Popular Brands in { name }

Discover { name } at Proax - Canada's top automation distributor. Easy pick-up, fast shipping. Explore now.

Shop { name } Online

**Here are some possible reasons why:**
- You may’ve typed the wrong search term, such as a misspelled product name or special characters/symbols.
- We might not carry the product you're looking for

Please try refining your search by not using special characters.

**Are these not the issues? Feel free to contact us and we'll assist you as quickly as possible.**

Search

Phoenix Contact

Littelfuse

<h3>TTC-6-MOV-D-24DC-UT-I - Surge protection device</h3><p>Medium surge protection with integrated status indicator for a 2-wire floating signal circuit.</p><ul><li>Space-saving and cost-saving with a narrow overall width of just 6 mm</li><li>Continuous monitoring of protective devices, plus mechanical status indicator with optional remote signaling</li><li>Finding the right product for all possible requirements in MCR applications is easy, thanks to the complete range of products with customized features</li></ul>

2906841

Surge protection device - TTC-6-MOV-D-24DC-UT-I

The CM-MSS.13P belongs to the CM-MSS thermistor motor protection relay range. It operates with a rated control supply voltage of 110-130 V AC and 220-240 V AC and has a 1 c/o (SPDT) output with contacts rated at 250 V / 4 A. It features one sensor circuit to monitor PTC temperature sensors and works according to the closed-circuit principle. The relay will be reset automatically after the failure has been removed. A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers maintenance free Easy Connect Technology with push-in terminals.

CM-MSS.13P

CM-MSS.13P Therm. motor protec. relay 1c/o, 110-130VAC/220-240VAC

<h3>VAL-US-240/40/1+0-FM - Type 1 surge protection device</h3><p>Surge protective device, single channel with remote indicator contact for 240 V AC.</p><ul><li>With floating remote indication contact</li><li>Optical, mechanical status indication for the individual arresters</li></ul>

2910361

Type 1 surge protection device - VAL-US-240/40/1+0-FM

<h3>VAL-US-48/65/1+1V-FM - Type 1 surge protection device</h3><p>Surge protective device, two channels with remote indicator contact for 48 V DC, 2-wire plus ground</p>

2910346

Type 1 surge protection device - VAL-US-48/65/1+1V-FM

<h3>CS-UFBK - Coding element</h3><p>Coding pins for later coding of the base elements without coding belonging to the PLUGTRAB UFBK and UAK product ranges.</p>

2781576

CS-UFBK - Coding pins for later coding of the base elements without coding belonging to the PLUGTRAB UFBK and UAK product ranges.

<h3>VAL-US-347/30/3+0-FM - Type 1 surge protection device</h3><p>Surge protective device, three channel with remote indicator contact for 347/600V and 400/690 V AC, 4-wire.</p><ul><li>With floating remote indication contact</li><li>UL open terminal listed SPD</li><li>Optical, mechanical status indication for the individual arresters</li><li>Mechanical coding of all slots</li><li>Plugs can be checked with CHECKMASTER</li><li>Multi-channel type 2 protective devices</li><li>Disconnect device on each individual plug</li></ul>

2910383

Type 1 surge protection device - VAL-US-347/30/3+0-FM

<h3>CN-LAMBDA/4-0.47-BB - Surge protection device</h3><p>Attachment plug with Lambda/4 technology as surge protection for coaxial signal interfaces. Connection: N connectors socket-socket</p><ul><li>Easy installation with system-compliant connection</li><li>Use under extreme ambient conditions with robust design</li><li>Service-friendly with maintenance-free protective circuit</li><li>Exceptional protective properties with Lambda/4 technology</li></ul>

2800021

Surge protection device - CN-LAMBDA/4-0.47-BB

<h3>PT 1X2+F-BE - Surge protection base-element</h3><p>Base element for protective plug PT with protective circuit for a 2-core floating signal circuit. Integrated gas arrester as coarse protection between GND and PE. Mounting on NS 35/7.5 und NS 35/15, housing width: 17.5 mm.</p><ul><li>Maximum ease of maintenance, thanks to the 2-piece design</li><li>Easy selection for all possible demands in MCR applications with a complete product portfolio</li><li>The signal is not influenced during maintenance work, thanks to the impedance-neutral insertion and removal of protective plugs</li></ul>

2856126

PT 1X2+F-BE - Base element for protective plug PT with protective circuit for a 2-core floating signal circuit. Integrated gas arrester as coarse protection between GND and PE. Mounting on NS 35/7.5 und NS 35/15, housing width: 17.5 mm.

<h3>PT 1X2+F-BE/FM - Surge protection base-element</h3><p>Base element to accept a protective plug with diagnostic and status indicator for one floating double wire, integrated spark gap to provide a high-resistance connection between the ground of the protective circuit of the plug and ground potential.</p><ul><li>Maximum ease of maintenance, thanks to the 2-piece design</li><li>Easy selection for all possible demands in MCR applications with a complete product portfolio</li><li>The signal is not influenced during maintenance work, thanks to the impedance-neutral insertion and removal of protective plugs</li><li>Easy integration into the control room via floating remote indication contact</li></ul>

2920023

PT 1X2+F-BE/FM - Base element to accept a protective plug with diagnostic and status indicator for one floating double wire, integrated spark gap to provide a high-resistance connection between the ground of the protective circuit of the plug and ground potential.

<h3>PT 2X1-24DC/FM-ST - Surge protection plug</h3><p>Surge protection plug with integrated diagnostic and status indicator on the module and remote indication contact for two signal wires with common reference potential. Nominal voltage: 24 V DC</p><ul><li>Easy testing and documentation with CHECKMASTER 2 with pluggable protective modules</li><li>Maximum ease of maintenance, thanks to the 2-piece design</li><li>Easy selection for all possible demands in MCR applications with a complete product portfolio</li><li>The signal is not influenced during maintenance work, thanks to the impedance-neutral insertion and removal of protective plugs</li><li>Permanent protective device monitoring with optical signaling via LED</li></ul>

2920120

Surge protection plug - PT 2X1-24DC/FM-ST

<h3>VAL-US-240D/40/2+0-FM - Type 1 surge protection device</h3><p>Surge protective device, two channel with remote indicator contact for 240 V AC corner-grounded DELTA.</p>

2910369

Type 1 surge protection device - VAL-US-240D/40/2+0-FM

<h3>VAL-US-277/40-P - Type 1 surge protection plug</h3><p>UL Recognized type 1 SPD and IEC type 2 surge protection plug with a varistor and thermal disconnect for use with VAL-US base elements, mechanical and visual fault warning</p>

2910338

Type 1 surge protection plug - VAL-US-277/40-P

<h3>MT-RS485 - Surge protection device</h3><p>Rail-mountable module with surge voltage coarse and fine protection for RS-485 interface, for mounting on NS 35/7.5, housing width: 50 mm</p>

2762265

<h3>VAL-US-120/40-P - Type 1 surge protection plug</h3><p>UL Recognized type 1 SPD and IEC type 2 surge protection plug with a varistor and thermal disconnect for use with VAL-US base elements, mechanical and visual fault warning</p>

2910335

Type 1 surge protection plug - VAL-US-120/40-P

<h3>VAL-US-480D/30-P - Type 1 surge protection plug</h3><p>UL Recognized type 1 SPD and IEC type 2 surge protection plug with a varistor and thermal disconnect for use with VAL-US base elements, mechanical and visual fault warning</p>

2910340

Type 1 surge protection plug - VAL-US-480D/30-P

<h3>VAL-US-240/40/3+1-FM - Type 1 surge protection device</h3><p>Surge protective device, four channel with remote indicator contact for 240/415 V AC, 4-wire plus ground.</p><ul><li>With floating remote indication contact</li><li>Optical, mechanical status indication for the individual arresters</li><li>Multi-channel type 2 protective devices</li></ul>

2910367

Type 1 surge protection device - VAL-US-240/40/3+1-FM

<h3>VAL-US-48/65-P - Type 1 surge protection plug</h3><p>UL Recognized type 1 SPD and IEC type 2 surge protection plug with a varistor and thermal disconnect for use with VAL-US base elements, mechanical and visual fault warning</p>

2910328

Type 1 surge protection plug - VAL-US-48/65-P

<h3>VAL-US-120/65/1+1-FM - Type 1 surge protection device</h3><p>Surge protective device, two channel with remote indicator contact for 120 V AC, 2-wire plus ground.</p><ul><li>With floating remote indication contact</li><li>UL open terminal listed SPD</li><li>Thermal disconnect device for each individual plug</li><li>Mechanical coding of all slots</li><li>Optical, mechanical status indication for the individual arresters</li><li>Pluggable</li></ul>

2910356

Type 1 surge protection device - VAL-US-120/65/1+1-FM

<h3>VAL-MS 750/30-ST - Type 2 surge protection plug</h3><p>Type 2 surge protection plug with a varistor for VAL-MS base element, thermal monitoring, visual fault warning. Design: 750 V AC</p><ul><li>Quality proven millions of times over in the widest range of applications</li><li>Rapid installation with bridges, thanks to industry-standard overall width of 1 HP</li><li>Easy testing and insulation measurement, thanks to pluggable protection modules</li><li>Can be used in high-performance industrial networks and wind turbine generators (stator) due to the high nominal voltage</li></ul>

2920256

Type 2 surge protection plug - VAL-MS 750/30-ST

<h3>TT-SLKK 5-C 12N-230AC - EMC filter</h3><p>Terminal block with radio interference suppression capacitor between clamping connector and DIN rail, separate ground connection, nominal voltage: 12 nF, for mounting on NS 35/7.5, terminal width: 6.2 mm, terminal height: 69 mm</p><ul><li>Space-saving and cost-saving with a narrow overall width of just 6 mm</li><li>Cost-optimized with tailored product features</li><li>No useful signal interference with balanced low-pass</li></ul>

2748069

TT-SLKK 5-C 12N-230AC - Terminal block with radio interference suppression capacitor between clamping connector and DIN rail, separate ground connection, nominal voltage: 12 nF, for mounting on NS 35/7.5, terminal width: 6.2 mm, terminal height: 69 mm

FLT-SEC-P-T1

<p>The Phoenix Contact PT Series comprises feed-through terminal blocks that utilize Push-in connection technology, offering efficient and reliable wiring solutions for various industrial applications. These terminal blocks are designed for straightforward conductor insertion, enhancing installation speed and ensuring secure connections.</p><ul><li><strong>Push-in Connection Technology:</strong> The PT Series employs a direct plug-in method, allowing solid conductors or conductors with ferrules to be inserted easily without the need for tools. This design facilitates quick and reliable wiring.</li><li><strong>Compact Design:</strong> The terminal blocks feature a space-saving form factor, making them suitable for applications where installation space is limited.</li><li><strong>High Electrical Ratings:</strong> Depending on the specific model, the PT Series terminal blocks can handle nominal voltages up to 800 V and nominal currents up to 32 A, accommodating a wide range of electrical requirements.</li><li><strong>Versatile Conductor Compatibility:</strong> These terminal blocks support various conductor types and sizes, providing flexibility in wiring configurations.</li><li><strong>Integration with CLIPLINE Complete System:</strong> The PT Series is compatible with Phoenix Contact&#39;s CLIPLINE complete system, allowing for standardized bridging, marking, and testing accessories, which simplifies inventory management and enhances system modularity.</li></ul>

Protection Devices