Moteurs et Variateurs de fréquences

Servomoteur rotatif de la série 1S d'une capacité de 2 kW

120 W (1/6 HP) Brushless DC Motor

ACS880-01-035A-7+B056+E200+D150+Q973, VFD ACS880, 600 VAC, 30 hp, avec options: boîtier NEMA 12/IP55, filtre intégré, chopper de frein, carte de sécurité FSO-12

The softstarter PSR16-600-70 has a rated maximum operational current of 16 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...240 V AC at 50/60 Hz. PSR features a two-phase control soft start and stop through a voltage ramp. It has built-in bypass for easy installation and energy saving. A RUN signal is available from a relay output in NO (normally open state). The start/stop ramp and time is easy to set by three potentiometers on the front. PSR is often used in combination with a manual motor starter (MMS) from ABB, so mechanical connection kits are available. Another popular option is Fieldbus communication, which can be enabled by an external adaptor and a Fieldbus plug. The PSR range is our most compact softstarters with basic functionality and values. They are suitable for small three-phase motors with nominal currents from 3...105 A and can manage up to 100 starts per hour. Common applications are, for example, pumps, fans, compressors, and conveyors.

Adapter Plate: 20078617 CP 015 - Standard, Motor Mounting Interface, 1-stage, 10:1, Keyed Output Shaft, Clamping Hub Diameter: 14mm, Standard Backlash Reference PO# 31765

Série 1S Servomoteur rotatif d'une capacité de 1 kW

ACS580 600V 100HPld/75HPhd; Nema 12

ACS880 480V 300HPld/250HPhd+BC

Induction Motor

The softstarter PSE85-600-70 has a rated maximum operational current of 85 A with an operating voltage span from 208...600 V AC. The rated control voltage is between 100...250 V AC at 50/60 Hz. PSE features a two-phase control with a soft start and stop through a voltage or a torque ramp. It has built-in bypass for easy installation and energy saving. A RUN, TOR, and Event signal is available from a relay output in NO (normally open state). The PSE has functions such as current limit, kickstart, analog output, EOL, underload, and locked rotor protection. To interact with PSE, it has an Illuminated display that uses symbols to become language neutral. As an option, you can add an identical external keypad with a rating of IP66. There are three ways to communicate with PSE. It can be done by hardwire inputs Start/Stop or by Reset of fault. Another popular option is the built-in fieldbus communication Modbus RTU. You can also use an external adaptor and a Fieldbus plug. PSE is a true general pur­pose softstarter. It’s a perfect balance be­tween high starting capacity and cost effi­ciency. Very suitable for small to medium-sized three-phase motors with nominal currents from 18...370 A. Typical applications are, for example, pumps, fans, compressors, and conveyors.

Brushless DC Motor Analog Driver (24 VDC)

Série 1S Servomoteur rotatif d'une capacité de 1 kW

AZ Series Driver with Built-in Controller (Stored Data) (24/48 VDC)

ACS880 480V 100HPld/75HPhd+BC

Série 1S Servomoteur rotatif d'une capacité de 1,5 kW

LV AC Machinery Drive Module, 480 V (ACS355-03U-44A0-4)

ACS880 600V 300HPld/250HPhd

Câble d'alimentation/frein haute flexibilité de 15 m de long

Entraînement à courant alternatif de 5,5 A et à couple variable de 4 hp

Démarreur moteur hybride pour l'inversion de moteurs AC triphasés jusqu'à 500 V AC et intensité de sortie 2,4 A avec tension de commande 24 V DC, coupure de surcharge réglable, fonction d'arrêt d'urgence jusqu'à SIL 3 / PL e et raccordement Push-in