Popular Brands in { name }

Discover { name } at Proax - Canada's top automation distributor. Easy pick-up, fast shipping. Explore now.

Shop { name } Online

**Here are some possible reasons why:**
- You may’ve typed the wrong search term, such as a misspelled product name or special characters/symbols.
- We might not carry the product you're looking for

Please try refining your search by not using special characters.

**Are these not the issues? Feel free to contact us and we'll assist you as quickly as possible.**

Search

Ambient Temperature (Operation)

-20 °C ... 60 °C

-40 °C ... 60 °C

-25 °C ... 70 °C

Ambient temperature (storage/transport)

-20 °C ... 85 °C

-40 °C ... 85 °C

B10d

4200000 Cycles (DC13; 24 V / 0,75 A; 1 NO)

740000 Cycles (DC13; 24 V / 1,5 A; 1 NO)

360000 Cycles (DC13; 24 V / 3 A; 1 NO)

4600000 Cycles (AC15; 250 V / 0,75 A; 1 NO)

560000 Cycles (AC15; 250 V / 2 A; 1 NO)

180000 Cycles (AC15; 250 V / 3 A; 1 NO)

1800000 Cycles (AC1; 250 V / 1,5 A; 1 NO)

900000 Cycles (AC1; 250 V / 3 A; 1 NO)

600000 Cycles (AC1; 250 V / 6 A; 1 NO)

208000 Cycles (DC13, 24 V / 2 A, 1 NO)

318000 Cycles (DC13, 24 V / 1 A, 1 NO)

170000 Cycles (AC15; 250 V / 2 A; 1 NO)

810000 Cycles (AC15, 250 V / 0.5 A, 1 NO)

Conductor cross section AWG

26 ... 14

26 ... 16 (flexible)

26 ... 16 (solid)

Conductor cross section flexible

0.2 mm² ... 2.5 mm² (Single ferrule)

0.14 mm² ... 2.5 mm²

2x 0.5 mm² ... 1 mm² (TWIN ferrule)

0.14 mm² ... 1 mm² (Ferrule with plastic sleeve, two conductors on double terminal block)

0.14 mm² ... 1.5 mm² (Ferrule with plastic sleeve)

0.14 mm² ... 1.5 mm²

2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)

Degree of Protection

acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20

acc. to IEC 60529, IEC 60947-1, EN 60529 Auxiliary Terminals IP20

IP20

Height

80 mm

96 mm

29 mm

Identification

UL 508 Recognized

UL 508

EN 60068-2-60

ISA-S71.04. G3 Harsh Group

Insulation

Safe isolation, reinforced insulation

Safe isolation, reinforced insulation and 6 kV between coil and contact circuit and between contacts 11-12 and 13-14, 41-42 to 23-24, 33-34

Basic insulation

Interrupting rating (ohmic load) max.

1500 VA (250 V AC)

144 W (24 V DC)

110 W (220 V DC)

88 W (110 V DC)

288 W (48 V DC)

50 W (220 V DC)

55 W (110 V DC)

75 W (60 V DC)

100 W (48 V DC)

Maximum Switching Voltage

250 V AC/DC

300 V DC

250 V AC

Mechanical service life

approx. 10⁷ cycles

approx. 107 cycles

Overvoltage category

Rated Insulation Voltage

250 V AC (Input/output)

Rated surge voltage

6 kV

6 kV (Input/output)

Standards/regulations

IEC 60947-5-1

DIN EN 61810-3

EN 61810-1

IEC 61810-3

DIN EN 50178

IEC 60664-1

Switching capacity

3 A (230 V, AC15)

3 A (24 V, DC13)

3 A (230 V (AC15))

2 A (24 V (DC13))

Omron

Phoenix Contact

G7SA-5A1B DC24

Safety relay, plug-in, 5PST-NO, SPST-NC, 6 A, forcible-guided contacts, 24 VDC

G7SA-4A2B DC24

Safety relay, plug-in, 4PST-NO, DPST-NC, 6 A, forcible-guided contacts, 24 VDC

G7SA-3A1B DC24

Safety relay, plug-in, 3PST-NO, SPST-NC, 6 A, forcible-guided contacts, 24 VDC

G7S-4A2B-E DC24

Safety relay, plug-in, 4PST-NO, 2PST-NC, 10 A, forcibly-guided contacts, 24 VDC

G7SA-2A2B DC24

Safety relay, plug-in, DPST-NO, DPST-NC, 6 A, forcibly-guided contacts, 24 VDC

G7SA-3A3B DC24

Safety relay, plug-in, 3PST-NO, 3PST-NC, 6 A, forcible-guided contacts, 24 VDC

<h3>RIF-RPT-LDP-24DC/1X2/3X1/AU/FG - Relay Module</h3>Relay module with Push-in connection, consisting of: relay base with status LED, freewheeling diode, and retaining bracket, safety relay with force-guided contacts in accordance with DIN EN 61810-3, contact switching type: 3 N/O contacts and 1 N/C contact, input voltage: 24 V DC

1148703

Relay Module - RIF-RPT-LDP-24DC/1X2/3X1/AU/FG

<h3>RIF-RPT-LDP-24DC/2X2/2X1/AU/FG - Relay Module</h3>Relay module with Push-in connection, consisting of: relay base with status LED, freewheeling diode, and retaining bracket, safety relay with force-guided contacts in accordance with DIN EN 61810-3, contact switching type: 2 N/O contacts and 2 N/C contacts, input voltage: 24 V DC

1148699

Relay Module - RIF-RPT-LDP-24DC/2X2/2X1/AU/FG

G7S-3A3B-E DC24

Safety relay, plug-in, 3PST-NO, 3PST-NC, 10 A, forcibly-guided contacts, 24 VDC

NSL... contactor relays are used for switching auxiliary circuits and control circuits. The NSL..S contactor relays are the spring terminal version of the NSL... range. - Poles and auxiliary contacts blocks: 4-pole contactor relays, front-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1 including the "Mechanically Linked" symbol on the contactor relay side) - Control circuit: DC operated with solid core magnet circuit. The polarity on the coil terminals (A1+ and A2-) must be respected - Accessories: a wide range of accessories is available NSL... contactors are fitted with low consumption DC coils and are suitable for a direct control by PLC outputs.

NSL31ES-81

NSL... contactor relays are used for switching auxiliary circuits and control circuits. - Poles and auxiliary contacts blocks: 4-pole contactor relays, front-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1 including the "Mechanically Linked" symbol on the contactor relay side) - Control circuit: DC operated with solid core magnet circuit. The polarity on the coil terminals (A1+ and A2-) must be respected - Accessories: a wide range of accessories is available NSL... contactors are fitted with low consumption DC coils and are suitable for a direct control by PLC outputs.

NSL31E-81

<h3>REL-SR- 24DC/2X21/FG - Safety relays</h3>Safety relay with force-guided contacts in accordance with DIN EN 61810-3, contact switching type: 2 changeover contacts. The requirements for type A in accordance with DIN EN 61810-3 are satisfied if the circuit is designed as 1 N/O contact / 1 N/C contact.

2908777

NSL... contactor relays are used for switching auxiliary circuits and control circuits. - Poles: 8-pole contactor relays (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1 including the "Mechanically Linked" symbol on the contactor relay side) - Control circuit: DC operated with solid core magnet circuit. The polarity on the coil terminals (A1+ and A2-) must be respected - Accessories: a wide range of accessories is available NSL... contactors are fitted with low consumption DC coils and are suitable for a direct control by PLC outputs.

NSL44E-81

<h3>PLC-RPT- 24DC/2X21/FG - Relay Module</h3>PLC-INTERFACE, consisting of a relay base and plug-in safety relay with force-guided contacts in accordance with DIN EN 61810-3, Push-in connection, 2 changeover contacts, forcibly actuated, Freewheeling diode, Input voltage: 24 V DC

2910537

<h3>PLC-RSC- 24UC/2X21/FG - Relay Module</h3>PLC-INTERFACE, consisting of a relay base and plug-in safety relay with force-guided contacts in accordance with DIN EN 61810-3, Screw connection, 2 changeover contacts, forcibly actuated, Bridge rectifier, Input voltage: 24 V AC/DC

2910536

<h3>PLC-RSC- 24DC/2X21/FG - Relay Module</h3>PLC-INTERFACE, consisting of a relay base and plug-in safety relay with force-guided contacts in accordance with DIN EN 61810-3, Screw connection, 2 changeover contacts, forcibly actuated, Freewheeling diode, Input voltage: 24 V DC

2910535

<h3>PLC-RPT- 24UC/2X21/FG - Relay Module</h3>PLC-INTERFACE, consisting of a relay base and plug-in safety relay with force-guided contacts in accordance with DIN EN 61810-3, Push-in connection, 2 changeover contacts, forcibly actuated, Bridge rectifier, Input voltage: 24 V AC/DC

2910539

NSL22E-81

NSL... contactor relays are used for switching auxiliary circuits and control circuits. - Poles and auxiliary contacts blocks: 4-pole contactor relays, front-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1) - Control circuit: DC operated with solid core magnet circuit. The polarity on the coil terminals (A1+ and A2-) must be respected - Accessories: a wide range of accessories is available NSL... contactors are fitted with low consumption DC coils and are suitable for a direct control by PLC outputs.

NSL40E-81

NSL... contactor relays are used for switching auxiliary circuits and control circuits. The NSL..S contactor relays are the spring terminal version of the NSL... range. - Poles and auxiliary contacts blocks: 4-pole contactor relays, front-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1) - Control circuit: DC operated with solid core magnet circuit. The polarity on the coil terminals (A1+ and A2-) must be respected - Accessories: a wide range of accessories is available NSL... contactors are fitted with low consumption DC coils and are suitable for a direct control by PLC outputs.

NSL40ES-81

A forcible guided relay is regularly used in combination with other safety devices like door switches or light curtains to control safety outputs. The G7SA series offers a compact and slim design, reinforced insulation, and a four or six-pole configuration that can be soldered directly to a PCB or used together with the push-in terminal sockets to save time during the installation.<ul>
<li>Forcibly guided contacts</li>
<li>Conforms to EN 50205</li>
<li>6A at 240VAC and 6A at 24VDC for resistive loads</li>
<li>Reinforced insulation between inputs and outputs and poles</li>
<li>4- and 6-pole relays available</li>
<li>Push-in Plus Technology - easy wiring</li>
</ul>

G7SA Forcibly Guided Relay

Complete your interlocking safety circuits with the slim G7S-E relay family with forcibly guided contacts. The G7S-E is available as a six-pole type in two different contact combinations and switchiig capacity up to 10A.  The terminals are arranged for easy PCB layout and it can either be soldered directly to a PCB or used together with the P7SA sockets.<ul>
<li>Forcibly guided contacts</li>
<li>Conforms to EN 50205</li>
<li>NO contacts: 10 A at 250 VAC and 10 A at 30 VDC, NC contacts: 6 A at 250 VAC and 6 A at 30 VDC (for resistive loads)</li>
<li>Reinforced insulation between inputs and outputs and poles</li>
<li>4- and 6-pole relays available</li>
</ul>

G7S-E Forcibly Guided Relay

Phoenix Contact PLC-RPT Series – Compact relay modules for reliable switching in control cabinets and industrial automation systems. Features slim DIN-rail design with push-in terminals for tool-free installation.Series Options:<ul><li>Universal Relays: Standard switching with single/dual changeover contacts</li><li>High-Current (HC): Up to 10 A continuous load capacity</li><li>Gold-Plated (AU): Optimized for low-power signal switching</li><li>Manual Switch (MS): Integrated test buttons and LED indication</li><li>Voltage Range: 12 V DC to 230 V AC/DC compatibility</li></ul>Key Benefits:
Space-saving slim profile, tool-free push-in connections, comprehensive voltage and contact options, LED status indication available, and reliable performance in demanding industrial environments.Applications: Industrial automation, control panel switching, signal isolation, and load control.

PLC-RPT

The Phoenix Contact PLC-RSC Series is part of the PLC-INTERFACE family, offering compact relay modules designed for efficient signal isolation and amplification in industrial automation systems. These DIN rail-mounted modules feature plug-in miniature relays with power contacts for reliable control applications.Compact Design: At just 6.2 mm width, PLC-RSC modules maximize control cabinet space efficiency and enable high-density installations.Versatile Contact Configurations: Available in single changeover (SPDT) and double changeover (DPDT) contact types to meet diverse switching requirements.Wide Input Voltage Range: Compatible with 24 V DC, 230 V AC, and 220 V DC systems, providing flexible integration across different control architectures.High Switching Capacity: Handles currents up to 6 A for both resistive and inductive loads, suitable for demanding industrial applications.Integrated Protection: Built-in reverse polarity protection and freewheeling diodes ensure safe, reliable operation and extend component life.Manual Operation Option: Select models include manual operation levers for simplified testing and maintenance without external actuation.Applications: Ideal for signal isolation, load switching, and interface applications in PLCs, motor control centers, and automated manufacturing systems.

Force Guided Relays

Series

G7SA Forcibly Guided Relay

G7S-E Forcibly Guided Relay

RIF-RPT-LDP

Popular Brands in Force Guided Relays