coding: A, on free cable end, Front mounting, M20 x 1,5, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire
  • Phoenix Contact1554568
    1554568
    SACC-E-M12MS-5CON-PG 9/0,5 VA - Device connector front mounting, Universal, 5-position, Pin, straight, M12-Standard, coding: A, on free cable end, Front mounting, Pg9, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire
  • Phoenix Contact1563973
    1563973
    "SACC-E-M12MS-5CON-PG9/0,115TIN"
Sold in quantities of 20

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability