BLMR5100KM-10FR-B
Official DistributorSKU
ORIBLMR5100KM10FRB
100 W (1/8 HP) Brushless DC Motor, Hollow Shaft Flat Gearhead (10:1 Gear Ratio)
The BLV Series R Type brushless DC motor (BLDC motor) speed control system offers the design of motor and driver significantly reduced in size and weight, yet high-power, and contributes to the battery driven automation.- 24 - 48 VDC
- Battery-operated
- Compact and Lightweight
- 1.64 ft. (0.5 m) Cable Included
Technical Specifications
| Motor Type | Brushless DC Motor |
| Motor Frame Size | 3.54 in. |
| Output Power | 100 W (1/8 HP) |
| Shaft/Gear Type | Hollow Shaft Flat Gearhead |
| Gear Ratio (X:1) | 10 :1 |
| Output Shaft Diameter | 20 mm |
| Rated Torque | 23 lb-in |
| Electromagnetic Brake | Equipped |
| Brake Type | Power off activated type, automatically controlled by driver |
| Cable Direction | Opposite Output Shaft Side |
| Cable Length (Included) | 1.64 ft. (0.5 m) |
| Variable Speed Range (r/min) | 0.1 ~ 400 |
| Resolution | 0.01º (36000 Pulses per rotation) |
| Permissible Load Inertia | 12600 oz-in² |
| Permissible Overhung Load | 0.39 in. from Shaft End (3000 r/min) = 200 lb |
| Permissible Thrust Load | 112 lb |
| Power Input | DC |
| Components | BLMR5100KM-GFV-B [Motor] |
| Safety Standards | UL |
| Insulation Class | [Motor] UL / CSA Standards: 105 (A), EN Standards: 120 (E) |
| Insulation Resistance (Motor) | 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after continuous operation under normal ambient temperature and humidity. |
| Dielectric Strength (Motor) | Sufficient to withstand 0.5 kVAC at 50Hz applied between the windings and the frame for 1 minute after continuous operation under normal ambient temperature and humidity. |
| Temperature Rise (Motor) | The temperature rise of the windings is 60ºC (108ºF) max. and that of the case surface is 50ºC (90ºF) max measured by the thermocouple method after rated continuous operation under normal ambient temperature and humidity |
| Altitude | Up to 1000 m (3300 ft. ) above sea level |
| Vibration | Not subject to continuous vibration or excessive impact. In conformance with JIS C 60068-2-6 "Sine-wav vibration test method"Frequency Range: 10 Hz to 55 Hz Pulsating Amplitude: 0.15 mm (0.006 in.)Sweep Direction: 3 directions (X, Y, Z) Number of Sweeps: 20 times |
| Ambient temperature range | 0ºC ~ +40ºC (+32ºF ~ +104ºF) (nonfreezing) |
| Ambient Humidity | 85% max. (noncondensing) |
| Operating Atmosphere | No corrosive gases or dust. This product should not be exposed to oil. Cannot be used in radioactive area, magnetic field, vacuum or other special environment. |
| Degree of Protection | [Motor] IP40 |
Why Proax for Oriental Motor BLMR5100KM-10FR-B?
Proax is the authorized distributor of Oriental Motor BLMR5100KM-10FR-B. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Alternate Names | BLMR5100KM10FRB |
| Pack Size | 1 |
Recommended
