Official DistributorSKU
MPN
CK2,5-M-6 AG
Weight
0.002 kg
CK2,5-M-6 AG - Crimp contact
Crimp contact, Range of articles: PRC 35, max. conductor cross section: 6 mm2, rated voltage: 690 V AC, rated current: 35 A, Connection method: Crimp connection, Contact connection type: Pin, Crimp the wire with the crimp contact in accordance with DIN EN 60352‑2
- Crimp contacts for PRC device connectors for assembly
- 3 variants for wire cross sections of 2.5 / 4.0 / 6.0 mm²
Technical Specifications
Notes
| Notes on operation | Crimp the wire with the crimp contact in accordance with DIN EN 60352‑2 |
| Note on application | Please remove the crimping pliers locator |
Safety note
| Safety note | • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. |
| Safety note | • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product. |
| Safety note | WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. |
| Safety note | • Assembled products may not be manipulated or improperly opened. |
| Safety note | • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products). |
| Safety note | • When using the product in direct connection with third-party manufacturers, the user is responsible. |
| Safety note | • For operating voltages > 50 V AC, conductive connector housings must be grounded |
| Safety note | • Ensure that the protective or functional ground has been properly connected. |
| Safety note | • VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector |
| Safety note | • Observe the corresponding technical data. You will find information:o On the producto On the packing labelo In the supplied documentationo Online at phoenixcontact.com/products under the product |
| Safety note | • Only use tools recommended by Phoenix Contact |
| Safety note | • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product. |
| Safety note | • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products |
| Safety note | • Operate the connector only when it is fully plugged in. |
| Safety note | • Operate the connector only when it is fully plugged in and interlocked. |
| Safety note | • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards. |
| Safety note | • Observe the minimum bending radius of the cable. Lay the cable without twisting it. |
| Safety note | • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). |
Product properties
| Product family | PRC 35 |
Insulation characteristics
| Protection class | II |
| Degree of pollution | 2 |
Connection data
| Connection Method | Crimp connection |
| Contact connection type | Pin |
Material specifications
| Flammability rating according to UL 94 | V0 |
| Contact Material | Cu alloy |
| Contact surface material | Ag |
Dimensions
| Width | 5.3 mm |
| Height | 31.2 mm |
| Length | 5.3 mm |
Electrical properties
| Nominal voltage ATD | 690 V AC in accordance with IEC 61984 |
| Nominal voltage ATD | 600 V AC In accordance with UL 2238 |
| Rated current | 35 A (in accordance with IEC 61984) |
| Rated current | 32 A (in accordance with IEC 61535) |
Mechanical data
| Insertion/withdrawal cycles | 100 |
Ambient conditions
| Ambient temperature (assembly) | 5 °C ... 85 °C |
Accessories
CRIMPFOX-4,0-ED-6,00 - Crimping pliers, for CK 4,0... contacts, for 4.0 - 6.0 mm2 conductor cross sections
Why Proax for Phoenix Contact 1409209?
Proax is an authorized distributor of Phoenix Contact 1409209 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 100 |
Recommended
CK2,5-M-4 AG - Crimp contact, Range of articles: PRC 35, max. conductor cross section: 4 mm2, rated voltage: 690 V AC, rated current: 32 A, Connection method: Crimp connection, Contact connection type: Pin, Crimp the wire with the crimp contact in accordance with DIN EN 60352‑2- CK2,5-M-2,5 AG - Crimp contact, Range of articles: PRC 35, max. conductor cross section: 2.5 mm2, rated voltage: 690 V AC, rated current: 24 A, Connection method: Crimp connection, Contact connection type: Pin, Crimping recommendation: Crimp the conductors with the crimp contact in accordance with DIN EN 60352‑2.
CK2,5-ED-0,75BU AG - Crimp contact, contact diameter: 2.5 mm, turned, Socket, contact material: Copper alloy, contact surface: silver-plated, connection cross section: 0.75 mm2 ... 0.75 mm2, AWG 18
CK2,5-ED-0,75ST AG - Crimp contact, contact diameter: 2.5 mm, turned, Pin, contact material: Copper alloy, contact surface: silver-plated, connection cross section: 0.75 mm2 ... 0.75 mm2, AWG 18- CK2,5-ED-0,50BU AG - Crimp contact, contact diameter: 2.5 mm, turned, Socket, contact material: Copper alloy, contact surface: silver-plated, connection cross section: 0.5 mm2 ... 0.5 mm2, AWG 20
CK2,5-ED-0,50BU AU - Crimp contact, contact diameter: 2.5 mm, turned, Socket, contact material: Copper alloy, contact surface: gold-plated, connection cross section: 0.5 mm2 ... 0.5 mm2, AWG 20- CK2,5-ED-0,37BU AU - Crimp contact, contact diameter: 2.5 mm, turned, Socket, contact material: Copper alloy, contact surface: gold-plated, connection cross section: 0.14 mm2 ... 0.37 mm2, AWG 22 ... 26
- CK2,5-ED-0,50ST AG - Crimp contact, contact diameter: 2.5 mm, turned, Pin, contact material: Copper alloy, contact surface: silver-plated, connection cross section: 0.5 mm2 ... 0.5 mm2, AWG 20
CK2,5-ED-0,50ST AU - Crimp contact, contact diameter: 2.5 mm, turned, Pin, contact material: Copper alloy, contact surface: gold-plated, connection cross section: 0.5 mm2 ... 0.5 mm2, AWG 20- CK2,5-ED-0,37ST AU - Crimp contact, contact diameter: 2.5 mm, turned, Pin, contact material: Copper alloy, contact surface: gold-plated, connection cross section: 0.14 mm2 ... 0.37 mm2, AWG 22 ... 26
- Crimp contact, contact diameter: 2.5 mm, turned, Socket, contact material: Copper alloy, contact surface: silver-plated, connection cross section: 1.5 mm2 ... 1.5 mm2, AWG 16
- CK2,5-ED-1,50BU AU - Crimp contact, contact diameter: 2.5 mm, turned, Socket, contact material: Copper alloy, contact surface: gold-plated, connection cross section: 1.5 mm2 ... 1.5 mm2, AWG 16
CK2,5-ED-1,50-F AG LP50 - Crimp contact, contact diameter: 2.5 mm, turned, Socket, contact material: Copper alloy, contact surface: silver-plated, connection cross section: 1.5 mm2 ... 1.5 mm2, AWG 16- CK2,5-ED-1,50-M AG LP - Crimp contact, contact diameter: 2.5 mm, turned, Pin, contact material: Copper alloy, contact surface: silver-plated, connection cross section: 1.5 mm2 ... 1.5 mm2, AWG 16
- CK2,5-ED-1,50ST-S AG - Crimp contact, contact diameter: 2.5 mm, turned, Pin, contact material: Copper alloy, contact surface: silver-plated, connection cross section: 1.5 mm2 ... 1.5 mm2, AWG 16, last make, first break contact
- CK2,5-ED-1,50ST AG - Crimp contact, contact diameter: 2.5 mm, turned, Pin, contact material: Copper alloy, contact surface: silver-plated, connection cross section: 1.5 mm2 ... 1.5 mm2, AWG 16
