BLV510KM15S-1
Official DistributorSKU
ORIBLV510KM15S1
100 W (1/8 HP) Brushless DC Motor Speed Control System
The BLV Series brushless DC motor (BLDC motor) speed control system offers high performance and simple operation from a compact motor and driver.- Slim, Yet Powerful Design
- Wide Speed Range
- DC Input
- Battery drive function
- Communication through I/O or RS-485 available
- 3.3 ft. (1 m) Cable Included
Technical Specifications
| Motor Type | Brushless DC Motor |
| Motor Frame Size | 3.54 in. |
| Output Power | 100 W (1/8 HP) |
| Power Supply | 24 VDC |
| Shaft/Gear Type | Parallel Shaft Gearhead |
| Gear Ratio (X:1) | 15 :1 |
| Output Shaft Diameter | 18 mm |
| Rated Torque | 47 lb-in |
| Electromagnetic Brake | Equipped |
| Brake Type | Power off activated type, automatically controlled by the driver. |
| Cable Length (Included) | 1 m (3.3 ft.) |
| Variable Speed Range (r/min) | 6.7 ~ 200 |
| Permissible Load Inertia | 2300 oz-in² |
| Permissible Overhung Load | 0.39 in. from Shaft End = 90 lb |
| Permissible Thrust Load | 33 lb |
| Type | Cable |
| Speed Control Method (Select one of the following) | Internal potentiometer |
| Number of Speed Settings | 2 Standard / 8 with MEXE02 Softwre or OPX-2A Controller |
| Instantaneous Stop | Yes |
| Multi-Axes Control | Yes |
| Alarm Output | Yes |
| Power Input | DC |
| Max. Extension Length (m) | 1.5 |
| Components | BLVM510KM-GFS [Motor]GFS5G15 [Gearhead]BLVD10KM [Driver]CC01BLV3M [Cable] |
| RoHS Compliant | Yes |
| Safety Standards | CE |
| CE Marking | EMC Directives |
| Insulation Class | [Motor] EN: Class E [120ºC (248ºF)] |
| Insulation Resistance (Motor) | 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after continuous operation under normal ambient temperature and humidity. |
| Insulation Resistance (Driver) | 100 M Ω or more when 500 VDC megger is applied between the power supply terminal and heat radiation plate after continuous operation under normal ambient temperature and humidity. |
| Dielectric Strength (Motor) | Sufficient to withstand 0.5 kVAC at 50Hz applied between the windings and the frame for 1 minute after continuous operation under normal ambient temperature and humidity. |
| Dielectric Strength (Driver) | Sufficient to withstand 0.5 kVAC at 50Hz applied between the power supply terminal and the heat radiation plate for 1 minute after continuous operation under normal ambient temperature and humidity. |
| Ambient temperature range | 0ºC ~ +40ºC (+32ºF ~ +104ºF) (nonfreezing) |
| Ambient Humidity | 85% max. (noncondensing) |
| Operating Atmosphere | No corrosive gases or dust. Cannot be used in radioactive area, magnetic field, vacuum or other special environment. |
| Degree of Protection | [Driver] IP20 |
| Degree of Protection (Motor) | IP65 |
| Communication Protocol | Modbus Protocol (Modbus RTU mode) |
| Electrical Characteristics | Complies with EIA-485The maximum total length of communicatoin cable is 50 m when using twisted-pair wire (TIA/EIA-568B CAT5e or better recommended) |
| Transmission/Reception Mode | Half duplex |
| Baud Rate | 625000 bps |
| Physical Layer | Start-stop synchronization (data: 8 bits, stop bit: 1 bit, parity: none) |
Why Proax for Oriental Motor BLV510KM15S-1?
Proax is the authorized distributor of Oriental Motor BLV510KM15S-1. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Alternate Names | BLV510KM15S1 |
| Pack Size | 1 |
Recommended
