Network Data Connectors

VS-15-A-GC-BU/BU - D-SUB panel mounting frame, shell size 2, with 15 signal contacts, socket, gender changer, shielded, IP67 degree of protection

D-SUB panel mounting frames - VS-15-A-GC-ST/ST

D-SUB panel mounting frames - VS-25-A-GC-ST/ST

VS-25-A - D-SUB panel mounting frame, shell size 3, IP67 degree of protection

VS-25-BU-DSUB/25-MPT-0,5 - D-SUB contact insert, shell size 3, with 25 signal contacts, female type of contact, screw connection, straight, for panel mounting frame and sleeve housing with IP67 protection

D-SUB sleeve housings - VS-25-T-2M20

Contact insert - VS-25-ST-DSUB-ER

VS-25-BU-DSUB-ER - D-SUB contact insert, shell size 3, with 25 signal contacts, type of contact socket, for PCB mounting, angled, fixing with M3 thread and solder pins, for panel mounting frame VS-25-...

VS-25-ST-DSUB-EG - D-SUB contact insert, shell size 3, with 25 signal contacts, type of contact pin, with solder cup, straight, fixing with a 3 mm hole, for panel mounting frame and sleeve housing VS-25-...

VS-25-BU-DSUB-EG - D-SUB contact insert, shell size 3, with 25 signal contacts, type of contact socket, with solder cup, straight, fixing with a 3 mm hole, for panel mounting frame and sleeve housing VS-25-...

D-SUB contact insert - VS-25-ST-DSUB-FK

VS-25-BU-DSUB-FK - D-SUB contact insert, shell size 3, with 25 signal contacts, type of contact socket, flat-ribbon cable connection, angled, fixing with a 3 mm hole, for panel mounting frame VS-25-...

D-SUB contact support - VS-25-ST-DSUB-CD-G

VS-25-BU-DSUB-CD-G - D-SUB contact carrier, shell size 3, for 25 signal contacts, type of contact socket, for crimp contacts, straight, fixing with M3 thread, for panel mounting frame VS-25-...

D-SUB contact support - VS-25-ST-DSUB-CD-B

VS-25-BU-DSUB-CD-B - D-SUB contact carrier, shell size 3, for 25 signal contacts, type of contact socket, for crimp contacts, straight, fixing with a 3 mm hole, for panel mounting frame and sleeve housing VS-25-...

D-SUB contact support - VS-25-ST-DSUB-5P

VS-25-BU-DSUB-5P - D-SUB contact carrier, shell size 3, accommodation for five combined contacts, type of contact socket, straight, fixing with a 3 mm hole, for panel mounting frame and sleeve housing VS-25-...

SACC-DSIV-M12MS-5CON-L180 - Sensor/actuator flush-type plug, 5-pos., M12, A-coded, rear/screw mounting with M12 thread, with polarity protection, with straight solder connection

SACC-DSIV-M12MS-5CON-L 90 - Device connector rear mounting, 5-position, Pin, angled, M12, coding: A, Rear mounting, M12 x 1, Wave soldering