Official DistributorThe REMLIVE RL-24i Isolator Check displays clear live/isolation status, features a bright display, ensures electrical isolation between units, and works with multiple voltage ranges to enhance lockout/tagout safety procedures.
✅ Up to 690VAC Cat IV configurations
✅ Compliance with IEC 60204
✅ Maintenance-free operation with a consistent 1-second flash rate
✅ Dual redundant internal surge protection
Documents
Remlive
The REMLIVE RL-24i is a comprehensive electrical safety solution that combines isolation verification and phase monitoring in a single system. This device creates electrical isolation between DIN rail units and door-mounted displays while monitoring voltages from 24V to 1000V. It features super-bright indicators that flash when power is detected, enhancing lockout/tagout procedures and providing clear visual confirmation of equipment status. The system monitors individual phase lines and detects failures immediately, with LEDs indicating the status of each component.
| Voltage Range (AC) | 24V - 1000V |
| Voltage Range (DC) | 26V - 1000V |
| Input Frequency | 50/60 Hz |
| Maximum input current | 20 mA |
| Body/Housing Material | UL94 V-0 |
| Wire Length (supplied) | 1500mm (extendable to 10m) |
| IP Rating (door unit) | IP66 |
| Mounting | DIN-35 Rail Mount |
| Door Unit Mounting Hole | 30.5mm diameter |
| Dimensions (H×W×D) | 122mm × 100mm × 22.5mm |
| Operating Temperature | -35°C to 55°C |
| Maximum altitude | 5000m |
| Standards | EN 61326-1, EN 61010-1, UL 61010-1, CSA C22.2 No. 61010-1, NEMA 4X, IEC 60204, RoHS 2011/65/EU & 2015/863 |
| Certifications | CE, MET, RCM, UKCA |
Why Proax for Fortress Safety 00681682?
Proax is the authorized distributor of Fortress Safety 00681682. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
| Pack Size | 1 |
4 Digital Safety Outputs, PNP 24 VDC, 0.5 A/point, 2.0 A/NX Unit, screwless push-in connector, 12 mm wide
Programmable Safety controller,G9SP standalone , 20 safety input, 8 safety output, 6 test output. PNP
Safety Sensor, F3SG-R Easy, Type 4, 30 mm resolution, range 0.3 to 20.0 m, height 1550 mm, PNP
G9SP Standalone Safety controller, 10 safety input, 4 safety output, 4 test output, 4 standard output. PNP
