Moteurs et Variateurs de fréquences

Filtre d'entrée

Servomoteur rotatif de la série 1S d'une capacité de 2 kW

Brushless DC Motor Driver (Single-Phase, Three-Phase 200-240 VAC)

ACS800-04-0205-5 Pcont.max:160kW, Icont.max:260A

Série 1S Servomoteur rotatif d'une capacité de 1,5 kW

Includes: 1pc CMCC0-200-01 1pc CEIBB-200-000

The softstarter PSE72-600-70 has a rated maximum operational current of 72 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general pur­pose softstarter. It’s a perfect balance be­tween high starting capacity and cost effi­ciency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.

DRIVE ACS355, 7.5HP, 230/3/60

Série G5 Servo Drive EtherCAT d'une capacité de 1 kW

LV AC Machinery Drive Module, 480 V (ACS355-03U-23A1-4)

ACS580 600V 50HP Heavy duty NEMA 12

Servomoteur rotatif de la série G5 d'une capacité de 400 W

Câble de bornier de 1 m de long

The softstarter PSR6-600-70 has a rated maximum operational current of 6 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...240 V AC at 50/60 Hz. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

GN Gearhead Parallel Shaft (30:1)

Brushless DC Motor Driver (Single-Phase 100-120 VAC)

Brother Gearmotor G3 High Torque AC Gear Motor with Brake

Drive 3/4HP,240V

LV AC general purpose wall-mounted drive, UL: Pld 3 Hp, 4.8 A, 500 V (ACS580-01-04A8-4)

Entraînement à courant alternatif de 3,0 A et à couple variable de 3/4 hp