MRC01-C
Official DistributorDocuments
AZ Robot Controller
The AZ Series Robot Controller with EtherNet/IP™ enables simple and efficient control of custom robotic systems using Oriental Motor’s AZ Series motors and actuators. Designed for easy setup, it supports programming, operation, and verification in a streamlined workflow.
With built-in EtherNet/IP communication, the controller integrates seamlessly with PLC-based systems, allowing direct control and real-time data exchange. It supports a wide range of robot configurations, including Cartesian, SCARA, and articulated systems.
Combined with intuitive programming tools and high-precision motion control, the AZ Series controller provides a flexible and reliable solution for applications such as pick-and-place, assembly, and material handling.
| Ambient Humidity | 85% max. (noncondensing) |
| Ambient temperature range | 0ºC ~ +55ºC (+32ºF ~ +131ºF) (nonfreezing) |
| Cable Specifications | Shielded twisted-pair (STP cable), Category 5e or higher, Total extension length: 50 m (164 ft.) max. |
| Communication Method | Full duplex/Half duplex (Autonegotiation) |
| Communication Protocol | EtherNet/IP Communication (Conforms with CT17) |
| Control Power Supply | 24 VDC ±10% |
| Degree of Protection | IP10 |
| Device Type | 43: Generic Device |
| Drive Command | P to P, Linear Interpolation, Circular Interpolation, Arc Interpolation, Palette (P to P, Line, Arc) |
| IP Address Setting Method | Parameter, DHCP |
| Implicit Communication - Communication Cycle (RPI) | 10 to 3200 ms |
| Implicit Communication - Connection Type | Exclusive Owner, Input Only |
| Implicit Communication - Connection Type (Driver > Scanner) | Point-to-Point, Multicast |
| Implicit Communication - Connection Type (Scanner > Controller) | Point-to-Point |
| Implicit Communication - Data Trigger | Cyclic |
| Implicit Communication - Number of Connections | 2 |
| Input Current | 0.2 A |
| Interface - Control Input | 8 points, Photocoupler |
| Interface - Control Output | 8 points, Photocoupler/Open collector |
| Interface - Field Network | EtherNet/IP |
| Monitor | Robot Graphic, Alarm, Information, etc. |
| Network Topologies | Star, Linear bus, Ring (Device Level Ring) |
| Number of Control Axes | 8 axes max (Only one robot can be controlled by MRC01-C) |
| Number of Occupied Bytes - Input (Controller > Scanner) | 2 to 228 bytes |
| Number of Occupied Bytes - Output (Scanner > Controller) | 2 to 228 bytes |
| Operating Atmosphere | No corrosive gases or dust. The product should not be exposed to water or oil. |
| Power Supply | 24 VDC |
| Robot Model | Cartesian (2 or 3 axes), Cartesian-Horizontal Gantry (2 or 3 axes) |
| Safety Standards | CE |
| Setting Tool | Programming Software MRC Studio |
| Transmission rate | 10/100 Mbps (Autonegotiation) |
| USB Connector | USB 2.0 (Full-Speed) Length 3m (9.8 ft.) max. Type: A to mini B |
Why Proax for Oriental Motor MRC01-C?
Proax is the authorized distributor of Oriental Motor MRC01-C. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
| Alternate Names | MRC01C |
| Pack Size | 1 |
