Popular Brands in { name }

Discover { name } at Proax - Canada's top automation distributor. Easy pick-up, fast shipping. Explore now.

Shop { name } Online

**Here are some possible reasons why:**
- You may’ve typed the wrong search term, such as a misspelled product name or special characters/symbols.
- We might not carry the product you're looking for

Please try refining your search by not using special characters.

**Are these not the issues? Feel free to contact us and we'll assist you as quickly as possible.**

Search

Omron

Phoenix Contact

Sprecher Schuh

NFZ contactor relays are used for switching auxiliary and control circuits. NFZ contactor relays with coil 30 include a 24 V DC electronic coil interface with a built-in surge suppression, obtaining a reduced holding coil consumption up to 1.7 W for a low panel energy consumption and a direct control by PLC-output ≥ 250 mA 24 V DC, without need of additional interface relay. Only NFZ..-30 contactor relays need to respect the polarity on the coil terminals (A1+ and A2-). - Poles: 4-pole contactor relays (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1 and including the "Mechanically Linked" symbol on the contactor relay side) - Accessories: a wide range of accessories is available.

NFZ40E-30

PS2-4-2-125 3-phase busbars ensure a quick and safe connection of 4 MS165 manual motor starters with 2 lateral auxiliary contacts and are therefore a cost effective solution. The rated current is 125 A.

PS2-4-2-125

PS2-4-2-125 3-phase busbar for 4 MS165 with 2 HK/SK, Ie=125A

Signaling contacts SK1-K with Push-in spring terminals signal the tripping of the manual motor starter. For SK1 the indication on the device itself is done with a protruding orange button. The contact positions of SK1 need to be manually reset after a tripping event by pushing the orange button. SK1-K signaling contacts signal tripping regardless if it was caused by short-circuit, overload or electrical release (AA1 or UA1). They are attached on the right side of the manual motor starter. Signaling contacts SK1-K are available as normally open or normally closed contacts.

SK1-20K

SK1-20K Signaling Contact 2 NO with Push-In terminals

A300-30-11-55

A 3-phase Contactor suitable for various applications such as Motor starting, Isolation, By-pass and Distribution application up to max 690 V.Operated with control voltage, versions from 24….690 AC, 50 and 60 Hz

3AUA0000124990

The AF09-30-10K-11 is a 3 pole - 690 V IEC or 600 UL contactor with 1 built-in auxiliary contact and push-in spring terminals, controlling motors up to 4 kW / 400 V AC (AC-3) or 5 hp / 480 V UL and switching power circuits up to 25 A (AC-1) or 25 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (24-60 V 50/60 Hz and 20-60 V DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

AF09-30-10K-11

AF09-30-10K-11 24-60V50/60HZ 20-60VDC Contactor

The AF09Z-30-01K-21 is a 3 pole - 690 V IEC or 600 UL contactor with 1 built-in auxiliary contact and Push-in spring terminals, controlling motors up to 4 kW / 400 V AC (AC-3) or 5 hp / 480 V UL and switching power circuits up to 25 A (AC-1) or 25 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (24-60 V 50/60 Hz and 20-60 V DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

AF09Z-30-01K-21

AF09Z-30-01K-21 24-60V50/60HZ 20-60VDC Contactor

The AF16-30-10K-11 is a 3 pole - 690 V IEC or 600 UL contactor with 1 built-in auxiliary contact and push-in spring terminals, controlling motors up to 7.5 kW / 400 V AC (AC-3) or 10 hp / 480 V UL and switching power circuits up to 30 A (AC-1) or 30 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (24-60 V 50/60 Hz and 20-60 V DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

AF16-30-10K-11

AF16-30-10K-11 24-60V50/60HZ 20-60VDC Contactor

The AF16Z-30-01K-21 is a 3 pole - 690 V IEC or 600 UL contactor with 1 built-in auxiliary contact and Push-in spring terminals, controlling motors up to 7.5 kW / 400 V AC (AC-3) or 10 hp / 480 V UL and switching power circuits up to 30 A (AC-1) or 30 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (24-60 V 50/60 Hz and 20-60 V DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

AF16Z-30-01K-21

AF16Z-30-01K-21 24-60V50/60HZ 20-60VDC Contactor

CA4-01K is a 1-pole front mounted auxiliary contact block equipped with Push-In Spring terminals and can be fitted on AF(C)09(Z)(B)...96 contactors and NF(C)(Z)(B) contactor relays. CA4-01K is available with 1 N.C. instantaneous contacts for standard industrial environments. With the Push-in Spring terminals, one push is all you need for a faster than ever installation, an easier than ever wiring and a reliable as ever connection.

CA4-01K

The AFS265-30-12-33 is a 3 pole - 1000 V IEC or 600 V UL contactor with  pre-mounted 1 left (1 N.O + 1 N.C.) and fixed 1 right (1 N.C.) side mounted auxiliary contact blocks with Main Circuit Bars connections, controlling motors up to 132 kW / 400 V AC (AC-3) or 200 hp / 480 V UL  and switching power circuits up to 400 A (AC-1) or 350 A UL general use. AFS contactors can be easily integrated in machine manufacturer’s systems complying with main standards EN ISO 13849 and EN 62061 - guaranteeing the safe use of your machinery and equipment. An easily identifiable yellow low energy auxiliary contact block ensures the status feedback circuits required in machine safety applications. Thanks to the AF technology, the contactor has a wide control voltage range (100-250 V 50/60 Hz and DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of  accessories.

AFS265-30-12-33

The AF26-30-00L-13 is a 3 pole - 690 V IEC or 600 UL contactor with screw terminals, controlling motors up to 11 kW / 400 V AC (AC-3) or 15 hp / 480 V UL and switching power circuits up to 45 A (AC-1) or 45 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (100-250 V 50/60 Hz and DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

AF26-30-00L-13

AF26-30-00L-13 100-250V50/60HZ-DC Contactor

The AF09Z-30-10K-21 is a 3 pole - 690 V IEC or 600 UL contactor with 1 built-in auxiliary contact and Push-in spring terminals, controlling motors up to 4 kW / 400 V AC (AC-3) or 5 hp / 480 V UL and switching power circuits up to 25 A (AC-1) or 25 A UL general use. Thanks to the AF technology, the contactor has a wide control voltage range (24-60 V 50/60 Hz and 20-60 V DC), managing large control voltage variations, reducing panel energy consumptions and ensuring distinct operations in unstable networks. Furthermore, surge protection is built-in, offering a compact solution. AF contactors have a block type design, can be easily extended with add-on auxiliary contact blocks and an additional wide range of accessories.

AF09Z-30-10K-21

AF09Z-30-10K-21 24-60V50/60HZ 20-60VDC Contactor

The EIU32.0 EtherNet/IP communication interface supports the EtherNet/IP network protocol. It is mountable onto the UMC100.3, or on a SMK3.0 mounting kit.

EIU32.0

LF16

LF26

LK75-L

LK75-L Terminals for Control Lead Connections

546A301G053

Renewal parts for the 300-Series  Contactors & motor controlers.  Coils, contact tips and armature/spring are availible to keep the equipment up and running.

55-170203G002

55-501336G002

The CA8 miniature contactors and starters provide an extremely compact and reliable method of controlling motors of 7.5 HP or less (@460V). The CA8 contactor is an economical choice for applications where space is limited or where a minimal enclosure is desired. Components are DIN-rail mountable for instant installation and modification. Fittings are also included on the CA8 for base mounting. All terminals are clearly marked and shipped in the open position for installation with either manual or power screwdrivers.<ul><li>Small And Rugged</li><li>Electrical life of 700,000 operations</li><li>Mechanical life of 10,000,000 operations.</li><li>Accessories Require No Additional Panel Space</li><li>Class 10 motor protection</li><li>Manual or Automatic reset</li><li>NO and NC contacts</li><li>Adjustable overload dial</li><li>Trip indication</li></ul>

Series CA8 Contactors

The CA7 contactor series represents the most modern and flexible IEC power contactor available today. A wide selection of contactors covers the entire CA7 horsepower range (up to 75HP @ 460/575V). Six of the contactors are only 45mm wide, an extremely small footprint for such rugged performance.<ul><li>Same Small Size for Most DC Applications</li><li>Type 1 And Type 2 Coordination</li><li>Advanced Safety And Reliability Features</li><li>Modular Accessories Are Common To All Devices</li><li>Reversible Coil Provides Total Flexibility</li><li>Dual Power Terminals Speed Wiring</li><li>CA7 contactors meet IEC, UL and CSA standard requirements.</li><li>CAN7 contactors are UL Listed and rated in accordance with the requirements of NEMA standards publication ICS-2 (NEMA rated).</li><li>CNX contactors are standard CA7 contactors that have been tested, approved and labeled by UL for heating ventilation and air conditioning (HVAC) applications.</li><li>CAL7 Lighting Contactors are used to control a wide variety of lighting loads.</li><li>CA7Y2 hydraulic elevator wye-delta contactors are a special application that consists of a pair of mechanically</li></ul>

Series CA7 Contactors

Sprecher + Schuh’s CA9 contactor line combines the simple function of our popular CA7 series with the rugged performance demanded in this wide horsepower range. CA9 contactors offer a smaller footprint than traditional contactors in this size class.<ul><li>116…2650 A</li><li>AC or DC operation</li><li>UL508, IEC 60947</li><li>Up to 600V (UL) and 1000V (IEC)</li><li>Reversible coil terminations</li><li>Mechanical interlocks</li><li>Front or side mount auxiliary contacts</li><li>Compatible with electronic overload relay</li><li>PLC interface capable</li></ul>

Series CA9 Contactors

The 3rd generation CEP7 solid state overload relays offer superior motor protection with advanced features like:<ul><li>Selectable trip class and field-installable modules</li><li>A wide current adjustment range of 5:1</li><li>Robust, self-powered design with mechanical and electrical mounting</li><li>Self-sealed latching mechanism</li><li>Single- and three-phase compatibility in same device allows for reduction in inventory SKUs</li></ul>The basic concept of utilizing Application Specific Integrated Circuits (ASICs) results in an affordable solid state overload relay. This kind of versatility and accuracy was simply not possible with traditional bimetallic or eutectic alloy electromechanical overload relays. The CEP7 offers dramatically lower energy requirements that save money and reduce panel space. Check out these advanced features.Wide Current Adjustment RangeCEP7-1EF Advanced Model offers:<ul><li>Adaptive-mount Expansion Port provides for<ul><li>Ground fault / Jam</li><li>Remote Reset</li></ul></li><li>Allows for Intelli-button options</li></ul>Selectable Trip Class &amp; Reset ModesCEP7-1EE Basic<ul><li>Manual reset mode</li><li>Trip class 10 and 20 (dip switches)</li></ul>CEP7-1EF Advanced<ul><li>Selectable manual or auto-manual reset modes</li><li>Trip class 10...30 (selectable dial)</li></ul>Ideal for light to medium industry processes<ul><li>Pump and Fan motors</li><li>Sawmills</li><li>Mixers</li><li> Conveyors</li></ul>

CEP7 Solid State Overload Relays

Sprecher + Schuh's KT9 series of Motor Circuit Controllers are some of the most versatile and technologically advanced control products available today. These devices can be used in a variety of control schemes that reduce panel space, simplify installation and eliminate the need for more expensive equipment.<ul><li>Current-limiting short circuit protection</li><li>Class 10 thermal overload protection</li><li>Switching</li><li>Signaling</li></ul>The KTC9 has a fixed magnetic trip set at 18…22x the maximum value of the current adjustment range (as opposed to the KTA9s magnetic trip of approximately 14x adjustment range.) KTC9 are typically used in applications where nuisance tripping might occur, as with some high efficiency motors.The KTB9 is designed without a thermal trip element (i.e., current adjustment range). It should be selected for applications where a separate motor overload protection device is used, such as on CLE7 Three Component Starters. Magnetic trip is approximately 14x operational current for the KTB9 (approximately 13x for the KTB7-45H).<ul><li>IEC/EN 60947–2, IEC/EN 60947-4-1</li><li>UL 60947-4-1</li><li>CSA C22.2, No. 60947-4-1</li><li>CB Scheme</li><li>CCC</li><li>CE Marked</li><li>cULus Listed</li><li>EAC</li><li>Morocco</li><li>UKCA</li></ul>

Series KT9 Control and Protection to 45A

Sprecher + Schuh’s Ecombo starters are the compact alternative to larger and higher priced combination starters. Both models consist of a KT9 Motor Circuit Controller (cULus listed as a Type E, self-protected combination starter), assembled with a CA7 or CA8 contactor, which provides remote operation (Type E/F). Whether used as a standalone starter or in multi-motor starter applications, Ecombo starters save significant panel space and dollars over conventional combination starter alternatives.The Ecombo starter line covers motors to 40A (KT9) / 45A (KT7), while providing current limiting short circuit protection up to 65kA. Class 10 thermal overload protection is also assured with a very accurate current adjustment setting which is factory calibrated to the smallest and largest current the unit can handle. A “differential tripping” mechanism also provides accelerated tripping under single phase conditions. Ecombo starters may be selected as Type 2 Coordinated per IEC 60947-4-1, or UL Construction Type E or F.<ul><li>0.10…45A Thermal Trip</li><li>2.2…585A Magnetic Trip</li><li>1/2…30HP @460V AC</li><li>AC or DC</li></ul>

Series Ecombo Combination Controllers

Sprecher + Schuh's complete series of KT Motor Circuit Controllers are available in compact, enclosed models up to 40 HP (@575V). The KTA9 Motor Circuit Controller and the CLE and CX7 Series of Combination Starters are preassembled in a variety of HP sizes and configurations yet have a compact housing for lower overall costs. KTU9 Molded Case Circuit Breakers are also available in a variety of standard enclosures for onsite assembly or shipped ready to install.<ul><li>Non-metallic IP65 (watertight, dust tight)</li><li>Type 4/4X/12 (watertight, dust tight, corrosion resistant)</li><li>Explosion Proof (Class I, Group B,C, D and Class II, Group E, F, G)</li></ul>

Enclosed Motor Circuit Controllers and Molded Case Circuit Breakers

Series KT5 devices are UL listed as Manual Motor Controllers (with optional approvals for Suitable as Motor Disconnect and Suitable for use in Group Installation).Group motor installations eliminate the need for individual branch short circuit protective devices for each motor circuit, reducing panel space, installation &amp; wiring time, and costs.There is only one Branch Circuit Protective Device (BCPD) for the “Group”.These devices meet requirement of Motor Protective Switching Devices (MPSD) as per IEC 60947-4-1 and Circuit Beaker as per IEC 60947-2 standard for application outside of North America.<ul><li>Overload protection – trip class 10A</li><li>Phase loss sensitivity</li><li>Disconnect function</li><li>Suitable for three- and single-phase applications</li><li>UL group motor and IEC Type 1and Type 2</li><li>International certifications</li><li>Interrupting rating @400V up to 100 kA</li></ul>

KT5 Control and Protection to 32A

Each sub-series features integrated electronic coils that reduce energy consumption by up to 80%, provide surge protection, and allow operation across wide voltage ranges without coil changes. ABB also offers auxiliary contact blocks and accessories to enhance functionality

Motor Control & Protection