Popular Brands in { name }

Discover { name } at Proax - Canada's top automation distributor. Easy pick-up, fast shipping. Explore now.

Shop { name } Online

**Here are some possible reasons why:**
- You may’ve typed the wrong search term, such as a misspelled product name or special characters/symbols.
- We might not carry the product you're looking for

Please try refining your search by not using special characters.

**Are these not the issues? Feel free to contact us and we'll assist you as quickly as possible.**

Search

Type

Edge Sensor

Universal Safety Mat

Trim Kit

Safety Mat Controllers

Cascadable Basic Type Light Curtain

Basic Type Light Curtain

Universal Safety Mat Normally Open Single Pole Single Throw (SPST), 4-Wire

Cascading Segment Light Curtain

Standard Type Light Curtain

Cascadable Advanced Type Light Curtain

Cascadable Standard Type Light Curtain

Spatter Protection Cover

Advanced Type Light Curtain

Enclosure

Water-Resistant Case

Emergency Stop Switch

Weld Shield Cover

Weld Spatter Protection Cover

Switch

Omron

Phoenix Contact

HellermannTyton

Fortress Safety

Tina 1A blind plug is connected to the unused M12 connectors of the connection blocks Tina 4A or Tina 8A. M12-5 male connector.

The Tina devices adapt the DYNlink safety circuit in Vital, Pluto and B&R X20 to safety components with mechanical contacts, such as E-stops, switches and light beams/curtains with dual outputs.

Tina is available in several versions depending on the type of safety component that is connected to the Vital, Pluto or B&R X20 circuit.

Tina 1A

Omron F39SGLP (F39-SGLP) lamp unitThe lamp can be connected to emitter, receiver, or emitter/receiver and turned ON based on the operation of F3SG-SR/PG. The lamp can indicate red, orange, and green colors, to which three different states can be assigned. IP67 * rated when mated. The Lamp does not support Bluetooth communication.<ul><li>Safety sensor accessory for F3SG-SR/PG,</li><li>(2 cables per set, for emitter and receiver)</li><li>IP67, IP67G</li><li>PVC Jacket</li></ul>

F39-SGLP

The lamp can be connected to emitter, receiver, or emitter/receiver and turned ON based onthe operation of F3SG-SR/PG.The lamp can indicate red, orange, and green colors, to which three different states can beassigned. IP67 * rated when mated.

Tina 4A is a connection block for series connection of up to four DYNlink devices. Four M12-5 female connectors for the sensors are available on the device. The information signal of each device can be wired separately. The cable used for the connection to the Tina 4A should have a diameter 7 - 12 mm. Unused M12-connectors on Tina 4A must be equipped with Tina 1A blind plugs.

The Tina devices adapt the DYNlink safety circuit in Vital, Pluto and B&R X20 to safety components with mechanical contacts, such as E-stops, switches and light beams/curtains with dual outputs.

Tina is available in several versions depending on the type of safety component that is connected to the Vital, Pluto or B&R X20 circuit.

Tina 4A

44506-0730

Emergency stop button in Smile enclosure, Tina adaptation unit to DYNlink included, Status LED in button, 1 x M12-5 male connector.

Smile 11 EA Tina

Cable Tie, 8&quot; Long, UL Rated, 50lb Tensile Strength, PA66, Natural, 1000/pkg<ul><li>Engineered and manufactured for maximum performance and quality.</li><li>Made from 100% high-quality plastic to ensure efficient recycling.</li><li>Inside serration for a strong grip onto bundles.</li><li>Easy application either manually or with a tensioning tool.</li><li>Bent tail allows for simpler insertion.</li></ul>

T50R9M4

F39-JG10B-L

Safety sensor accessory, F3SG-R Advanced, emitter extension cable M12 5-pin, male/female, 10 m

F3SJ-A1025P20

1025 mm Protected Height Cascadable Advanced Type Light Curtain

F3SG-4RE0590P30

Safety Sensor, F3SG-R Easy, Type 4, 30 mm resolution, range 0.3 to 20.0 m, height 590 mm, PNP

Identifier, read only, for assigning an address to the Pluto it is connected to. Each Pluto connected to the Pluto safety bus needs an IDFIX. The IDFIX number is fixed at delivery.

IDFIX is an identifier circuit which gives each Pluto an address on the bus. It contains an identification code which can be read by the system. The identification code is declared in the PLC program so that the correct part of the PLC program is executed by each specific Pluto. The use of IDFIX is mandatory in a multi-Pluto project, but voluntary if a unit works alone. If one Pluto in a multi-Pluto project needs to be replaced it is possible to let the new Pluto selfload the PLC program from another Pluto on the bus. The IDFIX will ensure that the new Pluto has the correct address on the bus.

IDFIX-R

40588-0023

15 m Warning Operating Range Safety Laser Scanner

F3SG-4RA1550-30

Safety Sensor, F3SG-R Advanced, Type 4, 30 mm resolution, range 0.3 to 20.0 m, height 1550 mm, PNP/NPN

44506-2705

G9SP-N10D

G9SP Standalone Safety controller, 10 safety input, 16 safety output, 6 test output. PNP

F39-JGR2W

Safety Sensor Accessory, F3SG-RA Advanced, cascading cable set (2pcs.) for emitter and receiver

F3SG-4SRB0280-85

Safety Light Curtain, F3SG-SRB Standard, Type 4, 85 mm resolution, range 0.3 to 20.0 m, height 280 mm, PNP/NPN

Gateway for 2-way communication between the Pluto bus and Ethernet. Ethernet protocol Modbus TCP.

With the use of a Gateway device, Pluto can communicate with other control systems and thereby form a part of a larger network. The unit has a common interface with Pluto, i.e. the same cabling and the Pluto Manager software can be used for servicing and where necessary programming.

GATE-MT

WS02-G9SP01-V2

G9SP Configurator, 1 license, WIN-2000/XP/Vista.

Omron F39JG7AL (F39-JG7A-L) Emitter Cable<ul><li>Cable Length: 7m</li><li>For emitter</li><li>M12 connector (5-pin),</li><li>5 wires</li><li>Color: Gray</li></ul>

F39-JG7A-L

Safety sensor accessory, F3SG-R Advanced, emitter cable M12 5-pin, female, 7 m

Omron F3SG4SRB060025F safety light curtain covers all aspects from design through to maintenance with global safety standards and a wide range of functionality. The high-power optical system provides stable detection up to 20 m even in harsh environments.&nbsp;F3SG-4SRB0600-25F also can be used automotive and machine tools industries (Harsh climates or conditions), cold storage warehousing such as -30&deg;C &amp; -22&deg;F working environments, cutting and metalworking processes environments and many more.&nbsp;&bull; Protection Height: 600mm/24" &bull; Resolution: 25mm &bull; Easy setting via PC software SD Manager 3 &bull; IP65/IP67/IP67K(*Optional) &bull; PSDI Selectable &bull; Auto reset or manul reset selectable &bull; Use in temperatures down to -30 Celsius &bull; Easy setting via PC software SD Manager 3 &bull; Muting &amp; Blanking Function

F3SG-4SRB0600-25-F

Safety Light Curtain, F3SG-SRB Standard, Type 4, 25 mm resolution, range 0.3 to 20.0 m, height 600 mm, PNP/NPN

MS4800

MSF4800Main

UMQTRIM

Machine Safety Technology

Struggles with light curtain installation, maintenance and troubleshooting result in unplanned downtime, increased costs and frustrated maintenance teams. The F3SG-SR series light curtain simplifies installation and reduces startup costs with quick alignment via 3-color Area Beam Indicators, no troublesome dead zones when cascading and quick programming with the Intelligent Tap.  During production, the F3SG-SR provides your team with the critical information to avoid unplanned machine stoppages with preventive maintenance data available via I/O Link or Bluetooth and immediate status updates from the 3-color Area Beam Indicators. With the addition of advanced muting and blanking functionality and protection ratings from IP67G to IP69K, the F3SG-SR supports your most demanding safety applications while reducing your costs.<ul>
<li>Area Beam Indicators (ABI) - Tri-color indicators for easy &amp; instant status</li>
<li>Harsh Environments – Cold storage, metal working (oil mist), food processing</li>
<li>Back-up &amp; restore settings with Intelligent Tap – can reduce maintenance setup time by 90%</li>
<li>Perfect fit – Protective heights in 40 mm increments</li>
<li>IO-Link – Easy remote monitoring of process &amp; service data</li>
<li>Bluetooth option</li>
<li>Separate replacement of TX/RX light curtains</li>
<li>Separate replacement of cables for light curtains</li>
<li>OSSD outputs auto sense output selection based on wiring configuration</li>
</ul>

Machine Safety Components