Official DistributorSKU
2.22 in. (56.4 mm) 5-Phase Stepper Motor with Encoder
The PKP Series 5-phase stepper motor offers superior performance, high torque while providing low vibration and low noise. Basic step angle is 0.72º (500 steps per rev).- 2.22 in. (56.4 mm) Frame Size
- Motor cable required for connection (see Accessories)
- DC Driver input type motor only
Technical Specifications
| Frame Size | 2.22 in |
| Output Shaft | Metric |
| Output Shaft Diameter | 8 mm |
| Motor Length | 2.19 in. |
| Basic Step Angle | 0.72º |
| Holding Torque | 62 oz-in |
| Current per Phase | 2.8 A/phase |
| Type | Standard |
| Shaft/Gear Type | Round Shaft with Flat (No Gearhead) |
| Gear Type | No Gearhead |
| Motor Connection Type | Flat Connector |
| Shaft | Single |
| Step Angle | 0.72 ° |
| Connection Type | New Pentagon (Bipolar) |
| Lead Wires | 5 |
| Rotor Inertia | 0.77 oz-in² |
| RoHS Compliant | These products do not contain substances that exceed the regulation values in the RoHS Directive. |
| Safety Standards | CE |
| Insulation resistance | 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. |
| Dielectric strength | No abnormalities are observed, even when applying voltage between the windings and the case for 1 minute under normal ambient temperature and humidity with the following conditions. 1 kVAC 50/60 Hz |
| Temperature Rise | Winding temperature rise 144ºF (80ºC) max. |
| Ambient temperature range | 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) |
| Ambient Humidity | 85% or less (Non-condensing) |
| Shaft Runout | 0.05 mm (0.002 in.) T.I.R. |
| Concentricity | 0.075 mm (0.003 in.) T.I.R. |
| Perpendicularity | 0.075 mm (0.003 in.) T.I.R. |
| Radial Play | 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.) |
| Axial Play | 0.075 mm (0.003 in.) maximum of 10 N (2.2 lb.) |
| Radial Load | 0 in. from Shaft End = 20 lb |
| Axial Load | 6.7 lb |
| Encoder Type | Incremental |
| Output | 3-Channel |
| Input Current (mA) | 30 mA max. |
| Input Voltage (V) | 5 VDC |
| Output Type | Line Driver |
Why Proax for Oriental Motor PKP564N28A2-R2GL?
Proax is the authorized distributor of Oriental Motor PKP564N28A2-R2GL. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Alternate Names | PKP564N28A2R2GL |
| Pack Size | 1 |
Recommended
