Official DistributorSKU
AZ Series EtherCAT Compatible Driver (Single-Phase / Three-Phase 200-240 VAC)
AZ Series AC input drivers now comes with EtherCAT communications for a battery-free, absolute mechanical sensor motor and driver solution. For use with all Oriental Motor AZ Series motors and linear & rotary actuators equipped with the AZ Series.
- Built-in Protective Functions
- Monitoring Functions
- Support Software for Paramater Setting (free download)
- For use with AC Input AZ Series Motors
Technical Specifications
| Driver Type | EtherCAT Compatible |
| Power Supply | Single-Phase/Three-Phase 200-240 VAC |
| Control Power Supply | 24 VDC ±5%, 0.25 A (0.5 A for Electromagnetic Brake) |
| Interface - Pulse Input | 2 points, PhotocouplerMaximum input pulse frequencyScanner provides line driver output: 1 MHz (50% duty)Scanner provides open collector output:250 kHz (50% duty) |
| Interface - Control Input | 6 points, Photocoupler |
| Interface - Pulse Output | 2 points, Line driver |
| Interface - Control Output | 6 points, Photocoupler/Open collector |
| Interface - Power Shut Down Signal Input | 2 points, Photocoupler |
| Interface - Power Shut Down Monitor Output | 1 point, Photocoupler/Open collector |
| Interface - Field Network | EtherCAT |
| Degree of Protection | IP10 |
| Insulation Resistance (Driver) | When a 500 VDC megger is applied to the following locations, resistance is 100MΩ or higher.Between the PE terminal and main power supply terminalBetween the encoder connector and main power supply terminalBetween the input signal terminal and main power supply terminal. |
| Dielectric Strength (Driver) | No abnormalities are observed when the specified voltages are applied for 1 minuteBetween the protective earth terminal and main power supply 1.5 kVAC 50/60 HZBetween the encoder connector and the mian power supply terminal 1.8 kVAC 50/60 HzBetween the input signal terminal and main power supply terminal 1.8 kVAC 50/60 Hz |
| Ambient temperature range | 0ºC ~ +55ºC (+32ºF ~ +131ºF) (nonfreezing) |
| Ambient Humidity | 85% max. (noncondensing) |
| Operating Atmosphere | No corrosive gases or dust. Cannot be used in radioactive area, magnetic field, vacuum or other special environment. |
| Communication Standards | IEC 61158 Type12 |
| Physical Layer | 100 BASE-TX (IEEE 802.3) |
| Transmission rate | 100 Mbps |
| Communication Cycle | Free Run Mode: 1 ms or moreSM2 Event Synchronization Mode: 1 ms or moreDC Mode: 0.25 ms, 0.5 ms, 1 ms, 2 ms, 3 ms, 4 ms, 5 ms, 6 ms, 7 ms, 8 ms |
| Communication Port | RJ45x2 (Shielded)ECAT IN: EtherCAT InputECAT OUT: EtherCAT Output |
| Topology | Daisy Chain (Up to 65,535 Nodes) |
| Process Data | Variable PDO Mapping |
| Sync Manager | SM0: Mailbox OutputSM1: Mailbox InputSM2: Process Data OutputSM3: Process Data Input |
| Mailbox (CoE) | Emergency MessageSDO RequestSDO ResponseSDO Information |
| Synchronization Mode | Free Run Mode (Asynchronous)SM2 Event Synchronization ModeDC Mode (SYNC0 Event Synchronization) |
| Device profile | IEC 61800-7 CiA402 Drive Profile |
Why Proax for Oriental Motor AZD-CED?
Proax is the authorized distributor of Oriental Motor AZD-CED. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Alternate Names | AZDCED |
| Pack Size | 1 |
