Measurement & Monitoring

PACT RCP-4000A-UIRO-D140 - Set consisting of a 4-way signal conditioner with screw connection technology and a Rogowski coil 450 mm in length/140 mm in diameter for AC current measurement on busbars and power lines.The signal conditioner outputs 8 different standard signals on the output side and has one switching output.

PACT RCP-4000A-UIRO-D190 - Set consisting of a 4-way signal conditioner with screw connection technology and a Rogowski coil 600 mm in length/190 mm in diameter for AC current measurement on busbars and power lines.The signal conditioner outputs 8 different standard signals on the output side and has one switching output.

PACT RCP-4000A-UIRO-PT-D190 - Set consisting of a 4-way signal conditioner with push-in connection technology and a Rogowski coil 600 mm in length/190 mm in diameter for AC current measurement on busbars and power lines.The signal conditioner outputs 8 different standard signals on the output side and has one switching output.

String combiner box (SCB) - SOL-SC-2ST-0-DC-4MPPT-1001SE

Temp. controller, PROplus, 1/4 DIN, (96 x 96)mm,Pos. Prop. Control,2 x Aux OUT,Event I/P & Transf. OUT,option unit,Terminal cov.,100 to 240V AC

Temp. controller, PROplus, 1/4 DIN, (96 x 96)mm,Pos. Prop. Control,2 x Aux OUT,2 Event I/Ps,option unit,Terminal cov.,100-240V AC

200 ºC Operating Temperature [Max] Analog-Set 1/16 DIN Temperature Controller

24 V Alternating Current (AC)/Direct Current (DC) Supply Voltage Frequency/Rate Meter

Transparent cover - MINI MCR DKL

Temperature measuring transducer - MACX MCR-T-UI-UP-SP

MCR-TTL-RS232-E - Software adapter cable (Stereo jack connector/D-SUB 25-pos.), 1.2 m length, for programming MCR-T-..., MCR-S-... and MCR-f-... modules

MACX MCR-SL-NAM-R - NAMUR signal conditioners for operating proximity sensors and switches. The signals are transmitted to the control level via relay output (changeover contact). Line fault detection (LFD), 3-way electrical isolation, SIL 2, with screw connection.

MACX MCR-SL-NAM-R-SP - NAMUR signal conditioner for operating proximity sensors and switches. The signals are transmitted to the control level via relay output (changeover contact). Line fault detection (LFD), 3-way electrical isolation, SIL 2, with Push-in connection.

8-Ch AI Module w/ Modbus

8-Ch Thermocouple Input Module w/ Modbus

8-Channel Universal Analog Input Module

CM-TCS.21S Temperature monitoring relay Temp.-range -50...+50°C, 24VAC/DC

CM-TCS.23S Temperature monitoring relay Temp.-range 0...+200°C, 24VAC/DC

CM-TCS.11P Temperature monitoring relay Temp.-range -50...+50°C, 24-240VAC/DC

CM-TCS.21P Temperature monitoring relay Temp.-range -50...+50°C, 24VAC/DC