All

MS132-12 Manual Motor Starter 8.0 ... 12 A

Fuse Holder UltraSafe™ 800VAC 1000VDC Midget 30A 2-Pole Pressure Plate IP20

Socket, DIN rail/surface mounting, 11-pin, screw terminals (standard)

UT 10 - Feed-through terminal block, nom. voltage: 1000 V, nominal current: 57 A, number of connections: 2, connection method: Screw connection, Rated cross section: 10 mm2, cross section: 0.5 mm2 - 16 mm2, mounting type: NS 35/7,5, NS 35/15, color: gray

QUINT-PS/1AC/24DC/ 3.5 - Primary-switched power supply unit QUINT POWER, Screw connection, SFB Technology (Selective Fuse Breaking), input: 1-phase, output: 24 V DC / 3.5 A

NX-series EtherCAT Coupler, 2 ports, 250 µs cycle time, 63 I/O units, max I/O current 4 A, screwless push-in connector, delivered with end cover

EtherNet/IP™ Serial Transmission System, 32in/32out, precise communication protocol control.

Tmax Breaker Frame Size XT1N 125 Thermal Magnetic Fixed 20-500 Three-Pole Fixed

3/4"" NPT Modular Air Filter, Standard Pressure Gauge, Imperial Units.

OXP6X265 SHAFT

IFRM 12P1701/S14L

VS-08-RJ45-10G/Q - RJ45 connector, design: RJ45, degree of protection: IP20, number of positions: 8, 10 Gbps, CAT6A, material: Plastic, connection method: Insulation displacement connection, connection cross section: AWG 26- 24, cable outlet: straight, color: black, Ethernet

3P MMP 2.5-4.0A RANGE

Elbow speed controller with 1/2"" NPT thread, meter-out flow control, standard hexagon lock nut.

Elbow flow controller, 1/2"" NPT, meter-out, Ø3/8 tubing, sealant included.

SZ Wall mounting bracket, stainless steel, 1.4301, Wall distance 10 mm

8 Analog Inputs, 4 to 20 mA single ended, resolution 1:8000, 250 µs/ch, screwless push-in connector, 12 mm wide

Relay, plug-in, 5-pin, SPDT, 10 A, mech & LED indicators, coil suppressor, label facility

Compact elbow speed controller, M5x0.8 port, 6mm tube OD, meter-out control, no sealant.

Managed Switch 2000, 16 RJ45 ports 10/100/1000 Mbps, PROFINET Conformance-Class A, Development process certified in accordance with IEC 62443-4-1, Compatible with IEC 62443-4-2