Popular Brands in { name }

Discover { name } at Proax - Canada's top automation distributor. Easy pick-up, fast shipping. Explore now.

Shop { name } Online

**Here are some possible reasons why:**
- You may’ve typed the wrong search term, such as a misspelled product name or special characters/symbols.
- We might not carry the product you're looking for

Please try refining your search by not using special characters.

**Are these not the issues? Feel free to contact us and we'll assist you as quickly as possible.**

Search

Omron

Phoenix Contact

Advantech

Oriental Motor

Curtis

Sprecher Schuh

Wittenstein

Hiwin

BHI62ST-50

200 W (1/4 HP) Induction Gear Motor (50:1 Gear Ratio)  (Three-Phase 200/220/230 VAC)

ACS35501U09A82

ACS180-04S-07A8-1

ACS180 Std Variant with STO and EMC R1 230V 1 PH 2 HP 7.4 A

<h3>25 W (1/30 HP) Washdown Gear Motor (36:1 Gear Ratio) (Single-Phase 110/115 VAC)</h3>The FPW Series washdown gear motors are watertight, dust-resistant geared induction motors which conform to IEC standard IP67.

FPW425A2-36U

25 W (1/30 HP) Washdown Gear Motor (36:1 Gear Ratio) (Single-Phase 110/115 VAC)

<h3>ELR H5-I-PT/500AC-3-IFS - Hybrid motor starter</h3><p>Networkable hybrid motor starter for reversing 3~ AC motors up to 500 V AC, output current: 3 A, adjustable overload shutdown, and Push-in connection, DIN rail connector provided.</p><ul><li>22.5 mm wide</li><li>Reduction in wiring</li><li>Space saving</li><li>Long service life</li><li>3-phase loop bridges</li><li>Adjustable current for bimetal function</li><li>Low-wear switching</li></ul>

2905146

ELR H5-I-PT/500AC-3-IFS - Networkable hybrid motor starter for reversing 3~ AC motors up to 500 V AC, output current: 3 A, adjustable overload shutdown, and Push-in connection, DIN rail connector provided.

<h3>Connection Cable (1.3 m)</h3>Standard connection cable for BXII Series Motor and Driver

CC013SBF2

<h3>3.54 in. (90 mm) 5-Phase Geared Stepper Motor (AC Input)</h3>The PKE series hybrid stepper motors are designed to provide high performance and energy savings. To achieve constant maximum torque output with lower heat generation and save energy, the motor losses have been substantially reduced allowing them to be operated for longer hours at high speed which is not possible with conventional stepper motors. For use with RKII Series Drivers.<ul><li>Constant Duty</li><li>Low Noise, Low Vibration</li></ul>

PKE596AC-TS10

3.54 in. (90 mm) 5-Phase Geared Stepper Motor (AC Input)

<h3>Brushless DC Motor</h3>Pinion shaft motor for use with a gearhead (sold separately). *Pinion Shaft not shown.

BLM6200SHP-GFV

R88A-CA1C010BFS-A

10 m Length High-Flexible Power/Brake Cable

<h3>GFS Gearhead Flat Hollow Shaft (15:1)</h3>Flat Hollow Shaft Gearhead for use with a wide variety of motors.

GFS5G15FR

<h3>120 W (1/6 HP) Brushless DC Motor</h3>The BLM Series features a a compact, high-power and high-efficiency brushless DC motor. The entire motor structure features our latest brushless DC motor technology and has been innovated in pursuit of the optimal performance. *Connection Cable Required.

BLM5120HP-100AS

<h3>Induction Motor</h3>The next generation KII Series offers higher strength gears that maximizes motor performance with ease of use wiring and mounting, all at affordable prices.<ul><li>Higher Permissible Torque</li><li>Long Life (Rated life 10,000 hours)</li><li>Low Noise</li><li>*Gearhead required</li></ul>

5IK100VGVR-ES

3G3MX2-A2022-V2

The PS-FBPA FIELDBUS PLUG Adapter is suitable for PSR(C), PSE and PSTX Softstarters.

PS-FBPA

5IK90GVR-UCT2

<h3>GN Gearhead Right-Angle Hollow Shaft (150:1)</h3>Right-Angle Hollow Shaft Gearheads for use with a wide variety of motors

4GN150RH

GN Gearhead Right-Angle Hollow Shaft (150:1)

<h3>GN Gearhead Right-Angle Hollow Shaft (180:1)</h3>Right-Angle Hollow Shaft Gearheads for use with a wide variety of motors.

4GN180RH

GN Gearhead Right-Angle Hollow Shaft (180:1)

The softstarter PSR37-600-70 has a rated maximum operational current of 37 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...240 V AC at 50/60 Hz. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN and a TOR signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

PSR37-600-70

PSR37-600-70 Softstarter - 37 A - 208 ... 600 V AC

The softstarter PSR60-600-70 has a rated maximum operational current of 60 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...240 V AC at 50/60 Hz. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN and a TOR signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

PSR60-600-70

PSR60-600-70 Softstarter - 60 A - 208 ... 600 V AC

R88A-CN101C

 Gearheads

 Brushless DC Motors

<p>Sprecher + Schuh offers a broad selection of pre-assembled or "build-from-stock" starters housed in a high impact, non-metallic, cUL approved, Type 1, 12, 4/4X enclosure. Built for convenience, space savings and economy, the KWIKstarter line is efficiently designed to use stock CA7/CAU7 contactors and advanced CEP7 solid state or CT7N thermal overloads. Contactor and overload are either prewired and pre-mounted onto the enclosure's built-in DIN-rail or may be ordered as separate components. Ample knockouts and open terminals guarantee quick, no fuss wiring.</p><p>KWIKstarters control motors up to 30HP @ 460V (30HP @ 575V) in two enclosure sizes measuring only 208 x 98mm (8.19" x 3.86") or 250 x 125mm (9.84” x 4.92”). This covers over 85% of industrial motor control applications in a very compact package that can be mounted adjacent to or directly on equipment.</p><p>KWIKstarters are available in UL sizes 9 to 43 amps, or NEMA labeled sizes 00, 0, 1 and 2. The enclosure and controls are designed for simplicity. A variety of control options and sizes make it a versatile off-the-shelf motor starter for a variety of common applications.</p><ul><li>cUL Approved</li><li>Type 1/12/4/4X</li><li>IP66</li><li>Up to 15 HP @ 600V AC</li><li>AC and DC</li><li>Single or 3-Phase</li><li>Start-Stop, Multi-Function, H-O-A, Reversing, E-Stop</li><li>IEC or NEMA labeled</li><li>125 x 125 x 250 mm (5 x 5 x 10 in) max.</li></ul>

KWIKstarters

<p>Sprecher + Schuh offers a complete line of combination and non-combination starters suitable for almost any HVAC/R application in the industry. Standard HVAC/R starters range from NEMA Size 00 up to NEMA size 3 (50HP @460V AC).</p><p>Sprecher + Schuh Fractional Manual Starters (FMS) consist of a snap switch combined with a thermal overload device operating on the solder-ratchet principle. To reset the overload mechanism, the switch lever is moved to the OFF position. The motor can be restarted by simply pushing the switch lever to the ON position. The switch is designed to prevent being held closed under a sustained motor overload.</p><p>Sprecher + Schuh NEMA labeled KWIKstarters are housed in a high impact, nonmetallic, cUL Approved, Type 1, 12, 4,</p><p>4X enclosure. Built for convenience, space savings and economy, KWIKstarters are efficiently designed to use stock CAN7 contactors and CEP7 or CT7N overloads. Contactor and overload are either pre-wired and pre-mounted onto the enclosure’s built-in DIN-rail or may be ordered as separate components. Ample knockouts and open terminals guarantee quick, no fuss wiring.</p><p>Standard starters include Non-combination, Fusible, Non-Fusible and Molded Case Circuit Breaker disconnects. All sizes are available in metallic Type 1 General Purpose or Type 3R Outdoor Rain tight enclosures. Three-phase and Single-Phase styles are available. An additional factory assembled option is the fireman damper interface, especially designed for meeting the needs of building and contractor specifications for shut down control.</p><ul><li>Features and Spec bullets</li></ul>

FMS & NEMA Labeled Starters

<p>Sprecher + Schuh non-combination magnetic motor starters are intended to eliminate the purchase and assembly of a separate contactor, overload relay and associated wiring. When purchased with an enclosure, the starters are mounted and ready to install on receipt.</p><p>At the heart of all magnetic starters is the Sprecher + Schuh CAT7 and CAT9 line of motor starters. These starters are compact and offer intermediate sizes to better match specific motor requirements. This equates to generous wiring space and less wasted horsepower capacity.</p><p>Magnetic starters are equipped with Sprecher + Schuh's CEP7 solid state overload relay as a standard selection. Unlike traditional overload relays that indirectly sense motor current through heater elements, CEP7 solid state overload relays measure motor current directly through integrated current transformers and on-board electronics. The electronics provide numerous advantages over electromechanical relays.</p><ul><li>cUL Approved</li><li>CE, CSA</li><li>Type 1/12/4/4X</li><li>Up to 900 HP @ 600V AC</li><li>AC and DC</li><li>Single or 3-Phase</li><li>Forward and Reversing</li><li>IEC or NEMA labeled</li><li>Many cover control types available</li></ul>

Non-Combination Starters

<p>Sprecher + Schuh's through-the-door operated combination starters represent an economical alternative to the classic flange-operated solution. They are designed to meet rigid UL/NEC withstand specifications. Sprecher + Schuh has been building custom control panels with this design for years. Experience the durability of this product!</p><p>At the heart of all Sprecher + Schuh combination starters is the CAT7 and CAT9 line of motor starters. These starters are compact and offer intermediate sizes to better match specific motor requirements. This equates to generous wiring space and less wasted horsepower capacity.</p><p>Standard Sprecher + Schuh combination starters are equipped with the state of the art CEP7 solid state overload relay. CEP7 solid state overload relays measure motor current directly through integrated current transformers and on-board electronics (ASICs). The electronics provide numerous advantages over electromechanical relays such as increased accuracy, a wider adjustment range, lower energy usage, and less heat generation which requires less cooling.</p><ul><li>Lockout/Tagout accessories</li><li>Quick make/quick break, non-teasing action</li><li>Suitable for interrupting up to 200,000 amperes when class "J" fuses are used</li><li>UL98 standards for service entrance requirements</li><li>NFPA 79</li><li>cUL, CE, CSA</li><li>Type 1/12/4/4X or 3R</li><li>Up to 500 HP @ 600V AC</li><li>AC and DC</li><li>Forward and Reversing</li><li>IEC or NEMA labeled</li><li>Many cover control types available</li></ul>

Combination Starters

<p>All standard Sprecher + Schuh starters use the CAT7 or CAT9 line of motor starters. These starters are compact and offer intermediate sizes to better match specific motor requirements. This equates to generous wiring space and less wasted horsepower capacity. Protecting these specialty starters is the state of the art CEP7 solid state overload relay. The CEP7 electronics provide numerous advantages over electromechanical relays such as increased accuracy, a wider adjustment range, lower energy usage, and less heat generation which requires less cooling.</p><ul><li>Contactor (with AC coil)</li><li>Overload relay protection</li><li>Thermal magnetic circuit breaker</li><li>J-Type Fuses</li><li>Selection of cover controls</li><li>Enclosures Type 1, 4, 4X, 12, 3R</li><li>Oversized back pan for plenty of wiring space</li><li>UL approved</li></ul>

RVAT, Multi-Speed & Pump

<p>The PF Softstarter Controller provides intelligence, unmatched performance, flexibility, and diagnostics in a modular compact design for controlling either a standard squirrel-cage induction motor or a star-delta motor. Seven standard, and two optional starting modes of operation are available within a single controller.</p><p>As standard, this true three-phase controlling device includes electronic overload protection with programmable trip class, integral run bypass, increased motor and system diagnostics, configurable auxiliary contacts, and multiple start and stop modes. The PF Controller comes equipped with a built-in keypad and LCD display for programming the controller parameter settings for the specific industrial application.</p><p>Three starting modes</p><ul><li>PFS Standard</li><li>PFB Pump Control</li><li>PFD Braking Control</li></ul><ul><li>16 Current Models</li><li>Control Voltage: 120-240VAC or 24V AC/DC</li><li>Voltage Range: 200...600VAC 3...400HP @460VAC</li><li>Standard 3-wire or Y-Delta motor connections</li><li>Built-in Bypass Contactor</li><li>Built-in Electronic Motor Overload Protection</li></ul>

Series PF Softstarters

<p><strong>ACS580 Drives Key Features:</strong></p><ul><li><p><strong>All-in-One Design</strong>: Comes with built-in features and components, reducing the need for external devices and simplifying installation.</p></li><li><p><strong>Easy to Use</strong>: Intuitive user interface with startup assistants and a simple menu structure for quick commissioning and operation.</p></li><li><p><strong>Versatile Applications</strong>: Suitable for both variable and constant torque loads like pumps, fans, conveyors, mixers, and compressors.</p></li><li><p><strong>Energy Efficiency</strong>: Includes features like an energy optimizer to improve efficiency and reduce electricity consumption.</p></li><li><p><strong>Safety First</strong>: Integrated safety functions such as Safe Torque Off (SIL 3) ensure machine and personnel safety.</p></li></ul><h3>Technical Highlights:</h3><ul><li><p><strong>Power Range</strong>: 0.75 kW to 500 kW</p></li><li><p><strong>Voltage Range</strong>: 200 V to 480 V</p></li><li><p><strong>Enclosures Available</strong>: IP00, IP20, IP21, IP42, IP54, IP55</p></li><li><p><strong>Communication &amp; Compatibility</strong>: Part of ABB’s “all-compatible” drive family with consistent interface and architecture for easy integration.</p></li></ul>

Motor & Drives