Official DistributorSKU
MPN
HC-M-04-KT-M
Weight
0.006 kg
This product is Not Cancellable/Not Returnable
Series HC-M
HC-M-04-KT-M - Contact insert module
Contact insert module, number of positions: 4xKOAX, power contacts: 0, control contacts: 4, Pin, Soldering and crimp connection, 48 V, 2 A, 0.2 mm2 ... 0.8 mm2, application: Signal
Technical Specifications
Notes
| General | For HEAVYCON housings type B6 to B48, HC-M-B…MF-... module carrier frame required, crimp contacts HC-M-04-KOAX... (crimp contacts not included in the scope of delivery) |
| General | Connectors may be operated only when there is no load/voltage. |
| General | It is imperative that guide pins (HC-CST) and sockets (HC-CBU) are used to prevent tip collision due to misalignment. |
| General | The designations “female” and “male” are used differently for coaxial contacts than for single-position contacts. The correct accessories can be found in the e-shop. |
Product properties
| Series | HC-M-04-KOAX |
| Application | Signal |
| Number of Positions | 4 |
| Connection profile | 4xKOAX |
| Contact numbering | 1 - 4 |
| Number of module slots | 1 |
| No. of power contacts | 0 |
| No. of control contacts | 4 |
| Contact material type | turned |
Insulation characteristics
| Overvoltage category | III |
| Degree of pollution | 3 |
Electrical properties
| Rated voltage (III/3) | 48 V |
| Rated surge voltage | 0.8 kV |
| Rated current | 1.5 A |
| Contact resistance, phase conductor | ≤ 3 mΩ |
| Contact resistance, inner conductor | ≤ 10 mΩ |
| Insulation resistance | ≥ 10 GΩ |
Connection technology
| Connection technology | Soldering and crimp connection |
Conductor connection
| Conductor Cross Section | 0.2 mm² ... 0.8 mm² |
| Connection cross section AWG | 24 ... 18 |
| Stripping length of the individual wire | 2.5 mm ±0.5 mm |
Dimensions
| Width | 34.2 mm |
| Height | 31.5 mm |
| Length | 14.6 mm |
Mechanical characteristics
| Contact diameter | 4.8 mm |
Material specifications
| Flammability rating according to UL 94 | V0 |
| Contact Material | Copper alloy |
| Contact surface material | Au |
| Contact carrier material | PC |
| Standards/regulations | PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
Cable/line
| Stripping length of the individual wire | 2.5 mm ±0.5 mm |
Mechanical data
| Insertion/withdrawal cycles | ≥ 500 |
Ambient conditions
| Ambient Temperature (Operation) | -40 °C ... 125 °C |
Testing
| Standards/regulations | PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
Mounting
| Assembly instructions | To ensure correct use, installation in housing with IP54 protection or better is required |
| Assembly instructions | For HC-M-04-BU-KOAX... contacts |
Accessories
1676802 - Coaxial contact, contact diameter: 4.8 mm, turned, Socket, contact material: Copper alloy, contact surface: gold-plated, connection cross section: 0.14 mm2 ... 2.5 mm2, AWG 26 ... 14, Wave impedance: 50 Ω
1655616 - Coaxial contact, for D-SUB combination inserts, solder cup, socket, straight, for cable RG 179/187, gold-plated
1182085 - Module carrier frame, size: B6, type : for the panel mounting side (a, b, c, ...), 4 mm2 ... 6 mm2, application: Module carrier frame
1182088 - Module carrier frame, size: B10, type : for the panel mounting side (a, b, c, ...), 4 mm2 ... 6 mm2, application: Module carrier frame
1182090 - Module carrier frame, size: B16, type : for the panel mounting side (a, b, c, ...), 4 mm2 ... 6 mm2, application: Module carrier frame
1182094 - Module carrier frame, size: B24, type : for the panel mounting side (a, b, c, ...), 4 mm2 ... 6 mm2, application: Module carrier frame
1182087 - Module carrier frame, size: B6, type : for the sleeve side (A, B, C, ...), 4 mm2 ... 6 mm2, application: Module carrier frame
1182089 - Module carrier frame, size: B10, type : for the sleeve side (A, B, C, ...), 4 mm2 ... 6 mm2, application: Module carrier frame
1182093 - Module carrier frame, size: B16, type : for the sleeve side (A, B, C, ...), 4 mm2 ... 6 mm2, application: Module carrier frame
1182095 - Module carrier frame, size: B24, type : for the sleeve side (A, B, C, ...), 4 mm2 ... 6 mm2, application: Module carrier frame
Why Proax for Phoenix Contact 1417371?
Proax is an authorized distributor of Phoenix Contact 1417371 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
1417370 - Contact insert module, number of positions: 4xKOAX, power contacts: 0, control contacts: 4, Socket, Soldering and crimp connection, 48 V, 2 A, 0.2 mm2 ... 0.8 mm2, application: Signal
1414362 - Contact insert module, number of positions: 4, power contacts: 4, control contacts: 0, Pin, Crimp connection, 690 V, 40 A, 1.5 mm2 ... 6 mm2, application: Power
1686245 - Coaxial contact, contact diameter: 4.8 mm, turned, Pin, contact material: Copper alloy, contact surface: gold-plated, connection cross section: 0.14 mm2 ... 2.5 mm2, AWG 26 ... 14, Wave impedance: 75 Ω
1676815 - Coaxial contact, contact diameter: 4.8 mm, turned, Pin, contact material: Copper alloy, contact surface: gold-plated, connection cross section: 0.14 mm2 ... 2.5 mm2, AWG 26 ... 14, Wave impedance: 50 Ω
1414363 - Contact insert module, number of positions: 4, power contacts: 4, control contacts: 0, Socket, Crimp connection, 690 V, 40 A, 1.5 mm2 ... 6 mm2, application: Power- 1686258 - Coaxial contact, contact diameter: 4.8 mm, turned, Socket, contact material: Copper alloy, contact surface: gold-plated, connection cross section: 0.14 mm2 ... 2.5 mm2, AWG 26 ... 14, Wave impedance: 75 Ω
- 1676802 - Coaxial contact, contact diameter: 4.8 mm, turned, Socket, contact material: Copper alloy, contact surface: gold-plated, connection cross section: 0.14 mm2 ... 2.5 mm2, AWG 26 ... 14, Wave impedance: 50 Ω
1645972 - HEAVYCON contact insert module, female, 3-pos., for crimp connection, without crimp contacts
1645969 - HEAVYCON contact insert module, male, 3-pos., for crimp connection, without crimp contacts
1417372 - Contact insert module, number of positions: 5, power contacts: 5, control contacts: 0, Pin, Push-in connection, 400 V, 16 A, 0.14 mm2 ... 2.5 mm2, application: Power
1424219 - Contact insert module, number of positions: 3, power contacts: 3, control contacts: 0, Pin, Push-in connection, 690 V, 40 A, 2.5 mm2 ... 6 mm2, application: Power
1417373 - Contact insert module, number of positions: 5, power contacts: 5, control contacts: 0, Socket, Push-in connection, 400 V, 16 A, 0.14 mm2 ... 2.5 mm2, application: Power
1424218 - Contact insert module, number of positions: 3, power contacts: 3, control contacts: 0, Socket, Push-in connection, 690 V, 40 A, 2.5 mm2 ... 6 mm2, application: Power
