Official DistributorSKU
MPN
REL-MR-BL-110DC/21HC
Weight
0.015 kg
Series REL-MR-BL
REL-MR-BL-110DC/21HC - Single relay
Pluggable miniature power relay in basic design, with power contact for high continuous currents, 1 changeover contact, input voltage 110 V DC
Technical Specifications
Product properties
| Operating mode | 100% operating factor |
| Mechanical service life | 1x 107 cycles |
Insulation characteristics
| Insulation | Basic insulation |
| Insulation | Basic insulation |
| Overvoltage category | III |
| Pollution degree | 3 |
Electrical properties
| Service life electrical | see diagram |
| Maximum power dissipation for nominal condition | 0.4 W |
| Test voltage (Winding/contact) | 5 kV AC (50 Hz, 1 min., winding/contact) |
| Rated Insulation Voltage | 250 V AC |
| Rated surge voltage | 4 kV |
Coil side
| Nominal input voltage UN | 110 V DC |
| Input voltage range | 77 V DC ... 247.5 V DC |
| Drive and function | monostable |
| Drive (polarity) | non-polarized |
| Typical input current at UN | 3.8 mA |
| Typical response time | 8 ms |
| Typical release time | 6 ms |
| Coil Voltage | 110 V DC |
| Coil resistance | 28.8 kΩ ±12 % |
Switching
| Contact switching type | 1 changeover contact |
| Type of switch contact | Single contact |
| Contact Material | AgNi |
| Maximum Switching Voltage | 250 V AC/DC |
| Minimum Switching Voltage | 5 V (At 24 mA) |
| Limiting Continuous Current | 16 A |
| Maximum Inrush Current | 30 A (300 ms) |
| Min. switching current | 10 mA (at 12 V) |
| Interrupting rating (ohmic load) max. | 384 W (at 24 V DC) |
| Interrupting rating (ohmic load) max. | 58 W (at 48 V DC) |
| Interrupting rating (ohmic load) max. | 48 W (at 60 V DC) |
| Interrupting rating (ohmic load) max. | 50 W (at 110 V DC) |
| Interrupting rating (ohmic load) max. | 80 W (at 220 V DC) |
| Interrupting rating (ohmic load) max. | 4000 VA (for 250 V AC) |
| Switching capacity | 2 A (at 24 V, DC13) |
| Switching capacity | 1.5 A (at 230 V, AC15) |
Connection data
| Connection Method | Plug / solder connection |
Dimensions
| Width | 12.7 mm |
| Height | 29 mm |
| Depth | 15.7 mm |
Material specifications
| Color | orange (RAL 2003) |
Ambient conditions
| Degree of Protection | RT II |
| Ambient Temperature (Operation) | -40 °C ... 85 °C |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
Corrosive gas test
| Identification | ISA-S71.04. G3 Harsh Group |
| Identification | EN 60068-2-60 |
Standards and Regulations
| Standards/regulations | IEC 60664 |
| Standards/regulations | EN 61810-1 |
Mounting
| Mounting Type | Plug-in mounting |
| Mounting Position | any |
Why Proax for Phoenix Contact 1109539?
Proax is an authorized distributor of Phoenix Contact 1109539 and one of Phoenix Contact's largest distributors in North America. Our highly skilled in-house technical team is ready to assist with any technical needs.
Have a question in mind? to help you get the right product as quickly as possible for your project. We're always here to help!
Short Lead Time
Highly Trained Staff
Live Chat
Technical Support
Local Inventory
60+ Years Experience
Additional Information
| Pack Size | 20 |
Recommended
