PKE599MC
Official DistributorSKU
ORIPKE599MC
3.35 in. (85 mm) 5-Phase Stepper Motor with Brake (AC Input)
The PKE series hybrid stepper motors are designed to provide high performance and energy savings. To achieve constant maximum torque output with lower heat generation and save energy, the motor losses have been substantially reduced allowing them to be operated for longer hours at high speed which is not possible with conventional stepper motors. For use with RKII Series Drivers.- Constant Duty
- Low Noise, Low Vibration
Technical Specifications
| Frame Size | 3.35 in |
| Motor Length | 3.86 in. |
| Holding Torque | 580 oz-in |
| Type | Standard |
| Shaft/Gear Type | Round Shaft with Flat (No Gearhead) |
| Encoder | Not Equipped |
| Shaft | Single |
| Electromagnetic Brake | Equipped |
| Power Input | AC |
| Current | 0.75 A |
| Basic Step Angle | 0.72º |
| Rotor Inertia | 18.1 oz-in² |
| Permissible Overhung Load | 0 in. from Shaft End = 58 lb |
| Permissible Thrust Load | 8.30 lb |
| RoHS Compliant | Yes |
| Safety Standards | UL |
| CE Marking | Low Voltage Directives |
| Radial Play | 0.001 inch (0.025 mm) max. of 1.12 lb. (5 N) |
| Axial Play | 0.003 in (0.075 mm) max. of 2.2 lb. (10 N) |
| Brake Type | Active when the power is off |
| Brake Power Supply | 24 VDC ± 5%, 0.42A |
| Insulation Resistance (Motor) | 100 MΩ or more when 500 VDC megger is applied between the following places:Case - Motor windings |
| Dielectric Strength (Motor) | Sufficient to withstand the following for 1 minute:Case - Motor windings 1.5 kVAC 50 Hz or 60 HzCase - Electromagnetic brake windings 1.5 kVAC 50 Hz or 60 Hz |
| Degree of Protection | IP20 |
| Ambient temperature range | +14 ~ +122ºF (-10 ~ +50ºC) (non-freezing) |
| Ambient Humidity | 85% or less (Non-condensing) |
| Operating Atmosphere | No corrosive gases, dust. Avoid contact with water or oil. |
| Temperature Rise | Temperature rise of the windings is 144ºF (80ºC) or less. Measured at rated current, at standstill, five phases energized measured (by resistance change method). |
| Shaft Runout | 0.002 in (0.05 mm) T.I.R. |
| Concentricity | 0.003 in. (0.075 mm) T.I.R. |
| Perpendicularity | 0.003 in. (0.075 mm) T.I.R. |
| Stop Position Accuracy | ±5 arc minutes (±0.084º) |
Why Proax for Oriental Motor PKE599MC?
Proax is the authorized distributor of Oriental Motor PKE599MC. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
