Official Distributor
SKU
MPN
SACC-M12FST-4PL-CM
Weight
0.091 kg
Series SACC-M
SACC-M12FST-4PL-CM - Power connector
Power connector, Power, 4-position, unshielded, Socket straight M12, coding: T, Push-lock spring connection, knurl material: Brass, nickel-plated, external cable diameter 6 mm ... 11 mm
- Time-saving Push-Lock connection: Tool-free connection and disconnection of conductors by opening the contact levers
- Intuitive connection: Easy assignment of individual litz wires with color-coded and numerical identification of the contact levers
- Integrated Push-in Technology: Wire rigid and pretreated conductors easily by means of simple, direct insertion
- Shock- and vibration-resistant connection: Proven spring-cage technology guarantees secure and reliable contacting
- Protected seal in the M12 socket
Technical Specifications
Notes
Assembly instruction: | NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. |
Mounting
Assembly instructions | The wires can be connected both with ferrules and without ferrules |
Product properties
Application | Power supply |
Sensor Type | Power |
Number of Positions | 4 |
No. of cable outlets | 1 |
Shielded | no |
Coding | T |
Cable outlet | straight |
Insulation characteristics
Overvoltage category | III |
Degree of pollution | 3 |
Dimensions
Length | 68 mm |
External dimensions
Outside diameter | 6 mm ... 11 mm |
Housing
Diameter housing | 23 mm |
Material specifications
Flammability rating according to UL 94 | V0 |
Material of grip body | Brass, nickel-plated |
Contact surface material | Au |
Material for screw connection | Brass, nickel-plated |
Conductor connection
Connection Method | Push-lock spring connection |
Connection cross section | 1.5 mm² ... 2.5 mm² |
Connection cross section | 0.75 mm² ... 2.5 mm² (with ferrule) |
Connection cross section | 1.5 mm² ... 1.5 mm² (solid) |
Connection cross section AWG | 16 ... 14 (without ferrule) |
Connection cross section AWG | 18 ... 14 (with ferrule) |
Stripping length of the individual wire | 10 mm |
Tightening torque | 0.6 Nm (M12 knurl) |
Tightening torque | 5 Nm (Pressure nut with connector housing) |
Pin assignment
Contact | Color (signal designation) | Contact (optional) | 1 = BN |
Contact | Color (signal designation) | Contact (optional) | 2 = WH |
Contact | Color (signal designation) | Contact (optional) | 3 = BU |
Contact | Color (signal designation) | Contact (optional) | 4 = BK |
Electrical properties
Rated surge voltage | 1.5 kV |
Nominal voltage UN | 63 V DC |
Nominal current IN | 12 A (when using 1.5 mm² conductors) |
Nominal current IN | 12 A (at 40 °C) |
Mechanical data
Insertion/withdrawal cycles | ≥ 100 |
Connection 1
Head design | Socket |
Head cable outlet | straight |
Head thread type | M12 |
Coding | T |
Cable/line
Signal type/category | Power |
Stripping length of the individual wire | 10 mm |
Ambient conditions
Degree of Protection | IP65 |
Ambient Temperature (Operation) | -40 °C ... 85 °C (Plug / socket) |
Standards and Regulations
Standard designation | M12 connector |
Standards/specifications | based on IEC 61076-2-111 |
Why Proax for Phoenix Contact 1151366?
Proax is an authorized distributor of Phoenix Contact 1151366 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 1 |
Recommended