2TLA030054R0000
By ABB
ABB2TLA030054R0000
Official DistributorINCA emergency stop button with DYNlink signal for panel mounting. Status LED in button.Terminal block. 22.5 mm mounting hole.
Technical Specifications
Dimensions
| Product Net Depth / Length | 32.2 mm |
| Product Net Height | 32.2 mm |
| Product Net Width | 80 mm |
| Product Net Weight | 0.045 kg |
Technical
| Performance level (PL) | Up to e |
Why Proax for ABB 2TLA030054R0000?
Proax is an authorized distributor of ABB 2TLA030054R0000 and one of ABB's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Recommended
Vital 1 Safety controller with relay outputs 2NO, +24 VDC supply voltage and detachable screw terminals.For monitoring of safety devices, such as emergency stops, using DYNlink.Vital 1 is a configurable safety controller that does not require programming. It uses the DYNlink system, which allows up to 30 safety devices to be connected in series to the same circuit, while achieving PL e / SIL 3. The DYNlink circuit is a unique solution that uses one single channel to achieve upt to Cat.4/PL e. Using DYNlink reduces the installation and engineering time thanks to simple installation with serial connection using M12 connectors. Vital 1 can only be used with DYNlink safety devices, such as Eden DYN and devices with a Tina adapter.
Eden is a non-contact safety sensor used as interlocking device for e.g. doors and safe position monitoring. Adam safety sensor with DYNlink signal and information output. Used with an Eva actuator to form a non-contact safety sensor Eden. M12-5 male connector. Four pieces of DA 1B distance plates and four pieces of DA 2B distance rings are included.Adam senses the presence of Eva without mechanical contact and therefore without any wear. The compact size of Eden and its 360°mounting possibility make it easy to use in most applications.Eden is UL approved for use in US and Canada.
Reset button in Smile enclosure, 1 x NO button, 1 x Blue LED, 1 x M12-5 male connector.
Reset button in Smile enclosure, Pluto Lightbutton connection, 1 button+Blue LED, 1 x M12-5 male connector.
Reset button in Smile enclosure for local reset of Adam Reset M12-5. Blue LED, M12-5 male + female connectors.
Reset button in Smile enclosure for local reset of Adam Reset M12-8. Blue LED, M12-8 male + female connectors.
Emergency stop button for panel mounting, 22.5 mm holes, 2 NC contacts, status LED in button, terminal blocks.
Safety stop (black button) for panel mounting, 22.5 mm holes, 2 NC contacts, status LED in button, terminal blocks.
Emergency stop button for panel mounting, 22.5 mm holes, Tina adaptation to DYNlink and StatusBus functionality, Indication LED in button, detachable terminal blocks.
Emergency stop button in Smile enclosure, 2 x NC, Status LED in button, 1 x M12-5 male connector.
Emergency stop button in Smile enclosure, 2 x NC, Status LED in button, 1 x M12-5 male connector, reversed button attachement (from bottom).
Emergency stop button in Smile enclosure, 2 x NC, Status LED in button, 1 x M12-5 male connector and 1 x M12-5 female connector.
Emergency stop button in Smile enclosure, 2 x NC, Status LED in button, 1 meter cable 5 leads out of bottom.
Emergency stop button in Smile enclosure, 2 x NC, 1 meter cable 4 leads out of bottom.
Machine stop(Black button) in Smile enclosure, 2 x NC, Status LED in button, 1 x M12-5 male connector.
Push button box according to Smile design with 4 buttons, one of which is an emergency stop. The box is adapted for connection to Pluto IQ using lightbutton function. Connection via a M12-8 male connector.- Emergency stop button in Smile enclosure, Tina adaptation unit to DYNlink included, Status LED in button, 1 x M12-5 male connector.
