Official Distributor
SKU
MPN
FL WLAN 1011
Weight
0.263 kg
Series FL-WLAN
FL WLAN 1011 - Wireless module
WLAN access point, client for USA and Canada, with 2 external antenna connections (RSMA-F), IP20, WLAN 802.11 a, b, g, n, frequency: 2.4 GHz, 5 GHz, connections: COMBICON 9 V DC ... 32 V DC, RJ45: for LAN, web, http/https, CLI, REST API
Technical Specifications
Trade restriction
CE note | The products are offered exclusively for export outside the EU and the European Economic Area. |
Product properties
Application | Ethernet |
Type | Stand-Alone |
Insulation characteristics
Pollution degree | 2 |
Wireless card
Number | 1 |
Type | IEEE 802.11 a/b/g/n 2.4 GHz and 5 GHz to 300 Mbps |
Assembly instructions | Permanently installed |
Electrical properties
Maximum power dissipation for nominal condition | 3.6 W |
Supply: Module electronics
Connection technology | COMBICON |
Connection Method | Push-in spring connection |
Note on the connection method | Recommended conductor cross section: 0.75 mm² |
Note on the connection method | Recommended ferrule: connection length 10 mm |
Note on the connection method | Recommended crimping pliers: trapezoidal or square |
Designation | 1128752 FMC 1,5/ 3-ST-3,5-RF GY35BD1-3 |
Number of Positions | 3 |
Cross section range AWG | 24 ... 16 (Use copper wires rated 75° C (UL)) |
Supply Voltage | 24 V DC (SELV) |
Supply Voltage Range | 9 V DC ... 32 V DC (PELV/SELV) |
Supply current | typ. 150 mA (at 24 V DC) |
Current consumption | max. 550 mA (at 9 V DC) |
1128752 FMC 1,5/ 3-ST-3,5-RF GY35BD1-3
Connection Method | Push-in spring connection |
Conductor cross section, rigid | 0.2 mm² ... 1.5 mm² |
Conductor cross section, flexible | 0.2 mm² ... 1.5 mm² |
Conductor cross section AWG | 24 ... 16 |
Stripping length | 10 mm |
Antenna
Number | 2 |
Functions
Configuration | Web-based management, automated CLI |
Quality of service (QoS) | Yes |
Security | 802.11i |
Security | WPA PSK (preshared key) |
Security | WPA2 |
Security | AES |
Security | TKIP |
Security | MAC filter |
Security | Supports 802.1X/RADIUS |
Wireless licenses | USA, Canada |
Ethernet (RJ45)
Number of interfaces | 1 |
Connection Method | RJ45 |
Note on the connection method | Auto negotiation and autocrossing |
Transmission Speed | 10/100 Mbps |
Transmission physics | Copper |
Transmission length | 100 m (per segment) |
No. of channels | 1 (RJ45 ports) |
Wireless
Designation | Wireless LAN |
Antenna Connection Method | RSMA (female) |
Frequency band | 2.4 GHz |
Frequency band | 5 GHz |
Wireless Standard | WLAN |
Wireless Standard | IEEE 802.11 |
Wireless Standard | a |
Wireless Standard | b |
Wireless Standard | g |
Wireless Standard | n |
Transmission power | max. 19 dBm (with two antennas) |
Number of wireless interfaces | 1 IEEE 802. 11 a/b/g/n |
Wireless modules that can be connected | 10 (In Access Point mode max. 2 SSIDs) |
Dimensions
Width | 63 mm |
Height | 26 mm |
Depth | 113 mm |
Note on dimensions | Installed dimensions without connector |
Material specifications
Material base plate | Die-cast zinc, nickel-plated |
Housing Material | Polycarbonate, PC |
Ambient conditions
Degree of Protection | IP20 |
Ambient Temperature (Operation) | 0 °C ... 60 °C |
Air pressure (operation) | 800 hPa ... 1080 hPa (up to 2000 m above sea level) |
Air pressure (storage/transport) | 660 hPa ... 1080 hPa (up to 3500 m above sea level) |
Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Permissible humidity (operation) | 5 % ... 95 % (non-condensing) |
Permissible humidity (storage/transport) | 5 % ... 95 % (non-condensing) |
Electrostatic discharge
Standards/regulations | EN 61000-4-2 |
Contact discharge | ± 6 kV |
Discharge in air | ± 8 kV |
Indirect discharge | ± 6 kV |
Electromagnetic HF field
Standards/regulations | EN 61000-4-3 |
Frequency Range | 80 MHz ... 1000 MHz |
Test field strength | 10 V/m |
Frequency Range | 1000 MHz ... 6000 MHz |
Test field strength | 3 V/m |
Fast transients (burst)
Standards/regulations | EN 61000-4-4 |
Comments | ±2.2 kV |
Surge current load (surge)
Standards/regulations | EN 61000-4-5 |
Signal | ± 0.5 kV (symmetrical) |
Signal | ± 1 kV (asymmetrical) |
Conducted interference
Standards/regulations | EN 61000-4-6 |
Frequency Range | 0.15 MHz ... 80 MHz |
Voltage | 10 V |
Emitted interference
Standards/regulations | EN 55022 |
Test result | Class B |
Standards/regulations | FCC/CFR 47, Part 15.109 |
Test result | Class A |
Standards/regulations | ICES-003 Issue 6 section 6.1 |
Test result | Class B |
Standards/regulations | ICES-003 Issue 6 section 6.2 |
Test result | Class A |
Mounting
Mounting Type | Wall mounting, optional DIN rail adapter |
Assembly instructions | Antennas not included in scope of supply |
Why Proax for Phoenix Contact 2702900?
Proax is an authorized distributor of Phoenix Contact 2702900 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
Pack Size | 1 |
Recommended