Proax
Currency
0 Items
Products
Manufacturers
Expertise
About UsBlogQuick OrderContact UsClearance
proax logo
Cart
Phoenix Contact SACC-SQ-M12MS-4CON-20/0,5
AllConnectorsDevice connectors
Phoenix ContactOfficial Distributor

By Phoenix Contact

SKU
MPN
1419784
Weight
0.028 kg
This product is Not Cancellable/Not Returnable
Series SACC-SQ-M

SACC-SQ-M12MS-4CON-20/0,5 - Device connector front mounting

Device connector front mounting, Universal, 4-position, Pin, straight, M12, coding: A, on free cable end, Front mounting, Square flange, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire

  • Preassembled with litz wires for immediate use
  • Customer-specific assemblies and litz wire lengths available
  • Sealed on the litz wire side for optimum leak-tightness
  • All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design
  • For high transmission safety: shield connection to the housing with optional EMC nut
  • SPEEDCON fast locking system reduces cabling times
Technical Specifications

Notes

Notes on operationThe electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
GeneralContact connection method: Crimp connection

Safety note

Safety noteWARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
Safety note• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
Safety note• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
Safety note• The products are suitable for applications in plant, controller, and electrical device engineering.
Safety note• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
Safety note• Assembled products may not be manipulated or improperly opened.
Safety note• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
Safety note• When using the product in direct connection with third-party manufacturers, the user is responsible.
Safety note• For operating voltages > 50 V AC, conductive connector housings must be grounded
Safety note• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
Safety note• Observe the corresponding technical data. You will find information:o On the producto On the packing labelo In the supplied documentationo Online at phoenixcontact.com/products under the product
Safety note• Only use tools recommended by Phoenix Contact
Safety note• Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
Safety note• Ensure that the protective or functional ground has been properly connected.
Safety note• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
Safety note• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).

Mounting

Mounting TypeFront mounting Square flange 20 mm side length
Assembly instructions20 mm side length

Product properties

ApplicationSignal
Sensor TypeUniversal
Number of Positions4
No. of cable outlets1
Shieldedno
CodingA
Thread typeM12

Insulation characteristics

Overvoltage categoryII
Degree of pollution3

Material specifications

MaterialZinc die-cast, nickel-plated
Flammability rating according to UL 94V0
Seal materialFKM
Material of grip bodyZinc die-cast, nickel-plated
Contact MaterialCuZn
Contact surface materialNi/Au
Contact carrier materialPA 6.6
Material for screw connectionZinc die-cast, nickel-plated
Conductor materialTin-plated Cu litz wires

Electrical properties

Rated surge voltage2.5 kV
Contact resistance≤ 3 mΩ
Insulation resistance≥ 100 MΩ
Nominal voltage UN250 V (AC)
Nominal voltage UN250 V (DC)
Nominal current IN4 A
Max. conductor resistance57.6 mΩ/m

Conductor connection

Connection MethodIndividual wires
Contact connection typePin
Conductor Cross Section0.34 mm²
Tightening torque3 Nm ... 4 Nm (Installation-side)

Mechanical data

Insertion/withdrawal cycles> 100

Connection 1

Head designPin
Head cable outletstraight
Head thread typeM12
CodingA

Connection 2

Head designfree cable end

Cable/line

Cable Length0.5 m
Cable TypeTPE litz wire
Signal type/categoryUniversal
Wire diameter incl. insulation1.2 mm ±0.07 mm
Single wire, colorbrown, white, blue, black
Cable cross section0.34 mm²
Conductor materialTin-plated Cu litz wires
Conductor structure signal line7x 0.25 mm
AWG Signal Line22
Material wire insulationTPE
Thickness, insulation0.21 mm (Core insulation)
Nominal voltage, cable300 V
Test voltage, cable2000 V AC
Cable resistance≤ 57.6 mΩ/m
Cable insulation resistance≥ 20 MΩ*km
Ambient Temperature (Operation)-40 °C ... 85 °C (cable, fixed installation)
Ambient Temperature (Operation)-25 °C ... 85 °C (Cable, flexible installation)

Ambient conditions

Degree of ProtectionIP67
Degree of ProtectionIP67
Ambient Temperature (Operation)-25 °C ... 85 °C (Plug / socket)
Ambient Temperature (Operation)-40 °C ... 85 °C (without mechanical actuation)
Ambient Temperature (Operation)-25 °C ... 85 °C (Cable, flexible installation)
Ambient Temperature (Operation)-40 °C ... 85 °C (cable, fixed installation)

M12

Standard designationM12 connector
Standards/specificationsIEC 61076-2-101
Accessories
  • Phoenix ContactPROT-M12 FS
    PROT-M12 FS
    1560251 - M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field
  • Phoenix ContactPROT-M12 FS-M
    PROT-M12 FS-M
    1430488 - M12 metal sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field

Why Proax for Phoenix Contact SACC-SQ-M12MS-4CON-20/0,5?

Proax is an authorized distributor of Phoenix Contact SACC-SQ-M12MS-4CON-20/0,5 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information

Alternate NamesSACCSQM12MS4CON2005
Pack Size1
Recommended
  • Phoenix ContactSACC-SQ-M12MS-4CON-20-L180
    SACC-SQ-M12MS-4CON-20-L180
    1456417 - Device connector front mounting, Universal, 4-position, Pin, straight, M12, coding: A, Front mounting, Square flange, Wave soldering, 0.34 mm2
  • Phoenix ContactSACC-SQ-M12MS-4CON-25F/0,5
    SACC-SQ-M12MS-4CON-25F/0,5
    1419991 - Device connector front mounting, 4-position, Pin, straight, M12, coding: A, on free cable end, Front mounting, Square flange, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239290
  • Phoenix ContactSACC-SQ-M12MS-5CON-20-L180
    SACC-SQ-M12MS-5CON-20-L180
    1456433 - Device connector front mounting, Universal, 5-position, Pin, straight, M12, coding: A, Front mounting, Square flange, Wave soldering, 0.34 mm2
  • Phoenix ContactSACC-SQ-M12MS-5CON-20/0,5
    SACC-SQ-M12MS-5CON-20/0,5
    1441642 - Device connector front mounting, Universal, 5-position, Pin, straight, M12, coding: A, on free cable end, Front mounting, Square flange, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire
  • Phoenix ContactSACC-SQ-M12MS-5CON-25F/0,5
    SACC-SQ-M12MS-5CON-25F/0,5
    1440973 - Device connector front mounting, 5-position, Pin, straight, M12, coding: A, on free cable end, Front mounting, Square flange, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239716
  • Phoenix ContactSACC-SQ-M12MS-8CON-20/0,5
    SACC-SQ-M12MS-8CON-20/0,5
    1441684 - Device connector front mounting, 8-position, Pin, straight, M12, coding: A, on free cable end, Front mounting, Square flange, Individual wires, cable length: 0.5 m, 0.25 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239727
  • Phoenix ContactSACC-SQ-M12MS-8CON-25F/0,5
    SACC-SQ-M12MS-8CON-25F/0,5
    1441561 - Device connector front mounting, 8-position, Pin, straight, M12, coding: A, on free cable end, Front mounting, Square flange, Individual wires, cable length: 0.5 m, 0.25 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239721
  • Phoenix ContactSACC-SQ-M12MS-17CON-20/0,5
    SACC-SQ-M12MS-17CON-20/0,5
    1441723 - Device connector front mounting, 17-position, Pin, straight, M12, coding: A, on free cable end, Front mounting, Square flange, Individual wires, cable length: 0.5 m, 0.14 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239731
  • Phoenix ContactSACC-SQ-M12MS-12CON-20/0,5
    SACC-SQ-M12MS-12CON-20/0,5
    1441707 - Device connector front mounting, Universal, 12-position, Pin, straight, M12, coding: A, on free cable end, Front mounting, Square flange, Individual wires, cable length: 0.5 m, 0.14 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239729
  • Phoenix ContactSACC-SQ-M12MS-12CON-25F/0,5
    SACC-SQ-M12MS-12CON-25F/0,5
    1441587 - Device connector front mounting, 12-position, Pin, straight, M12, coding: A, on free cable end, Front mounting, Square flange, Individual wires, cable length: 0.5 m, 0.14 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239723
  • Phoenix ContactSACC-SQ-M12MSB-5CON-20-L180
    SACC-SQ-M12MSB-5CON-20-L180
    1456459 - Device connector front mounting, Universal, 5-position, Pin, straight, M12, coding: B, Front mounting, Square flange, Solder pins, 0.34 mm2
  • Phoenix ContactSACC-SQ-M12MSB-5CON-20/0,5
    SACC-SQ-M12MSB-5CON-20/0,5
    1441668 - Device connector front mounting, Universal, 5-position, Pin, straight, M12, coding: B, on free cable end, Front mounting, Square flange, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire
  • Phoenix ContactSACC-SQ-M12MSB-5CON-25F/0,5
    SACC-SQ-M12MSB-5CON-25F/0,5
    1440999 - Device connector front mounting, 5-position, Pin, straight, M12, coding: B, on free cable end, Front mounting, Square flange, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239718
  • Phoenix ContactSACC-SQ-M12MSD-4CON-20-L180
    SACC-SQ-M12MSD-4CON-20-L180
    1456394 - Device connector front mounting, Universal, 4-position, Pin, straight, M12, coding: D, Front mounting, Square flange, Wave soldering, 0.34 mm2
  • Phoenix ContactSACC-SQ-M12MSD-4CON-20/0,5
    SACC-SQ-M12MSD-4CON-20/0,5
    1441626 - Device connector front mounting, PROFINET CAT5 (IEC 11801:2002), 4-position, Pin, straight, M12, coding: D, on free cable end, Front mounting, Square flange, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire
  • Phoenix ContactSACC-SQ-M12MSD-4CON-25F/0,5
    SACC-SQ-M12MSD-4CON-25F/0,5
    1440957 - Device connector front mounting, PROFINET CAT5 (IEC 11801:2002), 4-position, Pin, straight, M12, coding: D, on free cable end, Front mounting, Square flange, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239714
  • Phoenix ContactSACC-SQ-M12FS-4CON-20-L180
    SACC-SQ-M12FS-4CON-20-L180
    1456420 - Device connector front mounting, Universal, 4-position, Socket, straight, M12-SPEEDCON, coding: A, Front mounting, Square flange, Wave soldering, 0.34 mm2
  • Phoenix ContactSACC-SQ-M12FS-4CON-20/0,5
    SACC-SQ-M12FS-4CON-20/0,5
    1419797 - Device connector front mounting, Universal, 4-position, Socket, straight, M12, coding: A, on free cable end, Front mounting, Square flange, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire
  • Phoenix ContactSACC-SQ-M12FS-4CON-25F/0,5
    SACC-SQ-M12FS-4CON-25F/0,5
    1420003 - Device connector front mounting, 4-position, Socket, straight, M12, coding: A, on free cable end, Front mounting, Square flange, Individual wires, cable length: 0.5 m, 0.34 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239291
  • Phoenix ContactSACC-SQ-M12FS-5CON-20-L180
    SACC-SQ-M12FS-5CON-20-L180
    1456446 - Device connector front mounting, Universal, 5-position, Socket, straight, M12-SPEEDCON, coding: A, Front mounting, Square flange, Wave soldering, 0.34 mm2

Available for order