Moteurs et Variateurs de fréquences

Drive 100HP 690V Heavy Duty + Firmware Winder

Série 1S Servomoteur rotatif d'une capacité de 100 W

Entraînement à courant alternatif de 3,0 A et à couple variable de 3/4 hp

LV AC drive module for pumps and fans, IEC: Pn 1 Hp, 4.7 A (ACS310-01U-04A7-2)

ACS880 600V 250HPld/200HPhd

LV AC Machinery Drive Module, 230 V (ACS355-01U-04A7-2)

ACS880 Drive, 1 HP, 480V, 3Amps heavy duty drive complete with keypad.

Cooling fan suitable for PSR3…PSR45

Metal Connection Cable (F Type - Toward Shaft Outlet), 10 m

1S AC servo motor, 11 kW, 400 VAC, 1500 rpm, 70.0 Nm, absolute encoder

DC choke 18,5-22 kW DCL-02

Conduire

ACS880-01-021A-5+N5000, ACS880 480V 3Ph VFD 21A

ACS88001014A5+0000

200 W (1/4 HP) Three-Phase AC Motor with Right-Angle Hollow Shaft Gearhead (30:1 Gear Ratio)

Metal Connection Cable (F Type - Toward Shaft Outlet), 7 m

Filtre d'entrée

LV AC Machinery Drive Module, 230 V (ACS355-03U-06A7-2)

The softstarter PSE45-600-70 has a rated maximum operational current of 45 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general pur­pose softstarter. It’s a perfect balance be­tween high starting capacity and cost effi­ciency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.

100 W (1/8 HP) Induction Right-Angle Gear Motor (30:1 Gear Ratio, Three-Phase 220/230 VAC)