Popular Brands in { name }

Discover { name } at Proax - Canada's top automation distributor. Easy pick-up, fast shipping. Explore now.

Shop { name } Online

**Here are some possible reasons why:**
- You may’ve typed the wrong search term, such as a misspelled product name or special characters/symbols.
- We might not carry the product you're looking for

Please try refining your search by not using special characters.

**Are these not the issues? Feel free to contact us and we'll assist you as quickly as possible.**

Search

Omron

Phoenix Contact

Advantech

Oriental Motor

Curtis

Sprecher Schuh

Wittenstein

Hiwin

R88A-FI1S103

1S Servo RFI filter; 230 VAC single-phase, for 100 and 200 W drives

R88M-1L2K030T-S2

1S AC servo motor, 2 kW, 230 VAC, 3000 rpm, 6.37 Nm, absolute encoder

<h3>Brushless DC Motor Driver (Single-Phase, Three-Phase 200-240 VAC)</h3>BLE2 Series Driver

BLE2D60-C

Brushless DC Motor Driver (Single-Phase, Three-Phase 200-240 VAC)

ACS800-04-0205-5

ACS800-04-0205-5 Pcont.max:160kW, Icont.max:260A

R88M-1M1K520T-S2

1S AC servo motor, 1.5 kW, 230 VAC, 2000 rpm, 7.16 Nm, absolute encoder

20m-Cable-Kit

Includes:
1pc CMCC0-200-01
1pc CEIBB-200-000

The softstarter PSE72-600-70 has a rated maximum operational current of 72 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general pur­pose softstarter. It’s a perfect balance be­tween high starting capacity and cost effi­ciency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.

PSE72-600-70

PSE72-600-70 Softstarter - 72 A - 208 ... 600 V AC

ACS35503U24A42

R88D-KN10H-ECT

G5 Series servo drive, EtherCAT type, 1000 W, 1~ 200 VAC

The ACS355 drives are designed to meet the requirements of an extensive range of machinery applications in food and beverage, material handling, lifting, textile, printing, rubber and plastics, and woodworking applications. The drive is user-friendly, yet it provides a wide range of built-in technology such as the safe torque off functionality and sequence programming, reducing the need for additional control electronics. The product offers options and diverse functionality to cater to the needs set for speed and torque control of AC induction and permanent magnet motors.

ACS355-03U-23A1-4

LV AC Machinery Drive Module, 480 V (ACS355-03U-23A1-4)

ACS580-01-062A-6+B056

R88M-K40030H-S2

G5 series AC servo motor, 400 W, 200 VAC, 3000 rpm, 1.3 Nm, Incremental encoder

XW2Z-100J-B24

General Purpose servo terminal block cable, 1 m

The softstarter PSR6-600-70 has a rated maximum operational current of 6 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...240 V AC at 50/60 Hz. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

PSR6-600-70

PSR6-600-70 Softstarter - 6.8 A - 208 ... 600 V AC

<h3>GN Gearhead Parallel Shaft (30:1)</h3>Parallel Shaft Gearhead for use with a wide variety of motors.

5GN30KA

<h3>Brushless DC Motor Driver (Single-Phase 100-120 VAC)</h3>BMU Series Driver Design Change effective January 2015. See Downloads for details and confirm your part number before ordering.

BMUD30-A2

Brushless DC Motor Driver (Single-Phase 100-120 VAC)

<h3>Brother Gearmotor G3 High Torque AC Gear Motor with Brake</h3>Compact, light-weight gearmotors providing high-torque and high-reliability. These gearmotors feature helical gears that can transfer higher loads at greater speeds due to the gradual engagement of the teeth and smooth transfer of the load.<ul><li>Class F Insulation, Inverter Duty</li><li>Brake Motor</li><li>Long Life</li><li>Mount in Any Direction</li><li>Terminal Box Jumpers included</li></ul> *Rectifier Included

G3L50N50-MB22TAVEB4

Brother Gearmotor G3 High Torque AC Gear Motor with Brake

ACS8800104A62+0000

The wall-mounted ACS580-01 is available as UL Type 1 (IP21), Type 12 (IP55) and Type 4X (IP66) designed for OEM and end users who value high quality and robustness in their applications. Coated control boards, high enclosure classes, and motor temperature monitoring ensure processes will run smoothly even in harsh conditions. This drive is part of ABB’s all-compatible drives portfolio, sharing the same control panel, PC tools, parameter structure and communications options as the ACS380/180 and ACS880.  Learn it once; use it everywhere.  With both V/Hz and sensorless vector control supporting most motor types such as induction, permanent magnet, synchronous reluctance, and optimum pole motors the ACS580 is ideal for use on compressors, conveyors, pumps, extruders, centrifuges, mixers, fans and other variable and constant torque applications, in a variety of industries, including food and beverage, plastic, textile, material handling, and agriculture.

ACS580-01-04A8-4

LV AC general purpose wall-mounted drive, UL: Pld 3 Hp, 4.8 A, 500 V (ACS580-01-04A8-4)

3G3MX2-A2004-V1

3.0 A Torque Current and 3/4 hp Variable Torque Power Alternate Current (AC) Drive

 Gearheads

 Brushless DC Motors

Sprecher + Schuh offers a broad selection of pre-assembled or "build-from-stock" starters housed in a high impact, non-metallic, cUL approved, Type 1, 12, 4/4X enclosure. Built for convenience, space savings and economy, the KWIKstarter line is efficiently designed to use stock CA7/CAU7 contactors and advanced CEP7 solid state or CT7N thermal overloads. Contactor and overload are either prewired and pre-mounted onto the enclosure's built-in DIN-rail or may be ordered as separate components. Ample knockouts and open terminals guarantee quick, no fuss wiring.KWIKstarters control motors up to 30HP @ 460V (30HP @ 575V) in two enclosure sizes measuring only 208 x 98mm (8.19" x 3.86") or 250 x 125mm (9.84” x 4.92”). This covers over 85% of industrial motor control applications in a very compact package that can be mounted adjacent to or directly on equipment.KWIKstarters are available in UL sizes 9 to 43 amps, or NEMA labeled sizes 00, 0, 1 and 2. The enclosure and controls are designed for simplicity. A variety of control options and sizes make it a versatile off-the-shelf motor starter for a variety of common applications.<ul><li>cUL Approved</li><li>Type 1/12/4/4X</li><li>IP66</li><li>Up to 15 HP @ 600V AC</li><li>AC and DC</li><li>Single or 3-Phase</li><li>Start-Stop, Multi-Function, H-O-A, Reversing, E-Stop</li><li>IEC or NEMA labeled</li><li>125 x 125 x 250 mm (5 x 5 x 10 in) max.</li></ul>

KWIKstarters

Sprecher + Schuh offers a complete line of combination and non-combination starters suitable for almost any HVAC/R application in the industry. Standard HVAC/R starters range from NEMA Size 00 up to NEMA size 3 (50HP @460V AC).Sprecher + Schuh Fractional Manual Starters (FMS) consist of a snap switch combined with a thermal overload device operating on the solder-ratchet principle. To reset the overload mechanism, the switch lever is moved to the OFF position. The motor can be restarted by simply pushing the switch lever to the ON position. The switch is designed to prevent being held closed under a sustained motor overload.Sprecher + Schuh NEMA labeled KWIKstarters are housed in a high impact, nonmetallic, cUL Approved, Type 1, 12, 4,4X enclosure. Built for convenience, space savings and economy, KWIKstarters are efficiently designed to use stock CAN7 contactors and CEP7 or CT7N overloads. Contactor and overload are either pre-wired and pre-mounted onto the enclosure’s built-in DIN-rail or may be ordered as separate components. Ample knockouts and open terminals guarantee quick, no fuss wiring.Standard starters include Non-combination, Fusible, Non-Fusible and Molded Case Circuit Breaker disconnects. All sizes are available in metallic Type 1 General Purpose or Type 3R Outdoor Rain tight enclosures. Three-phase and Single-Phase styles are available. An additional factory assembled option is the fireman damper interface, especially designed for meeting the needs of building and contractor specifications for shut down control.<ul><li>Features and Spec bullets</li></ul>

FMS & NEMA Labeled Starters

Sprecher + Schuh non-combination magnetic motor starters are intended to eliminate the purchase and assembly of a separate contactor, overload relay and associated wiring. When purchased with an enclosure, the starters are mounted and ready to install on receipt.At the heart of all magnetic starters is the Sprecher + Schuh CAT7 and CAT9 line of motor starters. These starters are compact and offer intermediate sizes to better match specific motor requirements. This equates to generous wiring space and less wasted horsepower capacity.Magnetic starters are equipped with Sprecher + Schuh's CEP7 solid state overload relay as a standard selection. Unlike traditional overload relays that indirectly sense motor current through heater elements, CEP7 solid state overload relays measure motor current directly through integrated current transformers and on-board electronics. The electronics provide numerous advantages over electromechanical relays.<ul><li>cUL Approved</li><li>CE, CSA</li><li>Type 1/12/4/4X</li><li>Up to 900 HP @ 600V AC</li><li>AC and DC</li><li>Single or 3-Phase</li><li>Forward and Reversing</li><li>IEC or NEMA labeled</li><li>Many cover control types available</li></ul>

Non-Combination Starters

Sprecher + Schuh's through-the-door operated combination starters represent an economical alternative to the classic flange-operated solution. They are designed to meet rigid UL/NEC withstand specifications. Sprecher + Schuh has been building custom control panels with this design for years. Experience the durability of this product!At the heart of all Sprecher + Schuh combination starters is the CAT7 and CAT9 line of motor starters. These starters are compact and offer intermediate sizes to better match specific motor requirements. This equates to generous wiring space and less wasted horsepower capacity.Standard Sprecher + Schuh combination starters are equipped with the state of the art CEP7 solid state overload relay. CEP7 solid state overload relays measure motor current directly through integrated current transformers and on-board electronics (ASICs). The electronics provide numerous advantages over electromechanical relays such as increased accuracy, a wider adjustment range, lower energy usage, and less heat generation which requires less cooling.<ul><li>Lockout/Tagout accessories</li><li>Quick make/quick break, non-teasing action</li><li>Suitable for interrupting up to 200,000 amperes when class "J" fuses are used</li><li>UL98 standards for service entrance requirements</li><li>NFPA 79</li><li>cUL, CE, CSA</li><li>Type 1/12/4/4X or 3R</li><li>Up to 500 HP @ 600V AC</li><li>AC and DC</li><li>Forward and Reversing</li><li>IEC or NEMA labeled</li><li>Many cover control types available</li></ul>

Combination Starters

All standard Sprecher + Schuh starters use the CAT7 or CAT9 line of motor starters. These starters are compact and offer intermediate sizes to better match specific motor requirements. This equates to generous wiring space and less wasted horsepower capacity. Protecting these specialty starters is the state of the art CEP7 solid state overload relay. The CEP7 electronics provide numerous advantages over electromechanical relays such as increased accuracy, a wider adjustment range, lower energy usage, and less heat generation which requires less cooling.<ul><li>Contactor (with AC coil)</li><li>Overload relay protection</li><li>Thermal magnetic circuit breaker</li><li>J-Type Fuses</li><li>Selection of cover controls</li><li>Enclosures Type 1, 4, 4X, 12, 3R</li><li>Oversized back pan for plenty of wiring space</li><li>UL approved</li></ul>

RVAT, Multi-Speed & Pump

The PF Softstarter Controller provides intelligence, unmatched performance, flexibility, and diagnostics in a modular compact design for controlling either a standard squirrel-cage induction motor or a star-delta motor. Seven standard, and two optional starting modes of operation are available within a single controller.As standard, this true three-phase controlling device includes electronic overload protection with programmable trip class, integral run bypass, increased motor and system diagnostics, configurable auxiliary contacts, and multiple start and stop modes. The PF Controller comes equipped with a built-in keypad and LCD display for programming the controller parameter settings for the specific industrial application.Three starting modes<ul><li>PFS Standard</li><li>PFB Pump Control</li><li>PFD Braking Control</li></ul><ul><li>16 Current Models</li><li>Control Voltage: 120-240VAC or 24V AC/DC</li><li>Voltage Range: 200...600VAC 3...400HP @460VAC</li><li>Standard 3-wire or Y-Delta motor connections</li><li>Built-in Bypass Contactor</li><li>Built-in Electronic Motor Overload Protection</li></ul>

Series PF Softstarters

ACS580 Drives Key Features:<ul><li>All-in-One Design: Comes with built-in features and components, reducing the need for external devices and simplifying installation.</li><li>Easy to Use: Intuitive user interface with startup assistants and a simple menu structure for quick commissioning and operation.</li><li>Versatile Applications: Suitable for both variable and constant torque loads like pumps, fans, conveyors, mixers, and compressors.</li><li>Energy Efficiency: Includes features like an energy optimizer to improve efficiency and reduce electricity consumption.</li><li>Safety First: Integrated safety functions such as Safe Torque Off (SIL 3) ensure machine and personnel safety.</li></ul><h3>Technical Highlights:</h3><ul><li>Power Range: 0.75 kW to 500 kW</li><li>Voltage Range: 200 V to 480 V</li><li>Enclosures Available: IP00, IP20, IP21, IP42, IP54, IP55</li><li>Communication &amp; Compatibility: Part of ABB’s “all-compatible” drive family with consistent interface and architecture for easy integration.</li></ul>

Motor & Drives