Protection Devices
VAL-MS-AR-T1/T2 75 - The VAL-MS-AR T1/T2 75 is a high-capacity SPD for Type 1 lightning as well as Type 2 switching surge currents, ideal for applications with both high load currents and high surge risk.VAL-MS BE-AR base provides a disconnect that separates the field wire from the protected mode for field diagnosis. Independent input and output terminals on the same side with ground terminals on the opposite end. All terminals are high-current screw clamping for stripped or ferruled, solid or stranded wires.
Not in stock
VAL-MS-T1/T2 48/12.5/1+1V - Universal varistor-based plug-in lightning/surge arrester for 48 V DC applications with grounded return conductor (positive pole), without risk assessment for Lightning Protection Levels III and IV.
Not in stock
ADAPTER KOAX TYP F - F-connector-to-adapter, plug-to-plug, can be plugged without thread.
Not in stock
POWERSET BC-385/3+1-100/FM - Lightning and surge arrester combination, in accordance with Type 1+2/Class I+II, for 3-phase power supply networks, with separate N and PE (L1, L2, L3, PE, N). Consisting of 3x FLT 35 CTRL-4.0 and 3x VAL-MS 400/FM and 1x FLT 100N/PE-1.5, incl. bridges and marking.
Not in stock
POWERSET BC-385/3/FM - Lightning and surge arrester combination, in accordance with Type 1+2/Class I+II, for 3-phase power supply networks, with combined PE and N installed in one conductor (L1, L2, L3, PEN). Consisting of 3 x FLT 35 CTRL-4.0 and 3 x VAL-MS 400/FM, incl. jumpers and labeling.
Not in stock
GEB-SET-T1/T2-MNT-CH - Extended surge protection equipment, including lightning/surge arresters for building installation. Arrester set with protective devices for the power supply, including accessories.
Not in stock
VAL-MS-T1/T2 48/12.5/O - Universal varistor-based plug-in lightning/surge arrester for 1-phase power supply networks with common N and PE (2-conductor system: L1, PEN), with remote indication contact.
Not in stock
