Servo Systems

200 W (1/4 HP) Geared Servo Motor, Rated Torque = 400 oz-in (2.87 N·m)

200 W (1/4 HP) Geared Servo Motor, Rated Torque = 1830 oz-in (12.9 N·m)

200 W (1/4 HP) Geared Servo Motor, Rated Torque = 400 oz-in (2.87 N·m)

400 W (1/2 HP) Geared Servo Motor, Rated Torque = 1610 oz-in (11.4 N·m)

400 W (1/2 HP) Geared Servo Motor, Rated Torque = 3640 oz-in (25.7 N·m)

400 W (1/2 HP) Geared Servo Motor, Rated Torque = 810 oz-in (5.72 N·m)

400 W (1/2 HP) Geared Servo Motor, Rated Torque = 1610 oz-in (11.4 N·m)

400 W (1/2 HP) Geared Servo Motor, Rated Torque = 3640 oz-in (25.7 N·m)

400 W (1/2 HP) Geared Servo Motor, Rated Torque = 810 oz-in (5.72 N·m)

Direct Drive Motor, DMN Series, 118mm Diameter, 45mm Height, Incremental Digital Encoder, Standard Coil, PTC Temperature Sensor, IP40 Rating, 30µm/30µm Axial/Radial Runouts, without Error Compensation, M17 Connector, Standard Positioning Pinhole, and

Direct Drive Motor, DMN Series, 180mm Diameter, 50mm Height, Incremental Digital Encoder, Standard Coil, PTC Temperature Sensor, IP40 Rating, 30µm/30µm Axial/Radial Runouts, without Error Compensation, M17 Connector, Standard Positioning Pinhole, and

ST-EJ6DC0A2 HE00EJ6DC300 E1 CN6 Control signal cable, Fieldbus servo drive, 36-pin, 3m with flying leads

Direct Drive Motor, DMN Series, 118mm Diameter, 45mm Height, Incremental Digital Encoder, Standard Coil, PTC Temperature Sensor, IP40 Rating, 30µm/30µm Axial/Radial Runouts, without Error Compensation, 0.3m Cable w/ AMP Connector, Standard Positioning P

Direct Drive Motor, DMN Series, 180mm Diameter, 50mm Height, Incremental Digital Encoder, Standard Coil, PTC Temperature Sensor, IP40 Rating, 30µm/30µm Axial/Radial Runouts, without Error Compensation, 0.3m Cable w/ AMP Connector, Standard Positioning P

Servo accessory, external dynamic brake resistor, 4 ohm

0.3 mA Leakage Current and 40 mA Leakage Current Input filter

External regeneration resistor, capacity: 60 W, 12 Ohm

Hiwin Direcdt Drive Motor Package

Hiwin Direct Drive Motor Package

100 W (1/8 HP) Geared Servo Motor, Rated Torque = 910 oz-in (6.44 N·m)