The figure shows a product version of the article
Official DistributorSKU
MPN
PSR-CT-F-SEN-1-8
Weight
0.04 kg
This product is Not Cancellable/Not Returnable
PSR-CT-F-SEN-1-8 - Safety switch sensor
Proximity safety circuit up to Cat. 4, PL e (EN ISO 13849), SIL 3 (IEC 61508), fixcode sensor with RFID coding, model 4 (EN ISO 14119), automatic or manual start, integrated diagnostics, 24 V DC supply, IP69K, M12 connector
- Integrated reset function on the switch
- 4 actuation settings, 3 travel directions
- Tamper protection via RFID transponder technology
- Rapid diagnostics, thanks to comprehensive status information
- Consistent M12 connection technology for convenient installation
- Safe series connection in accordance with EN ISO 14119
- Flexible use, thanks to compact design
- Safe, cost-effective complete solution
Technical Specifications
Product properties
| Application | Safety door monitoring |
| Application | Position monitoring |
| Technology | Transponder |
Insulation characteristics
| Protection class | III |
Times
| Discrepancy time | max. 10 ms (between the safety outputs) |
| Switch-on delay | typ. 5 s (after switching UB on) |
| Switch-on time | max. 400 ms (for the safety outputs) |
| Risk time | max. 125 ms (Stand-alone device) |
| Test pulses | typ. 300 µs (Test pulse duration) |
| Test pulses | approx. 100 ms (Test pulse interval) |
| Delay time | typ. 10 ms (Risk time delay per device) |
Electrical properties
| Short-circuit current | typ. 100 A (conditional short-circuit current) |
| Switching frequency | max. 1 Hz |
| Rated Insulation Voltage | max. 300 V |
| Rated surge voltage | max. 1.5 kV |
Supply
| Supply Voltage | 24 V DC ±15 % (PELV, controlled, residual ripple < 5% ) |
| Current consumption | max. 40 mA |
| Protection | min. 0.25 A (to be performed externally) |
| Protection | max. 8 A (to be performed externally) |
Signal
| Designation | DGN |
| Output description | p-wired |
| Number of Outputs | 1 |
| Output Voltage | min. (UB - 1.5 V (HIGH)) |
| Output Voltage | max. (UB (HIGH)) |
| Output Voltage | min. 0 V DC (LOW) |
| Output Voltage | max. 1 V DC (LOW) |
| Current | min. 1 mA |
| Current | max. 50 mA |
| Short-circuit-proof | yes |
Safety output
| Designation | FO1A, FO1B |
| Output description | Semiconductor outputs, p-wired |
| Number of Outputs | 2 |
| Output Voltage | min. (UB - 1.5 V (HIGH FO1A, FO1B)) |
| Output Voltage | max. (UB (HIGH FO1A, FO1B)) |
| Output Voltage | min. 0 V DC (LOW FO1A/FO1B) |
| Output Voltage | max. 1 V DC (LOW FO1A/FO1B) |
| Switching current | min. 1 mA (per safety output) |
| Switching current | max. 150 mA (per safety output) |
| Residual current | ≤ 0.25 mA |
| Utilization category in accordance with IEC 60947-5-2 | 150 mA (24 V (DC13)) |
| Short-circuit-proof | yes |
| Note on protection circuit | NOTE: Protect the outputs under inductive loads with a freewheeling diode. |
Connection technology
| Connection technology | M12 connector |
| pluggable | no |
| Number of Positions | 8 |
Conductor connection
| Connection Method | Connector |
Signaling
| Status display | 2 LEDs |
Dimensions
| Width | 26.5 mm |
| Height | 40 mm |
| Depth | 18 mm |
| Minimum distance | 140 mm (between two safety circuits) |
| Minimum distance | 7 mm (between sensor and actuator when traveling in the Y-direction) |
Material specifications
| Color (Housing) | yellow (RAL 1018) |
| Housing Material | PBT |
Safety data: EN ISO 13849
| Category | 4 |
| Performance level (PL) | e |
Safety data: IEC 61508 - High demand
| Safety Integrity Level (SIL) | 3 |
Ambient conditions
| Degree of Protection | IP65/IP67/IP69/IP69K |
| Degree of Protection | IP67 (with SAC cabling) |
| Ambient Temperature (Operation) | -25 °C ... 55 °C |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Vibration (Operation) | in accordance with EN 60947-5-2 |
Conformity/Approvals
| EMC conformance | EN 60947-5-3 |
Mounting
| Mounting Type | not flush |
| Assembly instructions | Note EN ISO 14119 |
| Assembly instructions | Maximum tightening torque to secure: 0.8 Nm |
| Mounting Position | any |
Accessories
Why Proax for Phoenix Contact 2702976?
Proax is an authorized distributor of Phoenix Contact 2702976 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
