Official DistributorSKU
PHX1414412
MPN
1414412
Weight
0.063 kg
SACC-CC-8QO SH ETH - Conductor connector
Cable connector, Ethernet CAT6A (10 Gbps), 8-pos., halogen-free, shielded, insulation displacement connection, housing material: zinc die-cast, nickel-plated, outer cable diameter of 5 mm ... 9.7 mm
- Innovative and time saving - QUICKON fast connection for time saving of up to 80 % for on-site connection
- Safe use in the field, thanks to a high degree of protection
- Reliable signal transmission – 360° shielding in environments with electromagnetic interference
- Insulation displacement connection: innovative and time-saving assembly without stripping the single wire
Documents
Technical Specifications
Notes
| Assembly instruction: | NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. |
Mounting
| Assembly instructions | If the conductor is to be reconnected, it must be cut off above the last contact point. |
Product properties
| Sensor Type | Ethernet |
| Number of Positions | 8 |
| No. of cable outlets | 2 |
| Shielded | yes |
Insulation characteristics
| Overvoltage category | III |
| Degree of pollution | 3 |
Dimensions
| Length | 83 mm |
| Wrench size, union nut | 15 mm |
| Wrench size, counter nut | 17 mm |
External dimensions
| Outside diameter | 5 mm ... 9.7 mm |
Connection technology
| Connection Method | Insulation displacement connection |
| Frequency of connections between conductors of the same cross section | 10 |
Conductor connection
| Structure of individual litz in acc. with VDE 0295 / smallest wire diameter | Class 2-6 |
| Tightening torque | 5 Nm (Pressure nut) |
| Wrench size, union nut | 15 mm |
| Wrench size, contact carrier | 17 mm |
| Wire diameter including insulation | 0.75 mm ... 2 mm |
| Tightening torque | 5 Nm (Pressure nut) |
Pin assignment
| Contact | Color (signal designation) | Contact (optional) | 1 = WHOG (D1+) |
| Contact | Color (signal designation) | Contact (optional) | 2 = OG (D1-) |
| Contact | Color (signal designation) | Contact (optional) | 3 = WHGN (D2+) |
| Contact | Color (signal designation) | Contact (optional) | 4 = GN (D2-) |
| Contact | Color (signal designation) | Contact (optional) | 5 = WHBN (D4+) |
| Contact | Color (signal designation) | Contact (optional) | 6 = BN (D4-) |
| Contact | Color (signal designation) | Contact (optional) | 7 = WHBU (D3-) |
| Contact | Color (signal designation) | Contact (optional) | 8 = BU (D3+) |
Electrical properties
| Rated surge voltage | 0.8 kV |
| Insulation resistance | ≥ 100 MΩ |
| Nominal voltage UN | 48 V AC |
| Nominal voltage UN | 60 V DC |
| Nominal current IN | 0.5 A (30 W) |
| Transmission characteristics (category) | CAT6A |
Material specifications
| Flammability rating according to UL 94 | V0 |
| Seal material | NBR |
| Material of grip body | Zinc die-cast, nickel-plated |
| Contact Material | CuSn |
| Contact surface material | Ni/Au |
| Contact carrier material | PA 6.6 |
| Material for screw connection | Zinc die-cast, nickel-plated |
| Standards/regulations | PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
| Wire insulation material | PVC / PE / PP / rubber |
Connection 1
| Head design | Cable connectors |
Cable/line
| Signal type/category | Ethernet CAT6A (IEC 11801), 10 Gbps |
Ambient conditions
| Degree of Protection | IP65 |
| Degree of Protection | IP67 |
| Ambient Temperature (Operation) | -40 °C ... 85 °C |
| Ambient temperature (assembly) | -5 °C ... 50 °C |
Testing
| Standards/regulations | PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) |
| Standards/specifications | based on IEC 61076-2-109 |
| Standard designation | Shock, vibration |
| Standards/specifications | EN 50155:2001 |
Accessories
VS-08-RJ45-FOLIEN-SET - Shielding foil set, 25 pieces, replacement for RJ45 and M12 Quickon connector
MICROFOX-SB - Electronic diagonal cutter, round head, without chamfer, with opening spring, mirror-polished and oiled, 2-component grip, cutting capacity: soft 0.2 - 2.0 mm; medium hard 1.2 mm; hard 0.5 mm diameter
WIREFOX-D 40 - Stripping tool, for stripping cables of 4.5 mm ‑ 40 mm‑Ø, insulation thickness of up to 4.5 mm, pivoting blade for round, lengthwise, and spiral cuts
VS-CABLE-STRIP-VARIO - Stripping tool, for the multi-level stripping of shielded cables
Why Proax for Phoenix Contact SACC-CC-8QO SH ETH?
Proax is an authorized distributor of Phoenix Contact SACC-CC-8QO SH ETH and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Recommended
SACC-CC-8QO SH PN - Cable connector, PROFINET CAT6A (10 Gbps), 8-pos., halogen-free, shielded, insulation displacement connection, housing material: zinc die-cast, nickel-plated, outer cable diameter of 5 mm ... 9.7 mm- SACC-CC-8QO-0,5 SH - Cable connector, 8-pos., halogen-free, shielded, insulation displacement connection, housing material: zinc die-cast, nickel-plated, outer cable diameter of 5 mm ... 9.7 mm
- SACC-CC-5QO-0,75 SH - Cable connector, 5-pos., halogen-free, shielded, insulation displacement connection, housing material: zinc die-cast, nickel-plated, outer cable diameter of 5 mm ... 9.7 mm
- SACC-CC-4QO SH ETH - Cable connector, Ethernet CAT5 (100 Mbps), 4-pos., halogen-free, shielded, insulation displacement connection, housing material: zinc die-cast, nickel-plated, outer cable diameter of 5 mm ... 9.7 mm
- SACC-CC-4QO SH PN - Cable connector, PROFINET CAT5 (100 Mbps), 4-pos., halogen-free, shielded, insulation displacement connection, housing material: zinc die-cast, nickel-plated, outer cable diameter of 5 mm ... 9.7 mm
- SACC-CC-4QO-0,75 SH - Cable connector, 4-pos., halogen-free, shielded, insulation displacement connection, housing material: zinc die-cast, nickel-plated, outer cable diameter of 5 mm ... 9.7 mm
- SACC-CC-2QO SH PB - Cable connector, PROFIBUS DP (12 Mbps), 3-pos., halogen-free, shielded, displacement connection, housing material: zinc die-cast, nickel-plated, outer cable diameter of 5 mm ... 9.7 mm
SACC-CC1,0-T-0,50-M AU PU100 - Crimp contact, contact diameter: 1 mm, turned, Pin, contact material: CuZn, contact surface: Ni/Au, connection cross section: 0.34 mm2 ... 0.5 mm2, AWG 22 ... 20
SACC-CI-FS-5CON-L 90 SH SCO - Contact carrier, 5-position, Socket, angled, M12-SPEEDCON, coding: A, PCB mounting, Wave soldering, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1239611
SACC-CI-M8MS-4P SMD R32 - Contact carrier, 4-position, Pin, straight, M8, coding: A, PCB mounting, SMD reflow, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1308269- SACC-CI-M8MS-4P SMD T - Contact carrier, 4-position, Pin, straight, M8, coding: A, PCB mounting, SMD reflow, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1308252
SACC-CI-M8MS-3P SMD R32 - Contact carrier, 3-position, Pin, straight, M8, coding: A, PCB mounting, SMD reflow, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1308267- SACC-CI-M8MS-3P SMD T - Contact carrier, 3-position, Pin, straight, M8, coding: A, PCB mounting, SMD reflow, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1308251
SACC-CI-M8FSD-4P SMD R32 - Contact carrier, 4-position, Socket, straight, M8, coding: D, PCB mounting, SMD reflow
SACC-CI-M8FSB-5P SMD R32 - Contact carrier, Universal, 5-position, Socket, straight, M8, coding: B, PCB mounting, SMD reflow, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1238985- SACC-CI-M8FSB-5P SMD T - Contact carrier, Universal, 5-position, Socket, straight, M8, coding: B, PCB mounting, SMD reflow, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1238976
SACC-CI-M8FS-8P SMD R32 - Contact carrier, 8-position, Socket, straight, M8, coding: A, PCB mounting, SMD reflow, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1238987- SACC-CI-M8FS-8P SMD T - Contact carrier, 8-position, Socket, straight, M8, coding: A, PCB mounting, SMD reflow, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1238978
SACC-CI-M8FS-6P SMD R32 - Contact carrier, 6-position, Socket, straight, M8, coding: A, PCB mounting, SMD reflow, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1238986- SACC-CI-M8FS-6P SMD T - Contact carrier, 6-position, Socket, straight, M8, coding: A, PCB mounting, SMD reflow, Alternative product in accordance with RoHS II without Exemption 6c (Pb < 0.1 %) item no.: 1238977