Official DistributorSKU
MPN
SACB-PT-H180- 8/3-M8 HD
Weight
0.072 kg
This product is Not Cancellable/Not Returnable
Connector hood - SACB-PT-H180- 8/3-M8 HD
Connector hood, application: Standard, connection method: M8 socket Metal, number of slots: 8, number of positions: 3, slot assignment: single, status display: No, Universal; master cable connection: Plug-in push-in spring-cage connection 180°, shielding: no
- Flexible, distributed bundling of signals in one master cable
Technical Specifications
General
| Rated voltage | 24 V DC |
| Max. operating voltage Umax | 30 V DC |
| Current carrying capacity per I/O signal | 2 A |
| Current carrying capacity per slot | 2 A |
| Total rated current | 8 A |
| Number of Positions | 3 |
| Number of slots | 8 |
| Sensor/actuator connection system | M8 socket |
| Note | NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. |
Ambient conditions
| Degree of Protection | IP67 |
| Ambient Temperature (Operation) | -25 °C ... 80 °C |
Master cable data/connection data
| Connection Method | Plug-in push-in spring-cage connection |
| Conductor cross section min. (signal) | 0.2 mm² |
| Conductor cross section max. (signal) | 1.5 mm² |
| Conductor cross section AWG min. (signal) | 24 |
| Conductor cross section AWG max. (signal) | 16 |
| Stripping length (signal) | 10 mm |
| Conductor cross section min. (energy) | 0.2 mm² |
| Conductor cross section max. (energy) | 1.5 mm² |
| Conductor cross section AWG min. (energy) | 24 |
| Conductor cross section AWG max. (energy) | 16 |
| Stripping length | 70 mm (Master cable) |
| Tightening torque, cover screw | 1 Nm |
Conductor data
| Minimum external conductor diameter | 6 mm |
| Maximum external conductor diameter | 12 mm |
| Tightening torque, union nut | 2.5 Nm |
| Wrench size, union nut | 24 mm |
Insulation material
| Housing Material | PBT |
| Material of contact, master cable side | CU alloy |
| Material of contact surface, master cable side | tin-plated |
| Material of the contact carrier on the master cable side | PA |
| Sealing material | CR/NBR (Cable gland) |
| Material | PA 6 (Cable gland) |
Pin assignment
| Slot/position = Wire color or connection | 1 / 4 (A) = 1 / 4 |
| Slot/position = Wire color or connection | 2 / 4 (A) = 2 / 4 |
| Slot/position = Wire color or connection | 3 / 4 (A) = 3 / 4 |
| Slot/position = Wire color or connection | 4 / 4 (A) = 4 / 4 |
| Slot/position = Wire color or connection | 5 / 4 (A) = 5 / 4 |
| Slot/position = Wire color or connection | 6 / 4 (A) = 6 / 4 |
| Slot/position = Wire color or connection | 7 / 4 (A) = 7 / 4 |
| Slot/position = Wire color or connection | 8 / 4 (A) = 8 / 4 |
| Slot/position = Wire color or connection | 1-8 / 1 (+ 24 V) = UN |
| Slot/position = Wire color or connection | 1-8 / 3 (0 V) = 0 V |
Accessories
1517592 - Master cable for sensor/actuator boxes, without PE conductor, unshielded, material PUR/PVC, 10-pos., 8 x 0.34 mm2 and 2 x 0.75 mm2, length: 50 m
1212315 - Torque screwdriver, with preset torque of 2.5 Nm and 4 mm hexagonal drive for the pressure nut of the connector hood
1206463 - Screwdriver, PZ crosshead, VDE insulated, size: PZ 2 x 100 mm, 2-component grip, with non-slip grip
0803204 - UniCard materials for thermal transfer printers, for marking terminal blocks from Weidmüller, Conta Clip, and Klemsan, 72-section, offset foot, can be marked with THERMOMARK CARD and BLUEMARK, color: white
0829237 - UniCard materials for thermal transfer printers, for labeling Weidmüller, Conta Clip, and Klemsan terminal blocks with horizontal marker groove, 72-section, can be labeled with THERMOMARK CARD and BLUEMARK LED, color: white
1205037 - Screwdriver, slot-headed, VDE insulated, size: 0.4 x 2.5 x 80 mm, 2-component grip, with non-slip grip
1212607 - Screw bit, slotted, E6.3-1/4" drive, size: 0.45 x 2.4 x 70 mm, hardened, suitable for holder according to DIN 3126-F6.3/ISO 1173
1212070 - Bit screwdriver, with 1/4" quick-action chuck, handle length 119 mm, 2-component handle, with non-slip grip, suitable for bits according to DIN 3126-C 6.3 and E 6.3/ISO 1173, magnetic
Why Proax for Phoenix Contact 1197657?
Proax is an authorized distributor of Phoenix Contact 1197657 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 1 |
Recommended
1407295 - Distributor box, connection method: M12 socket Stainless steel, number of slots: 8, number of positions: 5, coding: A, slot assignment: parallel, status display: No, Universal, shielding: yes- 1401261 - Distributor box, connection method: M12 socket Stainless steel, number of slots: 8, number of positions: 5, coding: A, slot assignment: parallel, status display: No, Universal, shielding: yes