Name: 1234302
Brand: Phoenix Contact
SKU: PHX1234302
Price: 44.0000 CAD
Availability: BackOrder

Official Distributor

By Phoenix Contact

SKU

MPN

PS-EE-2G/1AC/24DC/120W/SC

Weight

0.71 kg

Series PS-EE

PS-EE-2G/1AC/24DC/120W/SC - Power supply unit

Primary-switched power supply unit, ESSENTIAL POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 5 A, adjustable from 24 V DC ... 28 V DC

Documents

Technical Document

Technical Specifications

AC operation

Supply system configuration	TN, TT, IT (PE)
Nominal input voltage range	100 V AC ... 240 V AC
Input voltage range	110 V AC ... 240 V AC ±10 % (PN = 120 W)
Input voltage range	100 V AC ... 109 V AC -15 % ... +10 % (PN = 100 W)
Typical national grid voltage	120 V AC
Typical national grid voltage	230 V AC
Voltage type of supply voltage	AC
Inrush Current	typ. 43 A (at 25 °C)
Inrush current integral (I²t)	typ. 0.7 A2s
Frequency range (f_N)	50 Hz ... 60 Hz ±10 %
Mains buffering time	typ. 15 ms (120 V AC)
Mains buffering time	typ. 42 ms (230 V AC)
Current consumption	max. 2 A (120 W)
Current consumption	max. 1.5 A (100 W)
Current consumption	typ. 1.3 A (110 V AC (120 W))
Current consumption	typ. 0.6 A (240 V AC (120 W))
Current consumption	typ. 1.2 A (100 V AC (100 W))
Current consumption	typ. 1.1 A (109 V AC (100 W))
Protective circuit	Transient protection; Varistor
Switch-on time	typ. 1 s
Device mains fuse	3.15 A internal (device protection), fast-blow
Recommended breaker for input protection	10 A ... 16 A (Characteristic B, C, D, K or comparable)
Discharge current to PE	< 3.5 mA

Output data

Efficiency	typ. 87 % (120 V AC)
Efficiency	typ. 88 % (230 V AC)
Nominal Output Voltage	24 V DC
Setting range of the output voltage (U_Set)	24 V DC ... 28 V DC (> 24 V DC, constant capacity restricted)
Nominal output current (I_N)	max. 5 A (PN = 120 W)
Nominal output current (I_N)	max. 4.16 A (PN = 100 W)
Short-circuit-proof	yes
No-load proof	yes
Crest factor	typ. 1.5 (120 V AC)
Crest factor	typ. 1.5 (230 V AC)
Output power (P_N)	120 W (240 V AC)
Output power (P_N)	100 W (100 V AC)
Connection in parallel	yes, for increasing power and redundancy with diode
Connection in series	yes, for increased output voltage
Feedback voltage resistance	≤ 35 V DC
Protection against overvoltage at the output (OVP)	≤ 35 V DC
Residual ripple	typ. 70 mVPP (with nominal values)
Control deviation	< 2 % (change in load, static 10 % ... 90 %)
Control deviation	< 4 % (change in load, dynamic 10 % ... 90 %)
Control deviation	< 0.1 % (change in input voltage ±10 %)
Rise time	< 2 s (UOut = 10 % ... 90 %)
Minimum no-load power dissipation	< 1 W (120 V AC)
Maximum no-load power dissipation	< 1 W (230 V AC)
Minimum nominal load power dissipation	< 20 W (120 V AC)
Power loss nominal load max.	< 16 W (230 V AC)
Integrated fuse protection	no

Input

Position	1.x
Identification	1.1 (), 1.2 (L), 1.3 (N)

Conductor connection

Connection Method	Screw connection
rigid	0.5 mm² ... 2.5 mm²
flexible	0.5 mm² ... 2.5 mm²
flexible with ferrule without plastic sleeve	0.5 mm² ... 2.5 mm²
flexible with ferrule with plastic sleeve	0.5 mm² ... 2.5 mm²
rigid (AWG)	20 ... 14 (Cu)
Stripping length	6.5 mm
Tightening torque	0.5 Nm ... 0.6 Nm
Tightening torque	5 lbf-in. ... 7 lbf-in.
Drive form screw head	Slotted L

Output

Position	2.x
Identification	2.1, 2.2 (+), 2.3, 2.4 (-)

Conductor connection

Connection Method	Screw connection
rigid	1 mm² ... 2.5 mm²
flexible	1 mm² ... 2.5 mm²
flexible with ferrule without plastic sleeve	1 mm² ... 2.5 mm²
flexible with ferrule with plastic sleeve	1 mm² ... 2.5 mm²
rigid (AWG)	17 ... 14 (Cu)
Stripping length	6.5 mm
Tightening torque	0.5 Nm ... 0.6 Nm
Tightening torque	5 lbf-in. ... 7 lbf-in.
Drive form screw head	Slotted L

LED signaling

Types of signaling	LED DC OK – signal state operation (UN = 24 V DC, IOut = IN)
Function	Visual operating state display
Color	green
LED off	Supply voltage input AC not present (Off)
LED on (green), DC OK	UOUT > 15 V (On (green), DC OK)

Electrical properties

Number of phases	1.00
Insulation voltage input/output	4 kV AC (type test)
Insulation voltage input/output	3 kV AC (routine test)
Insulation voltage input / PE	3.5 kV AC (type test)
Insulation voltage input / PE	2.4 kV AC (routine test)

Product properties

Product family	ESSENTIAL POWER
MTBF (Telcordia SR-332)	> 2470000 h (25 °C)
MTBF (Telcordia SR-332)	> 2000000 h (40 °C)
MTBF (Telcordia SR-332)	> 1840000 h (45 °C)

Insulation characteristics

Protection class	I
Degree of pollution	2

Life expectancy (electrolytic capacitors)

Current	5 A
Temperature	40 °C
Time	24000 h
Additional text	120 V AC
Current	5 A
Temperature	30 °C
Time	48000 h
Additional text	120 V AC
Current	5 A
Temperature	40 °C
Time	32000 h
Additional text	230 V AC
Current	5 A
Temperature	30 °C
Time	64000 h
Additional text	230 V AC

Item dimensions

Width	40 mm
Height	124 mm
Depth	125 mm

Installation dimensions

Installation distance right/left	10 mm / 10 mm
Installation distance top/bottom	30 mm / 30 mm

Mounting

Mounting Type	DIN rail mounting
Assembly note	alignable: 0 mm horizontally, 30 mm vertically
Mounting Position	horizontal DIN rail NS 35, EN 60715
With protective coating	no

Material specifications

Housing Material	Metal
Housing Material	Aluminum (AlMg3) / sheet steel, zinc-plated
Hood version	Stainless steel
Side element version	Aluminum
Foot latch material	Sheet steel, zinc-plated

Ambient conditions

Degree of Protection	IP20
Ambient Temperature (Operation)	-20 °C ... 70 °C (Derating >45°C: 2.5%/K)
Ambient temperature (storage/transport)	-40 °C ... 85 °C
Maximum altitude	≤ 5000 m (> 2000 m, Derating: 10 %/1000 m)
Climatic class	3K22 (in accordance with EN 60721-3-3)
Max. permissible relative humidity (operation)	≤ 95 % (at 25 °C, non-condensing)
Shock (operation)	15 ms, 15g, per spatial direction (IEC 60068-2-27)
Vibration (Operation)	10 Hz ... 50 Hz, amplitude ±0.2 mm
Vibration (Operation)	50 Hz ... 150 Hz, 2.3g, 90 min.
Temp code	T4 (-20 ... +70 °C; > 45 °C, Derating: 2,5 %/K)

Overvoltage category

EN 61010-1

II (≤ 3000 m)

Electrical safety

Standard designation	Electrical safety
Standards/specifications	IEC 61010-2-201 (SELV)

Safety for measurement, control, and laboratory equipment

Standard designation	Safety for equipment for measurement, control, and laboratory use
Standards/specifications	IEC 61010-1

Protective extra-low voltage

Standard designation	Protective extra-low voltage
Standards/specifications	IEC 61010-1 (SELV)
Standards/specifications	IEC 61010-2-201 (PELV)

Limitation of harmonic line currents

Standard designation	Limitation of harmonic line currents
Standards/specifications	EN 61000-3-2

Mains voltage dips

Standard designation	Requirement of the semiconductor industry with regard to mains voltage dips
Standards/specifications	SEMI F47 - 0706 (120 V AC)

Safe isolation

Standard designation	Safe isolation
Standards/specifications	IEC 61558-2-16
Note	Transformer

UL

Identification	UL/C-UL Listed UL 61010-1
Identification	UL/C-UL Listed UL 61010-2-201

CB scheme

Identification

CB scheme (IEC 61010-1, IEC 61010-2-201)

EMC data

Electromagnetic compatibility	Conformance with EMC Directive 2014/30/EU
Low Voltage Directive	Conformance with Low Voltage Directive 2014/35/EC
Interference emission	Interference emission in accordance with EN 61000-6-3 (residential and commercial) and EN 61000-6-4 (industrial)
EMC requirements for noise immunity	EN 61000-6-2
Conducted noise emission	EN 55016
Conducted noise emission	EN 61000-6-3 (Class B)
Noise emission	EN 55016
Noise emission	EN 61000-6-3 (Class B)

Harmonic currents

Standards/regulations	EN 61000-3-2
Standards/regulations	EN 61000-3-2 (Class A)
Frequency Range	0 kHz ... 2 kHz

Electrostatic discharge

Standards/regulations	EN 61000-4-2
Contact discharge	6 kV (Test Level 3)
Discharge in air	8 kV (Test Level 3)
Comments	Criterion A

Electromagnetic HF field

Standards/regulations	EN 61000-4-3
Frequency Range	80 MHz ... 1 GHz
Test field strength	10 V/m (Test Level 3)
Frequency Range	1 GHz ... 6 GHz
Test field strength	10 V/m (Test Level 3)
Frequency Range	2 GHz ... 3 GHz
Test field strength	1 V/m (Test Level 3)
Comments	Criterion A

Fast transients (burst)

Standards/regulations	EN 61000-4-4
Input	4 kV (Test Level 4 - asymmetrical)
Output	2 kV (Test Level 3 - asymmetrical)
Comments	Criterion A

Surge voltage load (surge)

Standards/regulations	EN 61000-4-5
Input	1 kV (Test Level 2 - symmetrical)
Input	2 kV (Test Level 3 - asymmetrical)
Output	0.5 kV (Test Level 1 - symmetrical)
Output	1 kV (Test Level 2 - asymmetrical)
Comments	Criterion B

Conducted interference

Standards/regulations	EN 61000-4-6
Input/Output	asymmetrical
Frequency Range	0.15 MHz ... 80 MHz
Comments	Criterion A
Voltage	10 V (Test Level 3)

Voltage dips

Standards/regulations	EN 61000-4-11
Voltage	230 V AC
Frequency	50 Hz
Voltage dip	70 %
Number of periods	25 periods
Comments	Criterion A
Voltage dip	40 %
Number of periods	12 periods
Comments	Criterion A
Voltage dip	0 %
Number of periods	1 period
Comments	Criterion A

Criteria

Criterion A	Normal operating behavior within the specified limits.
Criterion B	Temporary impairment to operational behavior that is corrected by the device itself.

Why Proax for Phoenix Contact 1234302?

Proax is an authorized distributor of Phoenix Contact 1234302 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.

Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!

Short Lead Time

Highly Trained Staff

Live Chat

Technical Support

Local Inventory

60+ Years Experience

Additional Information

Pack Size

Recommended

1234304
PS-EE-2G/1AC/24DC/240W/SC - Primary-switched power supply unit, ESSENTIAL POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 10 A, adjustable from 24 V DC ... 28 V DC
1234308
PS-EE-2G/1AC/24DC/480W/SC - Primary-switched power supply unit, ESSENTIAL POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 20 A, adjustable from 24 V DC ... 28 V DC
1394764
PS-EE-2G/1AC/24DC/60W/SC - Primary-switched power supply unit, ESSENTIAL POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 2.5 A, adjustable from 24 V DC ... 28 V DC
1234301
PS-EE-2G/1AC/24DC/75W/SC - Primary-switched power supply unit, ESSENTIAL POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 3.125 A, adjustable from 24 V DC ... 28 V DC

Not in stock

Request lead time or order—we'll ensure quick delivery

Phoenix Contact Availability