Circuit Protection

Type 1 surge protection device - VAL-US-120/65/3+0-FM

Protective cover - TMC 7 B BUS CAP

Wiring bridge end cover - TMC 7 B1 END CAP

Terminal adapter - TMC 7 B1 TERM

TMC 7/8 LOTO-1 - Lockout/Tagout device for TMC 71… or TMC 81… circuit breakers. Prevents energizing while performing maintenance or service on circuit panels. Meets NEC 110.25 disconnect locking requirements.

TMC 7/8 LOTO-2 - Lockout/Tagout device for TMC 72… or TMC 82… circuit breakers. Prevents energizing while performing maintenance or service on circuit panels. Meets NEC 110.25 disconnect locking requirements.

TMC 7/8 LOTO-3 - Lockout/Tagout device for TMC 73… or TMC 83… circuit breakers. Prevents energizing while performing maintenance or service on circuit panels. Meets NEC 110.25 disconnect locking requirements.

VAL-MS-T1/T2 48/12.5/1+1/1U/FM - Universal varistor-based plug-in lightning/surge arrester for 48 V DC applications with grounded return conductor (positive pole), without risk assessment for Lightning Protection Levels III and IV, with remote indication contact.

Thermomagnetic device circuit breaker - TMC 73D 63A

CAPAROC PD 0V - Potential distributor with Push-in connections for directly connecting the 0 V return conductor in the CAPAROC system. For DIN rail installation via the CAPAROC current rails.

Wiring bridge end cover - TMC 7 B2/3 END CAP

Terminal adapter - TMC 7 B2/3 TERM

TMC 7 B2 80 56 C - Bus bar for TMC 72... circuit breakers (two phase) 17.8 mm pitch, up to 56 positions. Rated for 80 A (end feed) 600 V AC/DC. UL 508 Listed for connection of UL 1077 rated circuit breakers.

CAPAROC E2 12-24DC/2-10A - 2-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. Nominal current adjustable from 2 A to 10 A via step switch. For DIN rail installation via the CAPAROC current rails.

CAPAROC CR 20 - Busbar for CAPAROC system with 20 slots. For installation on a DIN rail.

PT 1X2+F-BE/FM - Base element to accept a protective plug with diagnostic and status indicator for one floating double wire, integrated spark gap to provide a high-resistance connection between the ground of the protective circuit of the plug and ground potential.

CAPAROC CR EXT4 - Extension busbar with 4 slots for the CAPAROC system. For installation on a DIN rail.

Surge protection plug - PT 2X1-24DC/FM-ST

CAPAROC E4 12-24DC/1-10A - Four-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. Nominal current adjustable from 1 A to 10 A via LED button. For DIN rail installation via the CAPAROC current rails.

CAPAROC CR EXT20 - Extension busbar with 20 slots for the CAPAROC system. For installation on a DIN rail.